kernel/linux.git/drivers/pps/kapi.c, branch v6.19.11

Merge tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

2025-12-03T20:42:36+00:00

Pull printk updates from Petr Mladek: - Allow creaing nbcon console drivers with an unsafe write_atomic() callback that can only be called by the final nbcon_atomic_flush_unsafe(). Otherwise, the driver would rely on the kthread. It is going to be used as the-best-effort approach for an experimental nbcon netconsole driver, see https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org Note that a safe .write_atomic() callback is supposed to work in NMI context. But some networking drivers are not safe even in IRQ context: https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35 In an ideal world, all networking drivers would be fixed first and the atomic flush would be blocked only in NMI context. But it brings the question how reliable networking drivers are when the system is in a bad state. They might block flushing more reliable serial consoles which are more suitable for serious debugging anyway. - Allow to use the last 4 bytes of the printk ring buffer. - Prevent queuing IRQ work and block printk kthreads when consoles are suspended. Otherwise, they create non-necessary churn or even block the suspend. - Release console_lock() between each record in the kthread used for legacy consoles on RT. It might significantly speed up the boot. - Release nbcon context between each record in the atomic flush. It prevents stalls of the related printk kthread after it has lost the ownership in the middle of a record - Add support for NBCON consoles into KDB - Add %ptsP modifier for printing struct timespec64 and use it where possible - Misc code clean up * tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits) printk: Use console_is_usable on console_unblank arch: um: kmsg_dump: Use console_is_usable drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT lib/vsprintf: Unify FORMAT_STATE_NUM handlers printk: Avoid irq_work for printk_deferred() on suspend printk: Avoid scheduling irq_work on suspend printk: Allow printk_trigger_flush() to flush all types tracing: Switch to use %ptSp scsi: snic: Switch to use %ptSp scsi: fnic: Switch to use %ptSp s390/dasd: Switch to use %ptSp ptp: ocp: Switch to use %ptSp pps: Switch to use %ptSp PCI: epf-test: Switch to use %ptSp net: dsa: sja1105: Switch to use %ptSp mmc: mmc_test: Switch to use %ptSp media: av7110: Switch to use %ptSp ipmi: Switch to use %ptSp igb: Switch to use %ptSp e1000e: Switch to use %ptSp ...

pps: Switch to use %ptSp

2025-11-19T11:26:07+00:00

Use %ptSp instead of open coded variants to print content of struct timespec64 in human readable format. Acked-by: Rodolfo Giometti Signed-off-by: Andy Shevchenko Link: https://patch.msgid.link/20251113150217.3030010-17-andriy.shevchenko@linux.intel.com Signed-off-by: Petr Mladek

pps: fix warning in pps_register_cdev when register device fail

2025-09-06T14:00:40+00:00

Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error handling in __video_register_device()"), the release hook should be set before device_register(). Otherwise, when device_register() return error and put_device() try to callback the release function, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567 Modules linked in: CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567 Call Trace: kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0xe9/0x130 lib/kobject.c:737 put_device+0x24/0x30 drivers/base/core.c:3797 pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402 pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108 pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57 tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432 tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563 tiocsetd drivers/tty/tty_io.c:2429 [inline] tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl fs/ioctl.c:584 [inline] __x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e Before commit c79a39dc8d06 ("pps: Fix a use-after-free"), pps_register_cdev() call device_create() to create pps->dev, which will init dev->release to device_create_release(). Now the comment is outdated, just remove it. Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed in pps_register_source() to avoid a double free in the failure case. Link: https://lore.kernel.org/all/20250827065010.3208525-1-wangliang74@huawei.com/ Fixes: c79a39dc8d06 ("pps: Fix a use-after-free") Signed-off-by: Wang Liang Reviewed-By: Calvin Owens Link: https://lore.kernel.org/r/20250830075023.3498174-1-wangliang74@huawei.com Signed-off-by: Greg Kroah-Hartman

pps: Fix a use-after-free

2025-01-07T14:16:48+00:00

On a board running ntpd and gpsd, I'm seeing a consistent use-after-free in sys_exit() from gpsd when rebooting: pps pps1: removed ------------[ cut here ]------------ kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called. WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150 CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1 Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kobject_put+0x120/0x150 lr : kobject_put+0x120/0x150 sp : ffffffc0803d3ae0 x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001 x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440 x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600 x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20 x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: kobject_put+0x120/0x150 cdev_put+0x20/0x3c __fput+0x2c4/0x2d8 ____fput+0x1c/0x38 task_work_run+0x70/0xfc do_exit+0x2a0/0x924 do_group_exit+0x34/0x90 get_signal+0x7fc/0x8c0 do_signal+0x128/0x13b4 do_notify_resume+0xdc/0x160 el0_svc+0xd4/0xf8 el0t_64_sync_handler+0x140/0x14c el0t_64_sync+0x190/0x194 ---[ end trace 0000000000000000 ]--- ...followed by more symptoms of corruption, with similar stacks: refcount_t: underflow; use-after-free. kernel BUG at lib/list_debug.c:62! Kernel panic - not syncing: Oops - BUG: Fatal exception This happens because pps_device_destruct() frees the pps_device with the embedded cdev immediately after calling cdev_del(), but, as the comment above cdev_del() notes, fops for previously opened cdevs are still callable even after cdev_del() returns. I think this bug has always been there: I can't explain why it suddenly started happening every time I reboot this particular board. In commit d953e0e837e6 ("pps: Fix a use-after free bug when unregistering a source."), George Spelvin suggested removing the embedded cdev. That seems like the simplest way to fix this, so I've implemented his suggestion, using __register_chrdev() with pps_idr becoming the source of truth for which minor corresponds to which device. But now that pps_idr defines userspace visibility instead of cdev_add(), we need to be sure the pps->dev refcount can't reach zero while userspace can still find it again. So, the idr_remove() call moves to pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev. pps_core: source serial1 got cdev (251:1) <...> pps pps1: removed pps_core: unregistering pps1 pps_core: deallocating pps1 Fixes: d953e0e837e6 ("pps: Fix a use-after free bug when unregistering a source.") Cc: stable@vger.kernel.org Signed-off-by: Calvin Owens Reviewed-by: Michal Schmidt Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61

2019-05-24T15:36:45+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Michael Ellerman (powerpc) Reviewed-by: Richard Fontana Reviewed-by: Allison Randal Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman

pps: using ERR_PTR instead of NULL while pps_register_source fails

2018-11-27T09:05:36+00:00

pps_register_source() has keeps error codes in a local variable, but it does not make use of the code. This patch let it return the errcode in case of failure. Suggested-by: Richard Cochran Signed-off-by: YueHaibing Acked-by: Rodolfo Giometti Signed-off-by: Greg Kroah-Hartman

ntp/pps: use y2038 safe types in pps_event_time

2015-10-01T16:59:16+00:00

The pps_event_time uses two 'timespec' structures internally, which suffer from the y2038 problem. The uses of this structure are fairly self-contained in the pps code, so this replaces them all at once. Unfortunately, this includes the sfc ethernet driver aside from the pps subsystem, so we change that one as well. Both touch the same data structure, and there probably is no good way to split the patch into smaller units. Acked-by: Richard Cochran Acked-by: David S. Miller Reviewed-by: Thomas Gleixner Signed-off-by: Arnd Bergmann Signed-off-by: John Stultz

pps: convert to idr_alloc()

2013-02-28T03:10:18+00:00

Convert to the much saner new idr interface. Signed-off-by: Tejun Heo Cc: Rodolfo Giometti Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

pps: default echo function

2011-11-02T23:07:02+00:00

A default echo function has been provided so it is no longer an error when you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo function. This allows some code re-use and also makes it easier to write client drivers since the default echo function does not normally need to change. Signed-off-by: James Nuss Reviewed-by: Ben Gardiner Acked-by: Rodolfo Giometti Cc: Ricardo Martins Cc: Alexander Gordeev Cc: Igor Plyatov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

pps: initialize ts_real properly

2011-02-25T23:07:37+00:00

Initialize ts_real.flags to fix compiler warning about possible uninitialized use of this field. Signed-off-by: Alexander Gordeev Cc: john stultz Cc: Rodolfo Giometti Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds