kernel/linux.git/drivers/power/supply/Makefile, branch linux-5.9.y

power: supply: bq25150 introduce the bq25150

2020-07-21T20:45:59+00:00

Introduce the bq2515x family of chargers. The BQ2515X family of devices are highly integrated battery management ICs that integrate the most common functions for wearable devices namely a charger, an output voltage rail, ADC for battery and system monitoring, and a push-button controller. Datasheets: bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf Signed-off-by: Ricardo Rivera-Matos Signed-off-by: Sebastian Reichel

Merge tag 'tags/ib-mfd-iio-power-v5.8' into psy-next

2020-05-28T07:04:26+00:00

This merges the MP2629 battery charge management immutable branch between MFD, IIO and power-supply due for the v5.8 merge window into power-supply for-next branch. Signed-off-by: Sebastian Reichel

power: supply: Add support for mps mp2629 battery charger

2020-05-26T09:41:52+00:00

The mp2629 provides switching-mode battery charge management for single-cell Li-ion or Li-polymer battery. Driver supports the access/control input source and battery charging parameters. Signed-off-by: Saravanan Sekar Reviewed-by: Andy Shevchenko Reviewed-by: Sebastian Reichel Signed-off-by: Lee Jones

power: supply: Support ROHM bd99954 charger

2020-05-10T00:35:49+00:00

The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion secondary battery intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. BD99954 provides a Dual-source Battery Charger, two port BC1.2 detection and a Battery Monitor. Support ROHM BD99954 Charger IC. Signed-off-by: Matti Vaittinen Reviewed-by: Andy Shevchenko Signed-off-by: Sebastian Reichel

power: supply: add CellWise cw2015 fuel gauge driver

2020-05-03T15:40:39+00:00

This patch adds a driver for the CellWise cw2015 fuel gauge. The CellWise cw2015 is a shuntless, single-cell Li-Ion fuel gauge used in the pine64 Pinebook Pro laptop and some Raspberry Pi UPS HATs. Signed-off-by: Tobias Schramm Reviewed-by: Andy Shevchenko Signed-off-by: Sebastian Reichel

power/supply: Drop obsolete JZ4740 driver

2019-07-30T17:41:54+00:00

It has been replaced with the more mature ingenic-battery driver. Signed-off-by: Paul Cercueil Tested-by: Artur Rojek Acked-by: Sebastian Reichel Signed-off-by: Paul Burton

Merge tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2019-07-16T04:06:15+00:00

Pull power supply and reset updates from Sebastian Reichel: "Core: - add HWMON compat layer - new properties: - input power limit - input voltage limit Drivers: - qcom-pon: add gen2 support - new driver for storing reboot move in NVMEM - new driver for Wilco EC charger configuration - simplify getting the adapter of a client" * tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: nvmem-reboot-mode: add CONFIG_OF dependency power_supply: wilco_ec: Add charging config driver power: supply: cros: allow to set input voltage and current limit power: supply: add input power and voltage limit properties power: supply: fix semicolon.cocci warnings power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface dt-bindings: power: reset: add document for NVMEM based reboot-mode reset: qcom-pon: Add support for gen2 pon dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line power: supply: Add HWMON compatibility layer power: supply: sbs-manager: simplify getting the adapter of a client power: supply: rt9455_charger: simplify getting the adapter of a client power: supply: rt5033_battery: simplify getting the adapter of a client power: supply: max17042_battery: simplify getting the adapter of a client power: supply: max17040_battery: simplify getting the adapter of a client power: supply: max14656_charger_detector: simplify getting the adapter of a client power: supply: bq25890_charger: simplify getting the adapter of a client power: supply: bq24257_charger: simplify getting the adapter of a client power: supply: bq24190_charger: simplify getting the adapter of a client

power_supply: wilco_ec: Add charging config driver

2019-07-04T22:54:36+00:00

Add a driver to control the charging algorithm used on Wilco devices. See Documentation/ABI/testing/sysfs-class-power-wilco for the userspace interface and other info. Signed-off-by: Nick Crews Reviewed-by: Enric Balletbo i Serra Signed-off-by: Sebastian Reichel

power: supply: Initial support for ROHM BD70528 PMIC charger block

2019-06-27T09:57:24+00:00

ROHM BD70528 PMIC includes battery charger block. Support charger staus queries and doing few basic settings like input current limit and charging current. Signed-off-by: Matti Vaittinen Acked-by: Sebastian Reichel Signed-off-by: Lee Jones

power: supply: Add HWMON compatibility layer

2019-06-23T17:47:48+00:00

Add code implementing HWMON adapter/compatibility layer to allow expositing various sensors present on power supply devices via HWMON subsystem. This is done in order to allow userspace to use single ABI/library(libsensors) to access/manipulate all of the sensors of the system. Signed-off-by: Andrey Smirnov Reviewed-by: Guenter Roeck Tested-by: Chris Healy Cc: Chris Healy Cc: Cory Tusar Cc: Lucas Stach Cc: Fabio Estevam Cc: Guenter Roeck Cc: Sebastian Reichel Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Reichel