kernel/linux.git/drivers/regulator, branch v5.4.50

regualtor: pfuze100: correct sw1a/sw2 on pfuze3000

2020-06-30T19:36:54+00:00

[ Upstream commit 6f1cf5257acc6e6242ddf2f52bc7912aed77b79f ] PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG and pfuze100_sw_regulator_ops. Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a") Reported-by: Christophe Meynard Signed-off-by: Robin Gong Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l

2020-06-22T07:30:58+00:00

[ Upstream commit 906746ba26d0b45688f4c3b730c35f765dc958ba ] Fix typos in pm8150 l13/l16/l17 and pm8150l ldo8 supplies. Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Signed-off-by: Bjorn Andersson Tested-by: Vinod Koul Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20200415053708.717623-1-bjorn.andersson@linaro.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling

2020-03-12T12:00:29+00:00

commit 02fbabd5f4ed182d2c616e49309f5a3efd9ec671 upstream. There maybe an overshoot, when disabling, then re-enabling vrefbuf too quickly. VREFBUF is used by ADC/DAC on some boards. When re-enabling too quickly, an overshoot on the reference voltage make the conversions inaccurate for a short period of time. - Don't put the VREFBUF in HiZ when disabling, to force an active discharge. - Enforce a 1ms OFF/ON delay Fixes: 0cdbf481e927 ("regulator: Add support for stm32-vrefbuf") Signed-off-by: Fabrice Gasnier Message-Id: <1583312132-20932-1-git-send-email-fabrice.gasnier@st.com> Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

regulator: core: Fix exported symbols to the exported GPL version

2020-02-24T07:36:54+00:00

[ Upstream commit 3d7610e8da993539346dce6f7c909fd3d56bf4d5 ] Change the exported symbols introduced by commit e9153311491da ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") from EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL(), like is used for all the core parts. Fixes: e9153311491da ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") Reported-by: Dmitry Osipenko Signed-off-by: Enric Balletbo i Serra Link: https://lore.kernel.org/r/20200120123921.1204339-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage

2020-02-24T07:36:52+00:00

[ Upstream commit e9153311491da9d9863ead9888a1613531cb4a1b ] `cat /sys/kernel/debug/regulator/regulator_summary` ends on a deadlock when you have a voltage controlled regulator (vctrl). The problem is that the vctrl_get_voltage() and vctrl_set_voltage() calls the regulator_get_voltage() and regulator_set_voltage() and that will try to lock again the dependent regulators (the regulator supplying the control voltage). Fix the issue by exporting the unlocked version of the regulator_get_voltage() and regulator_set_voltage() API so drivers that need it, like the voltage controlled regulator driver can use it. Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") Reported-by: Douglas Anderson Signed-off-by: Enric Balletbo i Serra Link: https://lore.kernel.org/r/20200116094543.2847321-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: rk808: Lower log level on optional GPIOs being not available

2020-02-24T07:36:33+00:00

[ Upstream commit b8a039d37792067c1a380dc710361905724b9b2f ] RK808 can leverage a couple of GPIOs to tweak the ramp rate during DVS (Dynamic Voltage Scaling). These GPIOs are entirely optional but a dev_warn() appeared when cleaning this driver to use a more up-to-date gpiod API. At least reduce the log level to 'info' as it is totally fine to not populate these GPIO on a hardware design. This change is trivial but it is worth not polluting the logs during bringup phase by having real warnings and errors sorted out correctly. Fixes: a13eaf02e2d6 ("regulator: rk808: make better use of the gpiod API") Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20191203164709.11127-1-miquel.raynal@bootlin.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: core: Add regulator_is_equal() helper

2020-02-11T12:35:48+00:00

commit b059b7e0ec3208ff1e17cff6387d75a9fbab4e02 upstream. Add regulator_is_equal() helper to compare whether two regulators are the same. This is useful for checking whether two separate regulators in a driver are actually the same supply. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Igor Opaniuk Cc: Liam Girdwood Cc: Marcel Ziswiler Cc: Mark Brown Cc: Oleksandr Suvorov Link: https://lore.kernel.org/r/20191220164450.1395038-1-marex@denx.de Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

regulator: bd70528: Add MODULE_ALIAS to allow module auto loading

2020-01-26T09:01:05+00:00

[ Upstream commit 55d5f62c3fa005a6a8010363d7d1855909ceefbc ] The bd70528 regulator driver is probed by MFD driver. Add MODULE_ALIAS in order to allow udev to load the module when MFD sub-device cell for regulators is added. Fixes: 99ea37bd1e7d7 ("regulator: bd70528: Support ROHM BD70528 regulator block") Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/20191023121452.GA1812@localhost.localdomain Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: rn5t618: fix module aliases

2020-01-12T11:21:34+00:00

[ Upstream commit 62a1923cc8fe095912e6213ed5de27abbf1de77e ] platform device aliases were missing, preventing autoloading of module. Fixes: 811b700630ff ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators") Signed-off-by: Andreas Kemnade Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.info Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: core: fix regulator_register() error paths to properly release rdev

2020-01-12T11:21:15+00:00

[ Upstream commit a3cde9534ebdafe18a9bbab208df724c57e6c8e8 ] There are several issues with the error handling code of the regulator_register() function: ret = device_register(&rdev->dev); if (ret != 0) { put_device(&rdev->dev); --> rdev released goto unset_supplies; } ... unset_supplies: ... unset_regulator_supplies(rdev); --> use-after-free ... clean: if (dangling_of_gpiod) gpiod_put(config->ena_gpiod); kfree(rdev); --> double free We add a variable to record the failure of device_register() and move put_device() down a bit to avoid the above issues. Fixes: c438b9d01736 ("regulator: core: Move registration of regulator device") Signed-off-by: Wen Yang Cc: Liam Girdwood Cc: Mark Brown Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20191201030250.38074-1-wenyang@linux.alibaba.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin