kernel/linux.git/drivers/platform, branch v5.18.2

platform/surface: aggregator: Fix initialization order when compiling as builtin module

2022-05-06T11:05:57+00:00

When building the Surface Aggregator Module (SAM) core, registry, and other SAM client drivers as builtin modules (=y), proper initialization order is not guaranteed. Due to this, client driver registration (triggered by device registration in the registry) races against bus initialization in the core. If any attempt is made at registering the device driver before the bus has been initialized (i.e. if bus initialization fails this race) driver registration will fail with a message similar to: Driver surface_battery was unable to register with bus_type surface_aggregator because the bus was not initialized Switch from module_init() to subsys_initcall() to resolve this issue. Note that the serdev subsystem uses postcore_initcall() so we are still able to safely register the serdev device driver for the core. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Reported-by: Blaž Hrastnik Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220429195738.535751-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/surface: gpe: Add support for Surface Pro 8

2022-05-06T11:05:57+00:00

The new Surface Pro 8 uses GPEs for lid events as well. Add an entry for that so that the lid can be used to wake the device. Note that this is a device with a keyboard type-cover, where this acts as the "lid". Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220429180049.1282447-1-luzmaximilian@gmail.com Signed-off-by: Hans de Goede

platform/x86/intel: Fix 'rmmod pmt_telemetry' panic

2022-05-06T11:05:57+00:00

'rmmod pmt_telemetry' panics with: BUG: kernel NULL pointer dereference, address: 0000000000000040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 1697 Comm: rmmod Tainted: G S W -------- --- 5.18.0-rc4 #3 Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3056.B00.2201310233 01/31/2022 RIP: 0010:device_del+0x1b/0x3d0 Code: e8 1a d9 e9 ff e9 58 ff ff ff 48 8b 08 eb dc 0f 1f 44 00 00 41 56 41 55 41 54 55 48 8d af 80 00 00 00 53 48 89 fb 48 83 ec 18 <4c> 8b 67 40 48 89 ef 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 RSP: 0018:ffffb520415cfd60 EFLAGS: 00010286 RAX: 0000000000000070 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000080 R08: ffffffffffffffff R09: ffffb520415cfd78 R10: 0000000000000002 R11: ffffb520415cfd78 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f7e198e5740(0000) GS:ffff905c9f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 000000010782a005 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: ? __xa_erase+0x53/0xb0 device_unregister+0x13/0x50 intel_pmt_dev_destroy+0x34/0x60 [pmt_class] pmt_telem_remove+0x40/0x50 [pmt_telemetry] auxiliary_bus_remove+0x18/0x30 device_release_driver_internal+0xc1/0x150 driver_detach+0x44/0x90 bus_remove_driver+0x74/0xd0 auxiliary_driver_unregister+0x12/0x20 pmt_telem_exit+0xc/0xe4a [pmt_telemetry] __x64_sys_delete_module+0x13a/0x250 ? syscall_trace_enter.isra.19+0x11e/0x1a0 do_syscall_64+0x58/0x80 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x67/0x80 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x67/0x80 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x67/0x80 ? exc_page_fault+0x64/0x140 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7e1803a05b Code: 73 01 c3 48 8b 0d 2d 4e 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 4d 38 00 f7 d8 64 89 01 48 The probe function, pmt_telem_probe(), adds an entry for devices even if they have not been initialized. This results in the array of initialized devices containing both initialized and uninitialized entries. This causes a panic in the remove function, pmt_telem_remove() which expects the array to only contain initialized entries. Only use an entry when a device is initialized. Cc: "David E. Box" Cc: Hans de Goede Cc: Mark Gross Cc: platform-driver-x86@vger.kernel.org Signed-off-by: David Arcari Signed-off-by: Prarit Bhargava Reviewed-by: David E. Box Link: https://lore.kernel.org/r/20220429122322.2550003-1-prarit@redhat.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: thinkpad_acpi: Correct dual fan probe

2022-05-06T11:05:57+00:00

There was an issue with the dual fan probe whereby the probe was failing as it assuming that second_fan support was not available. Corrected the logic so the probe works correctly. Cleaned up so quirks only used if 2nd fan not detected. Tested on X1 Carbon 10 (2 fans), X1 Carbon 9 (2 fans) and T490 (1 fan) Signed-off-by: Mark Pearson Link: https://lore.kernel.org/r/20220502191200.63470-1-markpearson@lenovo.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops

2022-05-06T11:05:57+00:00

Lenovo laptops that contain NVME SSDs across a variety of generations have trouble resuming from suspend to idle when the IOMMU translation layer is active for the NVME storage device. This generally manifests as a large resume delay or page faults. These delays and page faults occur as a result of a Lenovo BIOS specific SMI that runs during the D3->D0 transition on NVME devices. This SMI occurs because of a flag that is set during resume by Lenovo firmware: ``` OperationRegion (PM80, SystemMemory, 0xFED80380, 0x10) Field (PM80, AnyAcc, NoLock, Preserve) { SI3R, 1 } Method (_ON, 0, NotSerialized) // _ON_: Power On { TPST (0x60D0) If ((DAS3 == 0x00)) { If (SI3R) { TPST (0x60E0) M020 (NBRI, 0x00, 0x00, 0x04, (NCMD | 0x06)) M020 (NBRI, 0x00, 0x00, 0x10, NBAR) APMC = HDSI /* \HDSI */ SLPS = 0x01 SI3R = 0x00 TPST (0x60E1) } D0NV = 0x01 } } ``` Create a quirk that will run early in the resume process to prevent this SMI from running. As any of these machines are fixed, they can be peeled back from this quirk or narrowed down to individual firmware versions. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1910 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1689 Signed-off-by: Mario Limonciello Tested-by: Mark Pearson Link: https://lore.kernel.org/r/20220429030501.1909-3-mario.limonciello@amd.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86: thinkpad_acpi: Convert btusb DMI list to quirks

2022-05-06T11:05:57+00:00

DMI matching in thinkpad_acpi happens local to a function meaning quirks can only match that function. Future changes to thinkpad_acpi may need to quirk other code, so change this to use a quirk infrastructure. Signed-off-by: Mario Limonciello Tested-by: Mark Pearson Link: https://lore.kernel.org/r/20220429030501.1909-2-mario.limonciello@amd.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86/intel: pmc/core: change pmc_lpm_modes to static

2022-04-27T14:55:54+00:00

Sparse reports this issue core.c: note: in included file: core.h:239:12: warning: symbol 'pmc_lpm_modes' was not declared. Should it be static? Global variables should not be defined in headers. This only works because core.h is only included by core.c. Single file use variables should be static, so change its storage-class specifier to static. Signed-off-by: Tom Rix Reviewed-by: David E. Box Link: https://lore.kernel.org/r/20220423123048.591405-1-trix@redhat.com Signed-off-by: Hans de Goede

platform/x86/intel/sdsi: Fix bug in multi packet reads

2022-04-27T14:55:54+00:00

Fix bug that added an offset to the mailbox addr during multi-packet reads. Did not affect current ABI since it doesn't support multi-packet transactions. Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box Link: https://lore.kernel.org/r/20220420155622.1763633-4-david.e.box@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86/intel/sdsi: Poll on ready bit for writes

2022-04-27T14:55:54+00:00

Due to change in firmware flow, update mailbox writes to poll on ready bit instead of run_busy bit. This change makes the polling method consistent for both writes and reads, which also uses the ready bit. Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box Link: https://lore.kernel.org/r/20220420155622.1763633-3-david.e.box@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/x86/intel/sdsi: Handle leaky bucket

2022-04-27T14:55:54+00:00

To prevent an agent from indefinitely holding the mailbox firmware has implemented a leaky bucket algorithm. Repeated access to the mailbox may now incur a delay of up to 2.1 seconds. Add a retry loop that tries for up to 2.5 seconds to acquire the mailbox. Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box Link: https://lore.kernel.org/r/20220420155622.1763633-2-david.e.box@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede