Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v4.17.1 2018-04-06T04:21:08+00:00 2018-04-06T04:21:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-04-06T04:21:08+00:00 urn:sha1:167569343fac74ec6825a3ab982f795b5880e63e Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ... 2018-04-03T19:10:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-04-03T19:10:01+00:00 urn:sha1:3ac684b88148bf132fbf02a133cba9dcfb2e7aa2 Pull power supply and reset updates from Sebastian Reichel: - Microsemi Ocelot reset support - Spreadtrum SC27xx reset support - generic gpio charger: lot's of cleanups - axp20x fuel gauge: add AXP813 support - misc fixes, including one devicetree change for the Nokia N900, that has been Acked-by Tony Lindgren * tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (27 commits) power: reset: at91-reset: Switch from the pr_*() to the dev_*() logging functions power: reset: at91-poweroff: Remove redundant dev_err call in at91_poweroff_probe() power: reset: at91-poweroff: Switch from the pr_*() to the dev_*() logging functions power: reset: make function sc27xx_poweroff_shutdown static power: supply: da9150-fg: remove VLA usage ARM: dts: omap3-n900: Add link between battery and charger power: supply: bq2415x: add DT referencing support power: supply: bq27xxx: support missing supplier device max17042: propagate of_node to power supply device power: supply: axp288_fuel_gauge: Fix full status reporting power: supply: axp288_fuel_gauge: Do not register FG on ECS EF20EA power: reset: gpio-poweroff: Support for timeout from device property dt-bindings: power: reset: gpio-poweroff: Add 'timeout-ms' property power: reset: Add Spreadtrum SC27xx PMIC power off support power: supply: axp20x_battery: add support for AXP813 dt-bindings: power: supply: axp20x: add AXP813 battery DT binding power: supply: axp20x_battery: use data struct for variant specific code power: supply: gpio-charger: Remove pdata from gpio_charger power: supply: gpio-charger: Use GPIOF_ACTIVE_LOW for legacy setup power: supply: gpio-charger: Remove redundant dev_err call in probe function ... 2018-03-19T19:51:17+00:00 Ladislav Michl ladis@linux-mips.org 2018-03-16T10:06:26+00:00 urn:sha1:fd73a3e618889877d32e338622a363d04d9be709 Use dev_info() instead of pr_info(). Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 2018-03-19T19:50:51+00:00 Ladislav Michl ladis@linux-mips.org 2018-03-16T10:03:25+00:00 urn:sha1:ab08824826d72ef9c185b7aad4e9a1e98bf2fa51 There is an error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundancy. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 2018-03-19T19:50:24+00:00 Ladislav Michl ladis@linux-mips.org 2018-03-16T10:02:05+00:00 urn:sha1:062836db01f982683e3c5bb6cbf571ee7a13016a Use dev_info() instead of pr_info(). Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 2018-03-13T11:10:04+00:00 Colin Ian King colin.king@canonical.com 2018-03-13T10:54:06+00:00 urn:sha1:93619fdec96fa1cd19e5dffc5031cf4c63e6b431 The function sc27xx_poweroff_shutdown is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/power/reset/sc27xx-poweroff.c:28:6: warning: symbol 'sc27xx_poweroff_shutdown' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 2018-03-12T13:35:10+00:00 Sebastian Reichel sebastian.reichel@collabora.co.uk 2018-03-12T13:35:10+00:00 urn:sha1:75dd56c0cd68847809e6e75d6fcc234e6e6711d5 Merge for-stable fixes branch into for-next development branch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 2018-03-12T13:34:52+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2018-03-09T18:27:08+00:00 urn:sha1:fc5a7f0339d0641c0df14a9ed8af49c9992f9bef In preparation to enabling -Wvla, remove VLA usage and replace it with fixed-length arrays. DA9150_QIF_LONG_SIZE (4 bytes) is the biggest size of an attribute which can be accessed [1]. Fixed as part of the directive to remove all VLAs from the kernel: https://lkml.org/lkml/2018/3/7/621 [1] https://marc.info/?l=kernel-hardening&m=152059600524753&w=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 2018-03-12T13:34:51+00:00 Sebastian Reichel sebastian.reichel@collabora.co.uk 2018-02-21T11:42:20+00:00 urn:sha1:90ad4cc203c025788ccaf70dc1e57fbf43702c4d Add support for using bq2415x together with power_supply_am_i_supplied(). Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> 2018-03-12T13:30:09+00:00 Sebastian Reichel sebastian.reichel@collabora.co.uk 2018-02-15T20:28:40+00:00 urn:sha1:f72c14ad8c6631a0a42115e74164f9b5faf4c724 power_supply_am_i_supplied() can return negative error codes. In this case we should assume, that no charger is connected and the battery should be marked as DISCHARGING instead of NOT_CHARGING. Reported-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>