kernel/linux.git/drivers/power/supply/Makefile, branch v5.10.257

power: supply: bq25980: Add support for the BQ259xx family

2020-10-03T23:54:35+00:00

Add support for the BQ25980, BQ25975 and BQ25960 family of flash chargers. Signed-off-by: Dan Murphy Signed-off-by: Sebastian Reichel

power: supply: Add support for RN5T618/RC5T619 charger and fuel gauge

2020-08-28T15:34:38+00:00

Both chips have charger and a fuel gauge. This adds basic support for displaying the state of the battery and the input power, settings are not modified. There are some defaults set via OTP. Charging also starts after plugging USB. Known issues of the fuel gauge: There are drivers in the wild which disable the fuel gauge at shutdown. If a kernel is booted without fuel gauge support, after such a driver has been used, the fuel gauge will stay off and decalibrate. If this driver is used after that, it might display wrong values for charge level. Signed-off-by: Andreas Kemnade Signed-off-by: Sebastian Reichel

power: supply: bq25150 introduce the bq25150

2020-07-21T20:45:59+00:00

Introduce the bq2515x family of chargers. The BQ2515X family of devices are highly integrated battery management ICs that integrate the most common functions for wearable devices namely a charger, an output voltage rail, ADC for battery and system monitoring, and a push-button controller. Datasheets: bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf Signed-off-by: Ricardo Rivera-Matos Signed-off-by: Sebastian Reichel

Merge tag 'tags/ib-mfd-iio-power-v5.8' into psy-next

2020-05-28T07:04:26+00:00

This merges the MP2629 battery charge management immutable branch between MFD, IIO and power-supply due for the v5.8 merge window into power-supply for-next branch. Signed-off-by: Sebastian Reichel

power: supply: Add support for mps mp2629 battery charger

2020-05-26T09:41:52+00:00

The mp2629 provides switching-mode battery charge management for single-cell Li-ion or Li-polymer battery. Driver supports the access/control input source and battery charging parameters. Signed-off-by: Saravanan Sekar Reviewed-by: Andy Shevchenko Reviewed-by: Sebastian Reichel Signed-off-by: Lee Jones

power: supply: Support ROHM bd99954 charger

2020-05-10T00:35:49+00:00

The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion secondary battery intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. BD99954 provides a Dual-source Battery Charger, two port BC1.2 detection and a Battery Monitor. Support ROHM BD99954 Charger IC. Signed-off-by: Matti Vaittinen Reviewed-by: Andy Shevchenko Signed-off-by: Sebastian Reichel

power: supply: add CellWise cw2015 fuel gauge driver

2020-05-03T15:40:39+00:00

This patch adds a driver for the CellWise cw2015 fuel gauge. The CellWise cw2015 is a shuntless, single-cell Li-Ion fuel gauge used in the pine64 Pinebook Pro laptop and some Raspberry Pi UPS HATs. Signed-off-by: Tobias Schramm Reviewed-by: Andy Shevchenko Signed-off-by: Sebastian Reichel

power/supply: Drop obsolete JZ4740 driver

2019-07-30T17:41:54+00:00

It has been replaced with the more mature ingenic-battery driver. Signed-off-by: Paul Cercueil Tested-by: Artur Rojek Acked-by: Sebastian Reichel Signed-off-by: Paul Burton

Merge tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2019-07-16T04:06:15+00:00

Pull power supply and reset updates from Sebastian Reichel: "Core: - add HWMON compat layer - new properties: - input power limit - input voltage limit Drivers: - qcom-pon: add gen2 support - new driver for storing reboot move in NVMEM - new driver for Wilco EC charger configuration - simplify getting the adapter of a client" * tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: nvmem-reboot-mode: add CONFIG_OF dependency power_supply: wilco_ec: Add charging config driver power: supply: cros: allow to set input voltage and current limit power: supply: add input power and voltage limit properties power: supply: fix semicolon.cocci warnings power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface dt-bindings: power: reset: add document for NVMEM based reboot-mode reset: qcom-pon: Add support for gen2 pon dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line power: supply: Add HWMON compatibility layer power: supply: sbs-manager: simplify getting the adapter of a client power: supply: rt9455_charger: simplify getting the adapter of a client power: supply: rt5033_battery: simplify getting the adapter of a client power: supply: max17042_battery: simplify getting the adapter of a client power: supply: max17040_battery: simplify getting the adapter of a client power: supply: max14656_charger_detector: simplify getting the adapter of a client power: supply: bq25890_charger: simplify getting the adapter of a client power: supply: bq24257_charger: simplify getting the adapter of a client power: supply: bq24190_charger: simplify getting the adapter of a client

power_supply: wilco_ec: Add charging config driver

2019-07-04T22:54:36+00:00

Add a driver to control the charging algorithm used on Wilco devices. See Documentation/ABI/testing/sysfs-class-power-wilco for the userspace interface and other info. Signed-off-by: Nick Crews Reviewed-by: Enric Balletbo i Serra Signed-off-by: Sebastian Reichel