kernel/linux.git/drivers/regulator, branch v4.19.77

regulator: Defer init completion for a while after late_initcall

2019-10-05T11:10:07+00:00

commit 55576cf1853798e86f620766e23b604c9224c19c upstream. The kernel has no way of knowing when we have finished instantiating drivers, between deferred probe and systems that build key drivers as modules we might be doing this long after userspace has booted. This has always been a bit of an issue with regulator_init_complete since it can power off hardware that's not had it's driver loaded which can result in user visible effects, the main case is powering off displays. Practically speaking it's not been an issue in real systems since most systems that use the regulator API are embedded and build in key drivers anyway but with Arm laptops coming on the market it's becoming more of an issue so let's do something about it. In the absence of any better idea just defer the powering off for 30s after late_initcall(), this is obviously a hack but it should mask the issue for now and it's no more arbitrary than late_initcall() itself. Ideally we'd have some heuristics to detect if we're on an affected system and tune or skip the delay appropriately, and there may be some need for a command line option to be added. Link: https://lore.kernel.org/r/20190904124250.25844-1-broonie@kernel.org Signed-off-by: Mark Brown Tested-by: Lee Jones Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg

2019-10-05T11:09:33+00:00

[ Upstream commit 1e2cc8c5e0745b545d4974788dc606d678b6e564 ] According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf Table 20. VPOS Bias Register Field Descriptions VPOS[5:0] Sets the Positive Display Bias (LDO) Voltage (50 mV per step) 000000: 4 V 000001: 4.05 V 000010: 4.1 V .................... 011101: 5.45 V 011110: 5.5 V (Default) 011111: 5.55 V .................... 100111: 5.95 V 101000: 6 V Note: Codes 101001 to 111111 map to 6 V The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage can match the datasheet. Fixes: 3a8d1a73a037 ("regulator: add LM363X driver") Signed-off-by: Axel Lin Link: https://lore.kernel.org/r/20190626132632.32629-1-axel.lin@ingics.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: s2mps11: Fix buck7 and buck8 wrong voltages

2019-07-26T07:14:22+00:00

commit 16da0eb5ab6ef2dd1d33431199126e63db9997cc upstream. On S2MPS11 device, the buck7 and buck8 regulator voltages start at 750 mV, not 600 mV. Using wrong minimal value caused shifting of these regulator values by 150 mV (e.g. buck7 usually configured to v1.35 V was reported as 1.2 V). On most of the boards these regulators are left in default state so this was only affecting reported voltage. However if any driver wanted to change them, then effectively it would set voltage 150 mV higher than intended. Cc: Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting

2019-04-05T20:33:15+00:00

[ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ] The act8600_sudcdc_voltage_ranges setting does not match the datasheet. The problems in below entry: REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000), 1. The off-by-one min_sel causes wrong volatage calculation. The min_sel should be 192. 2. According to the datasheet[1] Table 7. (on page 43): The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V. Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM. [1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf Fixes: df3a950e4e73 ("regulator: act8865: Add act8600 support") Signed-off-by: Axel Lin Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: s2mpa01: Fix step values for some LDOs

2019-03-23T19:09:58+00:00

commit 28c4f730d2a44f2591cb104091da29a38dac49fe upstream. The step values for some of the LDOs appears to be incorrect, resulting in incorrect voltages (or at least, ones which are different from the Samsung 3.4 vendor kernel). Signed-off-by: Stuart Menefy Reviewed-by: Krzysztof Kozlowski Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

regulator: max77620: Initialize values for DT properties

2019-03-23T19:09:58+00:00

commit 0ab66b3c326ef8f77dae9f528118966365757c0c upstream. If regulator DT node doesn't exist, its of_parse_cb callback function isn't called. Then all values for DT properties are filled with zero. This leads to wrong register update for FPS and POK settings. Signed-off-by: Jinyoung Park Signed-off-by: Mark Zhang Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

regulator: s2mps11: Fix steps for buck7, buck8 and LDO35

2019-03-23T19:09:57+00:00

commit 56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream. LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420 Arndale Octa board). Cc: Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

regulator: fix crash caused by null driver data

2018-09-20T16:04:51+00:00

dev_set_drvdata() needs to be called before device_register() exposes device to userspace. Otherwise kernel crashes after it gets null pointer from dev_get_drvdata() when userspace tries to access sysfs entries. [Removed backtrace for length -- broonie] Signed-off-by: Yu Zhao Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

regulator: Fix 'do-nothing' value for regulators without suspend state

2018-09-03T15:10:40+00:00

Some regulators don't have all states defined and in such cases regulator core should not assume anything. However in current implementation of of_get_regulation_constraints() DO_NOTHING_IN_SUSPEND enable value was set only for regulators which had suspend node defined, otherwise the default 0 value was used, what means DISABLE_IN_SUSPEND. This lead to broken system suspend/resume on boards, which had simple regulator constraints definition (without suspend state nodes). To avoid further mismatches between the default and uninitialized values of the suspend enabled/disabled states, change the values of the them, so default '0' means DO_NOTHING_IN_SUSPEND. Fixes: 72069f9957a1: regulator: leave one item to record whether regulator is enabled Signed-off-by: Marek Szyprowski Signed-off-by: Mark Brown Cc: stable@vger.kernel.org

regulator: bd71837: Disable voltage monitoring for LDO3/4

2018-08-29T14:07:18+00:00

There is a HW quirk in BD71837. The shutdown sequence timings for bucks/LDOs which are enabled via register interface are changed. At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the beginning of shut-down sequence. This causes LDO5/6 voltage monitoring to detect under voltage and force PMIC to emergency state instead of poweroff. Disable voltage monitoring for LDO5 and LDO6 at probe to avoid this. Signed-off-by: Matti Vaittinen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org