kernel/linux.git/drivers/power/reset, branch linux-5.11.y

power: reset: at91-sama5d2_shdwc: fix wkupdbc mask

2021-03-04T11:14:38+00:00

[ Upstream commit 95aa21a3f1183260db1b0395e03df5bebc5ed641 ] According to datasheet WKUPDBC mask is b/w bits 26..24. Fixes: f80cb48843987 ("power: reset: at91-shdwc: add new shutdown controller driver") Signed-off-by: Claudiu Beznea Reviewed-by: Alexandre Belloni Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

power: reset: new driver regulator-poweroff

2020-12-12T23:14:15+00:00

This driver registers a pm_power_off function to turn off the board by force-disabling a devicetree-defined regulator. Signed-off-by: Michael Klein Signed-off-by: Sebastian Reichel

power: reset: Use printk format symbol resolver

2020-11-30T01:10:18+00:00

Instead of looking up a symbol name by hand, use the %ps printk format specifier. Signed-off-by: Helge Deller Signed-off-by: Sebastian Reichel

power: reset: ocelot: Add support 2 other MIPS based SoCs

2020-11-29T21:34:07+00:00

This adds reset support for Luton and Jaguar2 in the ocelot-reset driver. They are both MIPS based belonging to the Vcore III family. Acked-by: Alexandre Belloni Signed-off-by: Gregory CLEMENT Signed-off-by: Sebastian Reichel

power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5

2020-10-15T19:37:59+00:00

To add support for Sparx5, the dependency on MSCC_OCELOT was removed. However, this increases exposure of the driver question not only to Sparx5 platforms, but to everyone. Hence re-add the dependency on MSCC_OCELOT, and extend it with ARCH_SPARX5, to prevent asking the user about this driver when configuring a kernel without Ocelot and Sparx5 support. Fixes: ec871696b7776767 ("power: reset: ocelot: Add support for Sparx5") Signed-off-by: Geert Uytterhoeven Signed-off-by: Sebastian Reichel

power: reset: ocelot: Add support for Sparx5

2020-10-08T21:24:04+00:00

This adds reset support for Sparx5 in the ocelot-reset driver. Signed-off-by: Lars Povlsen Signed-off-by: Sebastian Reichel

power: reset: add driver for LinkStation power off

2020-07-27T23:49:32+00:00

Some Buffalo LinkStations perform the power off operation, at restart time, depending on the state of an output pin (LED2/INTn) at the ethernet PHY. This pin is also used to wake the machine when a WoL packet is received by the PHY. The driver is required by the Buffalo LinkStation LS421DE (ARM MVEBU), and other models. Without it, the board remains forever halted if a power off command is executed, unless the PSU is disconnected and connected again. Add the driver to provide the power off function and also make the WoL feature to be available. Signed-off-by: Daniel González Cabanelas Signed-off-by: Sebastian Reichel

power: reset: keystone-reset: Replace HTTP links with HTTPS ones

2020-07-26T21:46:16+00:00

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Sebastian Reichel

Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2020-06-10T18:28:35+00:00

Pull power supply and reset updates from Sebastian Reichel: "This time there are lots of changes. Quite a few changes to the core, lots of driver changes and one change to kobject core (with Ack from Greg). Summary: kobject: - Increase number of allowed uevent variables power-supply core: - Add power-supply type in uevent - Cleanup property handling in core - Make property and usb_type pointers const - Convert core power-supply DT binding to YAML - Cleanup HWMON code - Add new health status "calibration required" - Add new properties for manufacture date and capacity error margin battery drivers: - new cw2015 battery driver used by pine64 Pinebook Pro laptop - axp22: blacklist on Meegopad T02 - sc27xx: support current/voltage reading - max17042: support time-to-empty reading - simple-battery: add more battery parameters - bq27xxx: convert DT binding document to YAML - sbs-battery: add TI BQ20Z65 support, fix technology property, convert DT binding to YAML, add option to disable charger broadcasts, add new properties: manufacture date, capacity error margin, average current, charge current and voltage and support calibration required health status - misc fixes charger drivers: - bq25890: cleanup, implement charge type, precharge current and input current limiting properties - bd70528: use new linear range helper library - bd99954: new charger driver - mp2629: new charger driver - misc fixes reboot drivers: - oxnas-restart: introduce new driver - syscon-reboot: convert DT binding to YAML, add parent syscon device support - misc fixes" * tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits) power: supply: cw2015: Attach OF ID table to the driver power: reset: gpio-poweroff: add missing '\n' in dev_err() Revert "power: supply: sbs-battery: simplify read_read_string_data" Revert "power: supply: sbs-battery: add PEC support" dt-bindings: power: sbs-battery: Convert to yaml power: supply: sbs-battery: constify power-supply property array power: supply: sbs-battery: switch to i2c's probe_new power: supply: sbs-battery: switch from of_property_* to device_property_* power: supply: sbs-battery: add ability to disable charger broadcasts power: supply: sbs-battery: fix idle battery status power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support power: supply: sbs-battery: add MANUFACTURE_DATE support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support power: supply: sbs-battery: add PEC support power: supply: sbs-battery: simplify read_read_string_data power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support power: supply: sbs-battery: Add TI BQ20Z65 support power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED ...

power: reset: gpio-poweroff: add missing '\n' in dev_err()

2020-06-05T23:13:26+00:00

dev_err() needs a terminating newline. Signed-off-by: Luca Ceresoli Signed-off-by: Sebastian Reichel