kernel/linux.git/drivers/power, branch v4.14.263

power: bq25890: Enable continuous conversion for ADC at charging

2022-01-27T08:00:58+00:00

[ Upstream commit 80211be1b9dec04cc2805d3d81e2091ecac289a1 ] Instead of one shot run of ADC at beginning of charging, run continuous conversion to ensure that all charging-related values are monitored properly (input voltage, input current, themperature etc.). Signed-off-by: Yauhen Kharuzhy Reviewed-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: reset: ltc2952: Fix use of floating point literals

2022-01-11T12:57:36+00:00

commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream. A new commit in LLVM causes an error on the use of 'long double' when '-mno-x87' is used, which the kernel does through an alias, '-mno-80387' (see the LLVM commit below for more details around why it does this). drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->trigger_delay = ktime_set(2, 500L*1E6L); ^ 3 errors generated. This happens due to the use of a 'long double' literal. The 'E6' part of '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes it to 'long double'. There is no visible reason for floating point values in this driver, as the values are only assigned to integer types. Use NSEC_PER_MSEC, which is the same integer value as '1E6L', to avoid changing functionality but fix the error. Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1497 Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

power: supply: bq27xxx: Fix kernel crash on IRQ handler register error

2021-11-26T10:40:34+00:00

[ Upstream commit cdf10ffe8f626d8a2edc354abf063df0078b2d71 ] When registering the IRQ handler fails, do not just return the error code, this will free the devm_kzalloc()-ed data struct while leaving the queued work queued and the registered power_supply registered with both of them now pointing to free-ed memory, resulting in various kernel crashes soon afterwards. Instead properly tear-down things on IRQ handler register errors. Fixes: 703df6c09795 ("power: bq27xxx_battery: Reorganize I2C into a module") Cc: Andrew F. Davis Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: supply: rt5033_battery: Change voltage values to µV

2021-11-26T10:40:33+00:00

[ Upstream commit bf895295e9a73411889816f1a0c1f4f1a2d9c678 ] Currently the rt5033_battery driver provides voltage values in mV. It should be µV as stated in Documentation/power/power_supply_class.rst. Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver") Cc: Beomho Seo Cc: Chanwoo Choi Signed-off-by: Jakob Hauser Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: supply: max17042_battery: use VFSOC for capacity when no rsns

2021-11-26T10:40:24+00:00

commit 223a3b82834f036a62aa831f67cbf1f1d644c6e2 upstream. On Galaxy S3 (i9300/i9305), which has the max17047 fuel gauge and no current sense resistor (rsns), the RepSOC register does not provide an accurate state of charge value. The reported value is wrong, and does not change over time. VFSOC however, which uses the voltage fuel gauge to determine the state of charge, always shows an accurate value. For devices without current sense, VFSOC is already used for the soc-alert (0x0003 is written to MiscCFG register), so with this change the source of the alert and the PROP_CAPACITY value match. Fixes: 359ab9f5b154 ("power_supply: Add MAX17042 Fuel Gauge Driver") Cc: Reviewed-by: Krzysztof Kozlowski Suggested-by: Wolfgang Wiedmeyer Signed-off-by: Henrik Grimler Reviewed-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

power: supply: max17042_battery: Prevent int underflow in set_soc_threshold

2021-11-26T10:40:24+00:00

commit e660dbb68c6b3f7b9eb8b9775846a44f9798b719 upstream. max17042_set_soc_threshold gets called with offset set to 1, which means that minimum threshold value would underflow once SOC got down to 0, causing invalid alerts from the gauge. Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC") Cc: Signed-off-by: Sebastian Krzyszkowiak Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

power: supply: max17042: handle fails of reading status register

2021-09-22T09:45:24+00:00

commit 54784ffa5b267f57161eb8fbb811499f22a0a0bf upstream. Reading status register can fail in the interrupt handler. In such case, the regmap_read() will not store anything useful under passed 'val' variable and random stack value will be used to determine type of interrupt. Handle the regmap_read() failure to avoid handling interrupt type and triggering changed power supply event based on random stack value. Fixes: 39e7213edc4f ("max17042_battery: Support regmap to access device's registers") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

power: supply: max17042_battery: fix typo in MAx17042_TOFF

2021-09-22T09:45:17+00:00

[ Upstream commit ed0d0a0506025f06061325cedae1bbebd081620a ] Signed-off-by: Sebastian Krzyszkowiak Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors

2021-09-22T09:45:17+00:00

[ Upstream commit caa534c3ba40c6e8352b42cbbbca9ba481814ac8 ] When fuel_gauge_reg_readb()/_writeb() fails, report which register we were trying to read / write when the error happened. Also reword the message a bit: - Drop the axp288 prefix, dev_err() already prints this - Switch from telegram / abbreviated style to a normal sentence, aligning the message with those from fuel_gauge_read_*bit_word() Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: supply: rt5033_battery: Fix device tree enumeration

2021-07-20T14:17:53+00:00

[ Upstream commit f3076cd8d1d5fa64b5e1fa5affc045c2fc123baa ] The fuel gauge in the RT5033 PMIC has its own I2C bus and interrupt line. Therefore, it is not actually part of the RT5033 MFD and needs its own of_match_table to probe properly. Also, given that it's independent of the MFD, there is actually no need to make the Kconfig depend on MFD_RT5033. Although the driver uses the shared header, there is no compile or runtime dependency on the RT5033 MFD driver. Cc: Beomho Seo Cc: Chanwoo Choi Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver") Signed-off-by: Stephan Gerhold Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin