kernel/linux.git/drivers/power/supply/Makefile, branch v6.6.134

Merge tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2023-07-04T00:23:16+00:00

Pull power supply and reset updates from Sebastian Reichel: - Add new Qualcomm PMI8998/PM660 SMB2 charger - bq256xx: support systems without thermistors - cros_pchg: fix peripheral device status after system resume - axp20x_usb_power: add support for AXP192 - qcom-pon: add support for pm8941 - at91-reset: prepare to expose reset reason to sysfs - switch all I2C drivers back to use .probe instead of .probe_new - convert some more DT bindings to YAML - misc cleanups * tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml power: reset: at91-reset: change the power on reason prototype power: reset: qcom-pon: add support for pm8941-pon dt-bindings: power: reset: qcom-pon: define pm8941-pon power: supply: add Qualcomm PMI8998 SMB2 Charger driver dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver power: supply: rt9467: Make charger-enable control as logic level power: supply: Switch i2c drivers back to use .probe() power: reset: add HAS_IOPORT dependencies dt-bindings: power: supply: axp20x: Add AXP192 compatible power: supply: axp20x_usb_power: Add support for AXP192 power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check power: supply: axp20x_usb_power: Use regmap field for VBUS disabling power: supply: axp20x_usb_power: Use regmap fields for USB BC feature power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature power: supply: axp20x_usb_power: Simplify USB current limit handling power: supply: hwmon: constify pointers to hwmon_channel_info power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed() ...

power: supply: add Qualcomm PMI8998 SMB2 Charger driver

2023-06-08T23:20:14+00:00

Add a driver for the SMB2 charger block found in the Qualcomm PMI8998 and PM660. This driver is capable of utilising Qualcomm's Automatic Power Source Detection (APSD) BC1.2 implementation, as well as Automatic Input Current Limiting (AICL) to configure the maximum input current limit of DCP (wall) chargers. Quick Charge is not currently supported. Most devices using the smb2 charger have a secondary dedicated charger chip which is used in parallel to enable faster charger without overheating. However, not all do, as a result to ensure safety until these are supported, the maximum current is limited to ~1A via the FAST_CHARGE_CURRENT_CFG register. Signed-off-by: Caleb Connolly Tested-by: Joel Selvaraj Signed-off-by: Sebastian Reichel

power: supply: rt5033_charger: Add RT5033 charger device driver

2023-06-08T17:17:14+00:00

This patch adds device driver of Richtek RT5033 PMIC. The driver supports switching charger. rt5033 charger provides three charging modes. The charging modes are pre-charge mode, fast charge mode and constant voltage mode. They vary in charge rate, the charge parameters can be controlled by i2c interface. Tested-by: Raymond Hackley Signed-off-by: Jakob Hauser Reviewed-by: Linus Walleij Acked-by: Sebastian Reichel Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/9556d4ebb30fd321e37aa0eb343554122e4720c9.1684182964.git.jahau@rocketmail.com

Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-02-27T18:04:49+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...

Merge tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2023-02-25T01:04:23+00:00

Pull power supply and reset updates from Sebastian Reichel: "Nothing special for the power-supply subystem this time. - power-supply core: remove faulty cooling logic - convert all sysfs show() handlers from *printf() use sysfs_emit() - bq25890: add dual-charger support required by Lenovo Yoga Tab 3 Pro - bq27xxx: fix reporting critical level - syscon-reboot: add priority property support - new rt9467 charger driver - new rt9471 charger driver - new Odroid Go Ultra poweroff driver - misc minor fixes and cleanups" * tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: reset: odroid-go-ultra: fix I2C dependency power: supply: leds: explicitly include linux/leds.h dt-bindings: power: supply: pm8941-coincell: Don't require charging properties dt-bindings: power: supply: pm8941-coincell: Add PM8998 compatible power: reset: add Odroid Go Ultra poweroff driver power: supply: rt9467: Fix spelling mistake "attache" -> "attach" power: supply: rt9471: fix using wrong ce_gpio in rt9471_probe() power: supply: max77650: Make max77650_charger_disable() return void Documentation: power: rt9467: Document exported sysfs entries power: supply: rt9467: Add Richtek RT9467 charger driver dt-bindings: power: supply: Add Richtek RT9467 battery charger Documentation: power: rt9471: Document exported sysfs entries power: supply: rt9471: Add Richtek RT9471 charger driver dt-bindings: power: supply: Add Richtek RT9471 battery charger power: supply: max1721x: Use strscpy() is more robust and safer power: supply: test-power: use strscpy() instead of strncpy() power: supply: bq27xxx: fix reporting critical level power: supply: bq256xx: Init ichg/vbat value with chip default value power: supply: collie_battery: Convert to GPIO descriptors (part 2) power: supply: remove faulty cooling logic ...

power: supply: Introduce Qualcomm PMIC GLINK power supply

2023-02-13T21:45:37+00:00

The PMIC GLINK service, running on a coprocessor of modern Qualcomm platforms, deals with battery charging and fuel gauging, as well as reporting status of AC and wireless power supplies. As this is just one of the functionalities provided by the PMIC GLINK service, this power supply driver is implemented as an auxilirary bus driver, spawned by the main "pmic glink" driver when the PMIC GLINK service is detected. Signed-off-by: Bjorn Andersson Tested-by: Konrad Dybcio # SM8350 PDX215 Reviewed-by: Neil Armstrong Tested-by: Neil Armstrong # on SM8550-MTP & SM8450-HDK Signed-off-by: Bjorn Andersson Acked-by: Sebastian Reichel Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230207144241.1767973-1-quic_bjorande@quicinc.com

power: supply: rt9467: Add Richtek RT9467 charger driver

2023-02-03T16:08:28+00:00

RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for portable applications. It integrates a synchronous PWM controller, power MOSFETs, input current sensing and regulation, high-accuracy voltage regulation, and charge termination. The charge current is regulated through integrated sensing resistors. The RT9467 also features USB On-The-Go (OTG) support. It also integrates D+/D- pin for USB host/charging port detection. Co-developed-by: ChiYuan Huang Signed-off-by: ChiYuan Huang Signed-off-by: ChiaEn Wu Signed-off-by: Sebastian Reichel

power: supply: rt9471: Add Richtek RT9471 charger driver

2023-02-03T13:35:18+00:00

Add support for the RT9471 3A 1-Cell Li+ battery charger. The RT9471 is a highly-integrated 3A switch mode battery charger with low impedance power path to better optimize the charging efficiency. Co-developed-by: Alina Yu Signed-off-by: Alina Yu Signed-off-by: ChiYuan Huang Signed-off-by: Sebastian Reichel

power: remove pda_power supply driver

2023-02-01T16:23:38+00:00

This driver was used for a couple of Intel PXA and Samsung S3C24xx based PDAs, but all of those are now removed from the kernel, so the driver itself is no longer useful. Cc: Anton Vorontsov Cc: linux-pm@vger.kernel.org Acked-by: Sebastian Reichel Acked-by: Robert Jarzmik Signed-off-by: Arnd Bergmann

power: remove tosa_battery driver

2023-01-20T10:24:17+00:00

The PXA tosa machine is removed, so this driver is no longer in use. Cc: linux-pm@vger.kernel.org Acked-by: Sebastian Reichel Acked-by: Robert Jarzmik Signed-off-by: Arnd Bergmann