kernel/linux.git/drivers/remoteproc/Makefile, branch linux-4.16.y

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver

2017-08-30T23:07:41+00:00

Provide a basic driver to control Cortex M4 co-processor found on NXP i.MX7D and i.MX6SX. Currently it is able to resolve addresses between M4 and main CPU, start and stop the co-processor. Other functionality is not provided or test. This driver was tested on NXP i.MX7D and expected to work on i.MX6SX as well. Signed-off-by: Oleksij Rempel Signed-off-by: Bjorn Andersson

remoteproc/keystone: Add a remoteproc driver for Keystone 2 DSPs

2017-06-26T20:02:38+00:00

The Texas Instrument's Keystone 2 family of SoCs has 1 or more TMS320C66x DSP Core Subsystems (C66x CorePacs). Each subsystem has a C66x Fixed/Floating-Point DSP Core, with 32KB of L1P and L1D SRAMs, that can be configured and partitioned as either RAM and/or Cache, and 1 MB of L2 SRAM. The CorePac also includes an Internal DMA (IDMA), External Memory Controller (EMC), Extended Memory Controller (XMC) with a Memory Protection and Address Extension (MPAX) unit, a Bandwidth Management (BWM) unit, an Interrupt Controller (INTC) and a Powerdown Controller (PDC). A new remoteproc module is added to perform the device management of these DSP devices. The driver expects the firmware names to be of the form "keystone-dsp-fw", where X is the corresponding DSP number, and uses the standard remoteproc core ELF loader. The support is limited to images only using the DSP internal memories at the moment. This remoteproc driver is also designed to work with virtio, and uses the IPC Generation registers for performing the virtio signalling and getting notified of exceptions. The driver currently supports the 66AK2H/66AK2K, 66AK2L and 66AK2E SoCs. Signed-off-by: Suman Anna Signed-off-by: Sam Nelson Signed-off-by: Andrew F. Davis Acked-by: Santosh Shilimkar Signed-off-by: Bjorn Andersson

remoteproc: Move qcom_mdt_loader into drivers/soc/qcom

2017-02-06T16:57:25+00:00

With the remoteproc parts cleaned out of the MDT loader we can move it to drivers/soc/qcom. Acked-by: Andy Gross Signed-off-by: Bjorn Andersson

remoteproc: qcom: Extract non-mdt related helper

2017-02-06T16:57:24+00:00

In preparation for moving the mdt loader out of remoteproc let's move the somewhat unrelated resource table dummy helper to a Qualcomm "common" file. Signed-off-by: Bjorn Andersson

remoteproc/ste: Delete unused driver

2016-12-10T00:16:54+00:00

Back in July 2014 I asked around what was the intended target platform for the STE Modem remoteproc driver, so that I could add the proper hardware dependency to its config option. The answer I got was that there was no known publicly available hardware needing it and it was unlikely that there ever would. So I think it's time to delete this driver to lower the maintenance burden. Signed-off-by: Jean Delvare Cc: Linus Walleij Cc: Ohad Ben-Cohen Cc: Bjorn Andersson Cc: Suman Anna Acked-by: Linus Walleij Acked-by: Loic Pallardy Signed-off-by: Bjorn Andersson

Merge branch 'topic/st_fdma' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma into rproc-next

2016-11-17T06:19:47+00:00

remoteproc: Introduce Qualcomm ADSP PIL

2016-11-16T02:44:53+00:00

The Qualcomm ADSP Peripheral Image Loader is used on a variety of different Qualcomm platforms for loading firmware into and controlling the Hexagon based ADSP. Signed-off-by: Bjorn Andersson Signed-off-by: Bjorn Andersson

remoteproc: qcom_wcnss: Fix circular module dependency

2016-11-15T05:52:19+00:00

The tie between the main WCNSS driver and the IRIS driver causes a circular dependency between the two modules. Neither part makes sense to have on their own so lets merge them into one module. For the sake of picking up the clock and regulator resources described in the iris of_node we need an associated struct device. But, to keep the size of the patch down we continue to represent the IRIS part as its own platform_driver, within the same module, rather than setting up a dummy device. Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader") Reported-by: Andreas Färber Signed-off-by: Bjorn Andersson

remoteproc: Add a sysfs interface for firmware and state

2016-11-01T00:24:46+00:00

This patch adds a sysfs interface to rproc allowing the firmware name and processor state to be changed dynamically. State was previously available in debugfs, and is replicated here. The firmware file allows retrieval of the running firmware name, and a new one to be specified at run time, so long as the remote processor has been stopped. Signed-off-by: Matt Redfearn Signed-off-by: Bjorn Andersson