kernel/linux.git/drivers/reset/Kconfig, branch v5.19

Merge tag 'ti-driver-soc-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/drivers

2022-05-09T21:09:10+00:00

TI Driver updates for v5.19 * wkup_m3: io isolation, voltage scaling, vtt regulator and a debug option to stop m3 in suspend. * tisci: support for polled mode for system suspend, reset driver is now enabled for COMPILE_TEST * knav, dma.. misc cleanups for IS_ERR, pm_run_time*, and various other fixups. * tag 'ti-driver-soc-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: soc: ti: wkup_m3_ipc: Add debug option to halt m3 in suspend soc: ti: wkup_m3_ipc: Add support for i2c voltage scaling soc: ti: wkup_m3_ipc: Add support for IO Isolation soc: ti: knav_qmss_queue: Use IS_ERR instead of IS_ERR_OR_NULL when checking knav_queue_open() result soc: ti: pm33xx: using pm_runtime_resume_and_get instead of pm_runtime_get_sync firmware: ti_sci: Switch transport to polled mode during system suspend soc: ti: wkup_m3_ipc: Add support for toggling VTT regulator soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync soc: ti: knav_dma: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync reset: ti-sci: Allow building under COMPILE_TEST soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc soc: ti: omap_prm: Use of_device_get_match_data() soc: ti: pruss: using pm_runtime_resume_and_get instead of pm_runtime_get_sync soc: ti: replace usage of found with dedicated list iterator variable soc: ti: wkup_m3_ipc: fix platform_get_irq.cocci warning Link: https://lore.kernel.org/r/20220507163424.pvqnwrxpoo73lmp2@debtless Signed-off-by: Arnd Bergmann

reset: Kconfig: Make RESET_RZG2L_USBPHY_CTRL depend on ARCH_RZG2L

2022-05-03T15:41:28+00:00

The USBPHY Control block is identical on Renesas RZ/G2L and RZ/V2L SoC's, so instead of adding dependency for each SoC's add dependency on ARCH_RZG2L. The ARCH_RZG2L config option is already selected by ARCH_R9A07G044 and ARCH_R9A07G054. Signed-off-by: Lad Prabhakar Signed-off-by: Philipp Zabel Link: https://lore.kernel.org/r/20220406071647.14037-1-prabhakar.mahadev-lad.rj@bp.renesas.com

reset: ti-sci: Allow building under COMPILE_TEST

2022-04-15T20:03:20+00:00

Since commit 043cfff99a18 ("firmware: ti_sci: Fix compilation failure when CONFIG_TI_SCI_PROTOCOL is not defined") it is possible to build reset-ti-sci under CONFIG_COMPILE_TEST. Signed-off-by: Philipp Zabel Signed-off-by: Nishanth Menon Link: https://lore.kernel.org/r/20220404094500.2708816-1-p.zabel@pengutronix.de

reset: Add Delta TN48M CPLD reset controller

2022-02-25T08:59:35+00:00

Delta TN48M CPLD exposes resets for the following: * 88F7040 SoC * 88F6820 SoC * 98DX3265 switch MAC-s * 88E1680 PHY-s * 88E1512 PHY * PoE PSE controller Controller supports only self clearing resets. Reviewed-by: Philipp Zabel Reviewed-by: Andy Shevchenko Signed-off-by: Robert Marko Link: https://lore.kernel.org/r/20220131133049.77780-5-robert.marko@sartura.hr Signed-off-by: Greg Kroah-Hartman

reset: starfive-jh7100: Add StarFive JH7100 reset driver

2021-12-16T16:24:23+00:00

Add a driver for the StarFive JH7100 reset controller. Reviewed-by: Andy Shevchenko Signed-off-by: Emil Renner Berthing

Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-11-04T00:00:52+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "These are all the driver updates for SoC specific drivers. There are a couple of subsystems with individual maintainers picking up their patches here: - The reset controller subsystem add support for a few new SoC variants to existing drivers, along with other minor improvements - The OP-TEE subsystem gets a driver for the ARM FF-A transport - The memory controller subsystem has improvements for Tegra, Mediatek, Renesas, Freescale and Broadcom specific drivers. - The tegra cpuidle driver changes get merged through this tree this time. There are only minor changes, but they depend on other tegra driver updates here. - The ep93xx platform finally moves to using the drivers/clk/ subsystem, moving the code out of arch/arm in the process. This depends on a small sound driver change that is included here as well. - There are some minor updates for Qualcomm and Tegra specific firmware drivers. The other driver updates are mainly for drivers/soc, which contains a mixture of vendor specific drivers that don't really fit elsewhere: - Mediatek drivers gain more support for MT8192, with new support for hw-mutex and mmsys routing, plus support for reset lines in the mmsys driver. - Qualcomm gains a new "sleep stats" driver, and support for the "Generic Packet Router" in the APR driver. - There is a new user interface for routing the UARTS on ASpeed BMCs, something that apparently nobody else has needed so far. - More drivers can now be built as loadable modules, in particular for Broadcom and Samsung platforms. - Lots of improvements to the TI sysc driver for better suspend/resume support" Finally, there are lots of minor cleanups and new device IDs for amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape, allwinner, broadcom, and omap" * tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits) optee: Fix spelling mistake "reclain" -> "reclaim" Revert "firmware: qcom: scm: Add support for MC boot address API" qcom: spm: allow compile-testing firmware: arm_ffa: Remove unused 'compat_version' variable soc: samsung: exynos-chipid: add exynosautov9 SoC support firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: aspeed: Add UART routing support soc: fsl: dpio: rename the enqueue descriptor variable soc: fsl: dpio: use an explicit NULL instead of 0 ...

reset: mchp: sparx5: Extend support for lan966x

2021-10-18T12:09:57+00:00

This patch extends sparx5 driver to support also the lan966x. The process to reset the switch is the same only it has different offsets. Therefore make the driver more generic and add support for lan966x. Signed-off-by: Horatiu Vultur Reviewed-by: Andrew Lunn Reviewed-by: Steen Hegelund Reviewed-by: Philipp Zabel Link: https://lore.kernel.org/r/20211018091522.1113510-3-horatiu.vultur@microchip.com Signed-off-by: Philipp Zabel

reset: Allow building Broadcom STB RESCAL as module

2021-10-05T09:56:25+00:00

The driver can be built as a module and uses device managed resources. Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20210924030840.9650-1-f.fainelli@gmail.com Signed-off-by: Philipp Zabel

reset: pistachio: Re-enable driver selection

2021-10-05T08:49:40+00:00

After the retirement of MACH_PISTACHIO, the Pistachio Reset Driver is no longer auto-enabled when building a kernel for Pistachio systems. Worse, the driver cannot be enabled by the user at all (unless compile-testing), as the config symbol is invisible. Fix this partially by making the symbol visible again when compiling for MIPS, and dropping the useless default. The user still has to enable the driver manually when building a kernel for Pistachio systems, though. Fixes: 104f942b2832ab13 ("MIPS: Retire MACH_PISTACHIO") Signed-off-by: Geert Uytterhoeven Reviewed-by: Rahul Bedarkar Reviewed-by: Jiaxun Yang Link: https://lore.kernel.org/r/2c399e52540536df9c4006e46ef93fbccdde88db.1631610825.git.geert+renesas@glider.be Signed-off-by: Philipp Zabel

Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-09-01T22:25:28+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...