kernel/linux.git/drivers/reset/Kconfig, branch master

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2026-04-21T15:33:26+00:00

Pull clk updates from Stephen Boyd: "We've finally gotten rid of the struct clk_ops::round_rate() code after months of effort from Brian Masney. Now the only option is to use determine_rate(), which is good because that takes a struct argument instead of just a couple unsigned longs, allowing us to easily modify the way we determine and set rates in the clk tree. Beyond that core framework change we've got the typical pile of new SoC clk driver additions, fixes for clk data and/or adding missing clks because the consumer driver using those clks wasn't ready, etc. The usual suspects are all here: Qualcomm, Samsung, Mediatek, and Rockchip along with some newcomers making RISC-V SoCs like ESWIN's eic700 and Tenstorrent's Atlantis. The clk driver side of this looks pretty normal. Core: - Remove the round_rate() clk op (yay!) New Drivers: - ESWIN eic700 SoC clk support - Econet EN751221 SoC clock/reset support - Global TCSR, RPMh, and display clock controller support for the Qualcomm Eliza platform - TCSR, the multiple global, and the RPMh clock controller support for the Qualcomm Nord platform - GPU clock controller support for Qualcomm SM8750 - Video and GPU clock controller support for Qualcomm Glymur - Global clock controller support for Qualcomm IPQ5210 - Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock controllers on the SoC - ExynosAutov920: Add G3D (GPU) clock controller - Clock driver for the Rockchip RV1103B SoC - Initial support for the Renesas RZ/G3L (R9A08G046) SoC - Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits) clk: visconti: pll: initialize clk_init_data to zero clk: fsl-sai: Add MCLK generation support clk: fsl-sai: Extract clock setup into fsl_sai_clk_register() dt-bindings: clock: fsl-sai: Document clock-cells = <1> support clk: fsl-sai: Add i.MX8M support with 8 byte register offset clk: fsl-sai: Sort the headers dt-bindings: clock: fsl-sai: Document i.MX8M support clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC clk: qcom: rpmh: Add support for Nord rpmh clocks clk: qcom: Add TCSR clock driver for Nord SoC dt-bindings: clock: qcom: Add Nord Global Clock Controller dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON clk: qcom: Constify list of critical CBCR registers clk: qcom: Constify qcom_cc_driver_data clk: qcom: videocc-glymur: Constify qcom_cc_desc clk: qcom: Add a driver for SM8750 GPU clocks dt-bindings: clock: qcom: Add SM8750 GPU clocks clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support ...

Merge tag 'mips_7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2026-04-17T15:53:23+00:00

Pull MIPS updates from Thomas Bogendoerfer: - Support for Mobileye EyeQ6Lplus - Cleanups and fixes * tag 'mips_7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) MIPS/mtd: Handle READY GPIO in generic NAND platform data MIPS/input: Move RB532 button to GPIO descriptors MIPS: validate DT bootargs before appending them MIPS: Alchemy: Remove unused forward declaration MAINTAINERS: Mobileye: Add EyeQ6Lplus files MIPS: config: add eyeq6lplus_defconfig MIPS: Add Mobileye EyeQ6Lplus evaluation board dts MIPS: Add Mobileye EyeQ6Lplus SoC dtsi clk: eyeq: Add Mobileye EyeQ6Lplus OLB clk: eyeq: Adjust PLL accuracy computation clk: eyeq: Skip post-divisor when computing PLL frequency pinctrl: eyeq5: Add Mobileye EyeQ6Lplus OLB pinctrl: eyeq5: Use match data reset: eyeq: Add Mobileye EyeQ6Lplus OLB MIPS: Add Mobileye EyeQ6Lplus support dt-bindings: soc: mobileye: Add EyeQ6Lplus OLB dt-bindings: mips: Add Mobileye EyeQ6Lplus SoC MIPS: dts: loongson64g-package: Switch to Loongson UART driver mips: pci-mt7620: rework initialization procedure mips: pci-mt7620: add more register init values ...

reset: eyeq: Add Mobileye EyeQ6Lplus OLB

2026-04-13T13:31:40+00:00

Declare the two reset domains found in the EyeQ6Lplus OLB and add them to the data matched by 'mobileye,eyeq6lplus-olb' compatible. Those reset domains are identical to those present in the EyeQ5 OLB, so no changes are needed to support them. Also select reset-eyeq for all EYEQ SoCs instead of listing each one individually, as it is needed by all Mobileye EyeQ SoC. Reviewed-by: Philipp Zabel Signed-off-by: Benoît Monin Signed-off-by: Thomas Bogendoerfer

reset: rzv2h-usb2phy: Add support for VBUS mux controller registration

2026-04-01T16:16:09+00:00

The RZ/V2H USB2 PHY requires control of the VBUS selection line (VBENCTL) through a mux controller described in the device tree as "mux-controller". This change adds support for registering the rzv2h-usb-vbenctl auxiliary driver during probe. This enables proper management of USB2.0 VBUS source selection on platforms using the RZ/V2H SoC. Reviewed-by: Philipp Zabel Signed-off-by: Tommaso Merciai Signed-off-by: Philipp Zabel

reset: rzv2h-usb2phy: Convert to regmap API

2026-04-01T16:15:59+00:00

Replace raw MMIO accesses (readl/writel) with regmap_read() and regmap_multi_reg_write() via devm_regmap_init_mmio(). Drop the manual spinlock as regmap provides internal locking. Replace the custom rzv2h_usb2phy_regval struct with the standard reg_sequence, and encode assert/deassert sequences as reg_sequence arrays rather than individual scalar fields in the of_data descriptor. Use the reg_sequence .delay_us field to encode the 11 µs post-assert delay, replacing the explicit usleep_range(11, 20) call in rzv2h_usbphy_reset_assert(). Select REGMAP_MMIO in Kconfig. Signed-off-by: Tommaso Merciai Reviewed-by: Philipp Zabel Signed-off-by: Philipp Zabel

reset: tenstorrent: Add reset controller for Atlantis

2026-03-10T03:10:26+00:00

Adds Atlantis Reset Controller driver, which shares the same regmap as prcm ( clock controller). This version of the reset controller driver covers resets from the RCPU prcm. Reviewed-by: Philipp Zabel Acked-by: Philipp Zabel Signed-off-by: Anirudh Srinivasan Reviewed-by: Drew Fustini Signed-off-by: Drew Fustini

reset: add Sky1 soc reset support

2026-03-09T11:07:11+00:00

Add support for the resets on Cix's Sky1 SoC. There are two reset controllers on Cix Sky1 Soc. One is located in S0 domain, and the other is located in S5 domain. Signed-off-by: Gary Yang Reviewed-by: Philipp Zabel Signed-off-by: Philipp Zabel

reset: Create subdirectory for SpacemiT drivers

2026-01-24T15:53:02+00:00

Create a dedicated subdirectory for SpacemiT reset drivers to allow for better organization as support for more SoCs is added. Move the existing K1 reset driver into this new directory and rename it to reset-spacemit-k1.c. Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the clock driver to register reset devices as an auxiliary device, so the default should reflect this dependency. Also sort the drivers/reset/Kconfig entries alphabetically. Reviewed-by: Alex Elder Signed-off-by: Guodong Xu Reviewed-by: Yixun Lan Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1] Signed-off-by: Philipp Zabel

reset: canaan: k230: drop OF dependency and enable by default

2026-01-24T15:45:19+00:00

The driver doesn't use any symbols depending on CONFIG_OF, so drop the dependency. Also, enable it by default when ARCH_CANAAN is selected. Fixes: 360a7a647759 ("reset: canaan: add reset driver for Kendryte K230") Signed-off-by: Junhui Liu Signed-off-by: Philipp Zabel

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2025-12-08T00:38:52+00:00

Pull clk updates from Stephen Boyd: "This is entirely SoC clk drivers. The majority diff wise is for the new Rockchip and Qualcomm clk drivers which is mostly lines and lines of data structures to describe the clk hardware in these SoCs. Beyond those two, Renesas continues to incrementally add clks to their SoC drivers, causing them to show up higher in the diffstat this time because they added quite a few clks all over the place. Overall it is a semi-quiet release that has some new clk drivers and the usual fixes for clock data that was wrong or missing and non-critical cleanups that plug error paths or fix typos. New Drivers: - Qualcomm IPQ5424 Network Subsystem Clock Controller - Qualcomm SM8750 Video Clock Controller - Rockchip RV1126B and RK3506 clock drivers - i.MX8ULP SIM LPAV clock driver - Samsung ACPM (firmware interface) clock driver - Altera Agilex5 clock driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits) clk: keystone: fix compile testing clk: keystone: syscon-clk: fix regmap leak on probe failure clk: qcom: Mark camcc_sm7150_hws static clk: samsung: exynos-clkout: Assign .num before accessing .hws clk: rockchip: Add clock and reset driver for RK3506 dt-bindings: clock: rockchip: Add RK3506 clock and reset unit clk: actions: Fix discarding const qualifier by 'container_of' macro clk: spacemit: Set clk_hw_onecell_data::num before using flex array clk: visconti: Add VIIF clocks dt-bindings: clock: tmpv770x: Add VIIF clocks dt-bindings: clock: tmpv770x: Remove definition of number of clocks clk: visconti: Do not define number of clocks in bindings clk: rockchip: Add clock controller for the RV1126B dt-bindings: clock, reset: Add support for rv1126b clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll() clk: qcom: x1e80100-dispcc: Add USB4 router link resets dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750 dt-bindings: clock: qcom: Add SM8750 video clock controller clk: qcom: branch: Extend invert logic for branch2 mem clocks ...