kernel/linux.git/drivers/power/supply, branch v6.1.124

power: supply: gpio-charger: Fix set charge current limits

2025-01-02T09:30:55+00:00

commit afc6e39e824ad0e44b2af50a97885caec8d213d1 upstream. Fix set charge current limits for devices which allow to set the lowest charge current limit to be greater zero. If requested charge current limit is below lowest limit, the index equals current_limit_map_size which leads to accessing memory beyond allocated memory. Fixes: be2919d8355e ("power: supply: gpio-charger: add charge-current-limit feature") Cc: stable@vger.kernel.org Signed-off-by: Dimitri Fedrau Link: https://lore.kernel.org/r/20241209-fix-charge-current-limit-v1-1-760d9b8f2af3@liebherr.com Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

power: supply: bq27xxx: Fix registers of bq27426

2024-12-14T18:53:49+00:00

[ Upstream commit 34f99d3b706a519e556841f405c224ca708b1f54 ] Correct bq27426 registers, according to technical reference manual it does not have Design Capacity register so it is not register compatible with bq27421. Fixes: 5ef6a16033b47 ("power: supply: bq27xxx: Add support for BQ27426") Signed-off-by: Barnabás Czémán Link: https://lore.kernel.org/r/20241016-fix_bq27426-v2-1-aa6c0f51a9f6@mainlining.org Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: supply: core: Remove might_sleep() from power_supply_put()

2024-12-14T18:53:49+00:00

[ Upstream commit f6da4553ff24a5d1c959c9627c965323adc3d307 ] The put_device() call in power_supply_put() may call power_supply_dev_release(). The latter function does not sleep so power_supply_put() doesn't sleep either. Hence, remove the might_sleep() call from power_supply_put(). This patch suppresses false positive complaints about calling a sleeping function from atomic context if power_supply_put() is called from atomic context. Cc: Kyle Tso Cc: Krzysztof Kozlowski Fixes: 1a352462b537 ("power_supply: Add power_supply_put for decrementing device reference counter") Signed-off-by: Bart Van Assche Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240917193914.47566-1-bvanassche@acm.org Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: supply: hwmon: Fix missing temp1_max_alarm attribute

2024-10-17T13:21:51+00:00

commit e50a57d16f897e45de1112eb6478577b197fab52 upstream. Temp channel 0 aka temp1 can have a temp1_max_alarm attribute for power_supply devices which have a POWER_SUPPLY_PROP_TEMP_ALERT_MAX property. HWMON_T_MAX_ALARM was missing from power_supply_hwmon_info for temp channel 0, causing the hwmon temp1_max_alarm attribute to be missing from such power_supply devices. Add this to power_supply_hwmon_info to fix this. Fixes: f1d33ae806ec ("power: supply: remove duplicated argument in power_supply_hwmon_info") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240908185337.103696-2-hdegoede@redhat.com Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

power: supply: max17042_battery: Fix SOC threshold calc w/ no current sense

2024-10-17T13:20:49+00:00

[ Upstream commit 3a3acf839b2cedf092bdd1ff65b0e9895df1656b ] Commit 223a3b82834f ("power: supply: max17042_battery: use VFSOC for capacity when no rsns") made it so that capacity on systems without current sensing would be read from VFSOC instead of RepSOC. However, the SOC threshold calculation still read RepSOC to get the SOC regardless of the current sensing option state. Fix this by applying the same conditional to determine which register should be read. This also seems to be the intended behavior as per the datasheet - SOC alert config value in MiscCFG on setups without current sensing is set to a value of 0b11, indicating SOC alerts being generated based on VFSOC, instead of 0b00 which indicates SOC alerts being generated based on RepSOC. This fixes an issue on the Galaxy S3/Midas boards, where the alert interrupt would be constantly retriggered, causing high CPU usage on idle (around ~12%-15%). Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC") Signed-off-by: Artur Weber Reviewed-by: Henrik Grimler Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240817-max17042-soc-threshold-fix-v1-1-72b45899c3cc@gmail.com Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: supply: axp20x_battery: Remove design from min and max voltage

2024-10-17T13:20:48+00:00

[ Upstream commit 61978807b00f8a1817b0e5580981af1cd2f428a5 ] The POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN and POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN values should be immutable properties of the battery, but for this driver they are writable values and used as the minimum and maximum values for charging. Remove the DESIGN designation from these values. Fixes: 46c202b5f25f ("power: supply: add battery driver for AXP20X and AXP22X PMICs") Suggested-by: Chen-Yu Tsai Signed-off-by: Chris Morgan Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240821215456.962564-3-macroalpha82@gmail.com Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: supply: axp288_charger: Round constant_charge_voltage writes down

2024-08-14T11:52:59+00:00

commit 81af7f2342d162e24ac820c10e68684d9f927663 upstream. Round constant_charge_voltage writes down to the first supported lower value, rather then rounding them up to the first supported higher value. This fixes e.g. writing 4250000 resulting in a value of 4350000 which might be dangerous, instead writing 4250000 will now result in a safe 4200000 value. Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240717200333.56669-2-hdegoede@redhat.com Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

power: supply: axp288_charger: Fix constant_charge_voltage writes

2024-08-14T11:52:58+00:00

commit b34ce4a59cfe9cd0d6f870e6408e8ec88a964585 upstream. info->max_cv is in millivolts, divide the microvolt value being written to constant_charge_voltage by 1000 *before* clamping it to info->max_cv. Before this fix the code always tried to set constant_charge_voltage to max_cv / 1000 = 4 millivolt, which ends up in setting it to 4.1V which is the lowest supported value. Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240717200333.56669-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman

power: supply: cros_usbpd: provide ID table for avoiding fallback match

2024-06-27T11:46:17+00:00

[ Upstream commit 0f8678c34cbfdc63569a9b0ede1fe235ec6ec693 ] Instead of using fallback driver name match, provide ID table[1] for the primary match. [1]: https://elixir.bootlin.com/linux/v6.8/source/drivers/base/platform.c#L1353 Reviewed-by: Benson Leung Reviewed-by: Prashant Malani Reviewed-by: Krzysztof Kozlowski Signed-off-by: Tzung-Bi Shih Link: https://lore.kernel.org/r/20240401030052.2887845-4-tzungbi@kernel.org Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator

2024-05-17T09:55:55+00:00

[ Upstream commit 1e0fb113646182e073539db96016b00cfeb18ecc ] The of_match shall correspond to the name of the regulator subnode, or the deprecated `regulator-compatible` property must be used: failing to do so, the regulator won't probe (and the driver will as well not probe). Since the devicetree binding for this driver is actually correct and wants DTs to use the "usb-otg-vbus-regulator" subnode name, fix this driver by aligning the `of_match` string to what the DT binding wants. Fixes: 0402e8ebb8b8 ("power: supply: mt6360_charger: add MT6360 charger support") Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20240410084405.1389378-1-angelogioacchino.delregno@collabora.com Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin