kernel/linux.git/drivers/pnp, branch linux-4.20.y

Merge tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-06-07T19:34:37+00:00

Pull media updates from Mauro Carvalho Chehab: - remove of atomisp driver from staging, as nobody would have time to dedicate huge efforts to fix all the problems there. Also, we have a feeling that the driver may not even run the way it is. - move Zoran driver to staging, in order to be either fixed to use VB2 and the proper media kAPIs or to be removed - remove videobuf-dvb driver, with is unused for a while - some V4L2 documentation fixes/improvements - new sensor drivers: imx258 and ov7251 - a new driver was added to allow using I2C transparent drivers - several improvements at the ddbridge driver - several improvements at the ISDB pt1 driver, making it more coherent with the DVB framework - added a new platform driver for MIPI CSI-2 RX: cadence - now, all media drivers can be compiled on x86 with COMPILE_TEST - almost all media drivers now build on non-x86 architectures with COMPILE_TEST - lots of other random stuff: cleanups, support for new board models, bug fixes, etc * tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) media: omap2: fix compile-testing with FB_OMAP2=m media: media/radio/Kconfig: add back RADIO_ISA media: v4l2-ioctl.c: fix missing unlock in __video_do_ioctl() media: pxa_camera: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power media: arch: sh: migor: Fix TW9910 PDN gpio media: staging: tegra-vde: Reset VDE regardless of memory client resetting failure media: marvel-ccic: mmp: select VIDEOBUF2_VMALLOC/DMA_CONTIG media: marvel-ccic: allow ccic and mmp drivers to coexist media: uvcvideo: Prevent setting unavailable flags media: ddbridge: conditionally enable fast TS for stv0910-equipped bridges media: dvb-frontends/stv0910: make TS speed configurable media: ddbridge/mci: add identifiers to function definition arguments media: ddbridge/mci: protect against out-of-bounds array access in stop() media: rc: ensure input/lirc device can be opened after register media: rc: nuvoton: Keep device enabled during reg init media: rc: nuvoton: Keep track of users on CIR enable/disable media: rc: nuvoton: Tweak the interrupt enabling dance media: uvcvideo: Support realtek's UVC 1.5 device media: uvcvideo: Fix driver reference counting media: gspca_zc3xx: Enable short exposure times for OV7648 ...

proc: introduce proc_create_single{,_data}

2018-05-16T05:23:35+00:00

Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig

media: sound, isapnp: allow building more drivers with COMPILE_TEST

2018-04-20T14:53:45+00:00

Drivers that depend on ISAPNP currently can't be built with COMPILE_TEST. However, looking at isapnp.h, there are already stubs there to allow drivers to include it even when isa PNP is not supported. So, remove such dependencies when COMPILE_TEST. Acked-by: Takashi Iwai Signed-off-by: Mauro Carvalho Chehab

PNP: pnpbios: Use PTR_ERR_OR_ZERO()

2017-12-16T01:59:45+00:00

Fix ptr_ret.cocci warnings: drivers/pnp/pnpbios/core.c:584:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vasyl Gomonovych Reviewed-by: Jean Delvare Signed-off-by: Rafael J. Wysocki

PNP: remove unneeded kallsyms include

2017-12-13T00:40:44+00:00

The file was converted from print_fn_descriptor_symbol() to %pF some time ago (2e532d68a2b3e2aa {pci,pnp} quirks.c: don't use deprecated print_fn_descriptor_symbol()). kallsyms does not seem to be needed anymore. Signed-off-by: Sergey Senozhatsky Signed-off-by: Rafael J. Wysocki

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

dmi: Mark all struct dmi_system_id instances const

2017-09-14T09:59:30+00:00

... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig Signed-off-by: Jean Delvare

Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2017-07-07T19:40:27+00:00

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...

ACPI / PM: Consolidate device wakeup settings code

2017-06-27T23:52:32+00:00

Currently, there are two separate ways of handling device wakeup settings in the ACPI core, depending on whether this is runtime wakeup or system wakeup (from sleep states). However, after the previous commit eliminating the run_wake ACPI device wakeup flag, there is no difference between the two any more at the ACPI level, so they can be combined. For this reason, introduce acpi_pm_set_device_wakeup() to replace both acpi_pm_device_run_wake() and acpi_pm_device_sleep_wake() and make it check the ACPI device object's wakeup.valid flag to determine whether or not the device can be set up to generate wakeup signals. Also notice that zpodd_enable/disable_run_wake() only call device_set_run_wake() because acpi_pm_device_run_wake() called device_run_wake(), which is not done by acpi_pm_set_device_wakeup(), so drop the now redundant device_set_run_wake() calls from there. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg Acked-by: Bjorn Helgaas

PNP / ACPI: remove FSF address

2017-05-29T09:28:46+00:00

There is no point in keeping an address in the file since it's subject to change. Signed-off-by: Andy Shevchenko Reviewed-by: Mika Westerberg Signed-off-by: Linus Walleij