kernel/linux.git/drivers/platform, branch v5.6.17

platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA

2020-05-27T15:48:11+00:00

[ Upstream commit 3bd12da7f50b8bc191fcb3bab1f55c582234df59 ] asus-nb-wmi does not add any extra functionality on these Asus Transformer books. They have detachable keyboards, so the hotkeys are send through a HID device (and handled by the hid-asus driver) and also the rfkill functionality is not used on these devices. Besides not adding any extra functionality, initializing the WMI interface on these devices actually has a negative side-effect. For some reason the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED, high and there is no (WMI or other) interface to drive this low again causing the LED to be permanently on, even during suspend. This commit adds a blacklist of DMI system_ids on which not to load the asus-nb-wmi and adds these Transformer books to this list. This fixes the webcam LED being permanently on under Linux. Signed-off-by: Hans de Goede Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin

platform/x86: GPD pocket fan: Fix error message when temp-limits are out of range

2020-05-10T08:32:52+00:00

commit 1d6f8c5bac93cceb2d4ac8e6331050652004d802 upstream. Commit 1f27dbd8265d ("platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits") changed the module-param sanity check to accept temperature limits between 20 and 90 degrees celcius. But the error message printed when the module params are outside this range was not updated. This commit updates the error message to match the new min and max value for the temp-limits. Reported-by: Pavel Machek Signed-off-by: Hans de Goede Acked-by: Pavel Machek Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

platform/chrome: cros_ec: Query EC protocol version if EC transitions between RO/RW

2020-04-23T08:38:22+00:00

[ Upstream commit 42cd0ab476e2daffc23982c37822a78f9a53cdd5 ] RO and RW of EC may have different EC protocol version. If EC transitions between RO and RW, but AP does not reboot (this is true for fingerprint microcontroller / cros_fp, but not true for main ec / cros_ec), the AP still uses the protocol version queried before transition, which can cause problems. In the case of fingerprint microcontroller, this causes AP to send the wrong version of EC_CMD_GET_NEXT_EVENT to RO in the interrupt handler, which in turn prevents RO to clear the interrupt line to AP, in an infinite loop. Once an EC_HOST_EVENT_INTERFACE_READY is received, we know that there might have been a transition between RO and RW, so re-query the protocol. Signed-off-by: Yicheng Li Tested-by: Marek Szyprowski Reviewed-by: Gwendal Grignou Signed-off-by: Enric Balletbo i Serra Signed-off-by: Sasha Levin

platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID

2020-04-23T08:38:12+00:00

[ Upstream commit d5764dc597467664a1a70ab66a2314a011aeccd4 ] Tiger Lake's new unique ACPI device IDs for intel-hid driver is not valid because of missing 'C' in the ID. Fix the ID by updating it. After the update, the new ID should now look like INT1051 --> INTC1051 Fixes: bdd11b654035 ("platform/x86: intel-hid: Add Tiger Lake ACPI device ID") Suggested-by: Srinivas Pandruvada Signed-off-by: Gayatri Kammela Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

platform/chrome: cros_ec_rpmsg: Fix race with host event

2020-04-21T07:08:00+00:00

commit f775ac78fcfc6bdc96bdda07029d11f2a5e84869 upstream. Host event can be sent by remoteproc by any time, and cros_ec_rpmsg_callback would be called after cros_ec_rpmsg_create_ept. But the cros_ec_device is initialized after that, which cause host event handler to use cros_ec_device that are not initialized properly yet. Fix this by don't schedule host event handler before cros_ec_register returns. Instead, remember that we have a pending host event, and schedule host event handler after cros_ec_register. Fixes: 71cddb7097e2 ("platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed.") Signed-off-by: Pi-Hsun Shih Signed-off-by: Enric Balletbo i Serra Signed-off-by: Greg Kroah-Hartman

platform/x86: asus-wmi: Support laptops where the first battery is named BATT

2020-04-17T14:13:32+00:00

commit 6b3586d45bba14f6912f37488090c37a3710e7b4 upstream. The WMI method to set the charge threshold does not provide a way to specific a battery, so we assume it is the first/primary battery (by checking if the name is BAT0). On some newer ASUS laptops (Zenbook UM431DA) though, the primary/first battery isn't named BAT0 but BATT, so we need to support that case. Fixes: 7973353e92ee ("platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API") Cc: stable@vger.kernel.org Signed-off-by: Kristian Klausen Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()

2020-04-13T11:17:58+00:00

commit 767191db8220db29f78c031f4d27375173c336d5 upstream. The Power Management Events (PMEs) the INT0002 driver listens for get signalled by the Power Management Controller (PMC) using the same IRQ as used for the ACPI SCI. Since commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") the SCI triggering, without there being a wakeup cause recognized by the ACPI sleep code, will no longer wakeup the system. This breaks PMEs / wakeups signalled to the INT0002 driver, the system never leaves the s2idle_loop() now. Use acpi_register_wakeup_handler() to register a function which checks the GPE0a_STS register for a PME and trigger a wakeup when a PME has been signalled. Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Cc: 5.4+ # 5.4+ Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

platform/x86: pmc_atom: Add Lex 2I385SW to critclk_systems DMI table

2020-04-02T06:02:31+00:00

commit 95b31e35239e5e1689e3d965d692a313c71bd8ab upstream. The Lex 2I385SW board has two Intel I211 ethernet controllers. Without this patch, only the first port is usable. The second port fails to start with the following message: igb: probe of 0000:02:00.0 failed with error -2 Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Tested-by: Georg Müller Signed-off-by: Georg Müller Reviewed-by: Hans de Goede Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

platform/chrome: wilco_ec: Include asm/unaligned instead of linux/ path

2020-02-11T08:10:36+00:00

It seems that we shouldn't try to include the include/linux/ path to unaligned functions. Just include asm/unaligned.h instead so that we don't run into compilation warnings like below. In file included from drivers/platform/chrome/wilco_ec/properties.c:8:0: include/linux/unaligned/le_memmove.h:7:19: error: redefinition of 'get_unaligned_le16' static inline u16 get_unaligned_le16(const void *p) ^~~~~~~~~~~~~~~~~~ In file included from arch/ia64/include/asm/unaligned.h:5:0, from arch/ia64/include/asm/io.h:23, from arch/ia64/include/asm/smp.h:21, from include/linux/smp.h:68, from include/linux/percpu.h:7, from include/linux/arch_topology.h:9, from include/linux/topology.h:30, from include/linux/gfp.h:9, from include/linux/xarray.h:14, from include/linux/radix-tree.h:18, from include/linux/idr.h:15, from include/linux/kernfs.h:13, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/device.h:16, from include/linux/platform_data/wilco-ec.h:11, from drivers/platform/chrome/wilco_ec/properties.c:6: include/linux/unaligned/le_struct.h:7:19: note: previous definition of 'get_unaligned_le16' was here static inline u16 get_unaligned_le16(const void *p) ^~~~~~~~~~~~~~~~~~ Reported-by: kbuild test robot Fixes: 60fb8a8e93ca ("platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST") Signed-off-by: Stephen Boyd Signed-off-by: Enric Balletbo i Serra

Merge branch 'akpm' (patches from Andrew)

2020-02-04T07:24:48+00:00

Merge more updates from Andrew Morton: "The rest of MM and the rest of everything else: hotfixes, ipc, misc, procfs, lib, cleanups, arm" * emailed patches from Andrew Morton : (67 commits) ARM: dma-api: fix max_pfn off-by-one error in __dma_supported() treewide: remove redundant IS_ERR() before error code check include/linux/cpumask.h: don't calculate length of the input string lib: new testcases for bitmap_parse{_user} lib: rework bitmap_parse() lib: make bitmap_parse_user a wrapper on bitmap_parse lib: add test for bitmap_parse() bitops: more BITS_TO_* macros lib/string: add strnchrnul() proc: convert everything to "struct proc_ops" proc: decouple proc from VFS with "struct proc_ops" asm-generic/tlb: provide MMU_GATHER_TABLE_FREE asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE asm-generic/tlb: rename HAVE_RCU_TABLE_FREE asm-generic/tlb: add missing CONFIG symbol asm-gemeric/tlb: remove stray function declarations asm-generic/tlb: avoid potential double flush mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case ...