kernel/linux.git/drivers/platform/x86/Makefile, branch linux-4.20.y

platform/x86: Add Intel AtomISP2 dummy / power-management driver

2018-10-29T12:02:14+00:00

The Image Signal Processor found on Cherry Trail devices is brought up in D0 state on devices which have camera sensors attached to it. The ISP will not enter D3 state again without some massaging of its registers beforehand and the ISP not being in D3 state blocks the SoC from entering S0ix modes. There was a driver for the ISP in drivers/staging but that got removed again because it never worked. It does not seem likely that a real driver for the ISP will be added to the mainline kernel anytime soon. This commit adds a dummy driver which contains the necessary magic from the staging driver to powerdown the ISP, so that Cherry Trail devices where the ISP is used will properly use S0ix modes when suspended. Together with other recent S0ix related fixes this allows S0ix modes to be entered on e.g. a Chuwi Hi8 Pro and a HP x2 210. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196915 Signed-off-by: Hans de Goede Reviewed-by: Alan Cox Signed-off-by: Andy Shevchenko

platform/x86: Add LG Gram laptop special features driver

2018-10-19T16:21:57+00:00

A driver for LG Gram laptop supporting features not available through the standard interfaces: - Support for the 5 Fn keys that generate ACPI or WMI events. - Two software controlled LEDs: keyboard backlight (also controlled by hardware) and touchpad LED. - Extra features: reader mode, Fn lock, cooling mode, USB charge mode, and maximal battery charging level. Signed-off-by: Matan Ziv-Av Signed-off-by: Andy Shevchenko

firmware: dcdbas: Move dcdbas to drivers/platform/x86

2018-09-27T09:18:15+00:00

Move dcdbas to the more appropriate directory drivers/platform/x86. Signed-off-by: Stuart Hayes Signed-off-by: Andy Shevchenko

firmware: dell_rbu: Move dell_rbu to drivers/platform/x86

2018-09-27T09:18:15+00:00

Move dell_rbu to the more appropriate directory drivers/platform/x86. Signed-off-by: Stuart Hayes Signed-off-by: Andy Shevchenko

Merge tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86

2018-08-22T21:14:15+00:00

Pull x86 platform driver updates from Andy Shevchenko: - The driver for Silead touchscreen configurations has been renamed from silead_dmi to touchscreen_dmi since it starts supporting other touchscreens which require some DMI quirks It also gets expanded to cover cases for Chuwi Vi10, ONDA V891W, Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets. - Another bunch of changes is related to Mellanox platform code to allow user space to communicate with Mellanox for system control and monitoring purposes. The driver notifies user on hotplug device signal receiving. - ASUS WMI drivers recognize lid flip action on UX360, and correctly toggles airplane mode LED. In addition the keyboard backlight toggle gets support. - ThinkPad ACPI driver enables support for calculator key (on at least P52). It also has been fixed to support three characters model designators, which are used for modern laptops. Earlier the battery, marked as BAT1, on ThinkPad laptops has not been configured properly, which is fixed. On the opposite the multi-battery configurations now probed correctly. - Dell SMBIOS driver starts working on some Dell servers which do not support token interface. The regression with backlight detection has also been fixed. In order to support dock mode on some laptops, Intel virtual button driver has been fixed. The last but not least is the fix to Intel HID driver due to changes in Dell systems that prevented to use power button. * tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86: (47 commits) platform/x86: acer-wmi: Silence "unsupported" message a bit platform/x86: intel_punit_ipc: fix build errors platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360 platform/x86: acer-wmi: refactor function has_cap platform/x86: thinkpad_acpi: Fix multi-battery bug platform/x86: thinkpad_acpi: extend battery quirk coverage platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init() platform/x86: mlx-platform: Remove unused define platform/x86: mlx-platform: Change mlxreg-io configuration for MSN274x systems Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Allow mlxreg-io driver activation for more systems platform/x86: mlx-platform: Add ASIC hotplug device configuration platform/mellanox: mlxreg-hotplug: Add hotplug hwmon uevent notification platform/mellanox: mlxreg-hotplug: Improve mechanism of ASIC health discovery platform/x86: mlx-platform: Add mlxreg-fan platform driver activation platform/x86: dell-laptop: Fix backlight detection platform/x86: toshiba_acpi: Fix defined but not used build warnings platform/x86: thinkpad_acpi: Support battery quirk ...

platform/x86: Add ACPI i2c-multi-instantiate pseudo driver

2018-08-09T11:58:21+00:00

On systems with ACPI instantiated i2c-clients, normally there is 1 fw_node per i2c-device and that fw-node contains 1 I2cSerialBus resource for that 1 i2c-device. But in some rare cases the manufacturer has decided to describe multiple i2c-devices in a single ACPI fwnode with multiple I2cSerialBus resources. An earlier attempt to fix this in the i2c-core resulted in a lot of extra code to support this corner-case. This commit introduces a new i2c-multi-instantiate driver which fixes this in a different way. This new driver can be built as a module which will only loaded on affected systems. This driver will instantiate a new i2c-client per I2cSerialBus resource, using the driver_data from the acpi_device_id it is binding to to tell it which chip-type (and optional irq-resource) to use when instantiating. Note this driver depends on a platform device being instantiated for the ACPI fwnode, see the i2c_multi_instantiate_ids list of ACPI device-ids in drivers/acpi/scan.c: acpi_device_enumeration_by_parent(). Acked-by: Andy Shevchenko Acked-by: Wolfram Sang Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

platform/x86: Rename silead_dmi to touchscreen_dmi

2018-07-02T12:00:30+00:00

Not only silead touchscreens need some extra info not available in the ACPI tables to work properly. X86 devices with a Chipone ICN8505 chip also need some DMI based extra configuration. There is no reason to have separate dmi config code per touchscreen controller vendor. This commit renames silead_dmi to a more generic touchscreen_dmi name (and Kconfig option) in preparation of adding info for tablets with an ICN8505 based touchscreen. Note there are no functional changes all code changes are limited to removing references to silead where these are no longer applicable. Acked-by: Andy Shevchenko Acked-by: Ard Biesheuvel Signed-off-by: Hans de Goede Signed-off-by: Andy Shevchenko

platform/x86: dell-smbios: Link all dell-smbios-* modules together

2018-03-09T17:35:42+00:00

Some race conditions were raised due to dell-smbios and its backends not being ready by the time that a consumer would call one of the exported methods. To avoid this problem, guarantee that all initialization has been done by linking them all together and running init for them all. As part of this change the Kconfig needs to be adjusted so that CONFIG_DELL_SMBIOS_SMM and CONFIG_DELL_SMBIOS_WMI are boolean rather than modules. CONFIG_DELL_SMBIOS is a visually selectable option again and both CONFIG_DELL_SMBIOS_WMI and CONFIG_DELL_SMBIOS_SMM are optional. Signed-off-by: Mario Limonciello [dvhart: Update prompt and help text for DELL_SMBIOS_* backends] Signed-off-by: Darren Hart (VMware)

platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base

2018-03-09T17:35:30+00:00

This is being done to faciliate a later change to link all the dell-smbios drivers together. Signed-off-by: Mario Limonciello Signed-off-by: Darren Hart (VMware)

platform/x86: Move Mellanox platform hotplug driver to platform/mellanox

2018-01-31T18:36:48+00:00

In preparation for making the hotplug driver build for different architectures, move mlxcpld-hotplug.c to platform/mellanox and the header to include/linux/platform_data as mlxreg.h to reflect the new interface changes to come. Replace references to CPLD with REG throughout the files, consistent with the new name. Signed-off-by: Vadim Pasternak Acked-by: Andy Shevchenko [dvhart: update copyright, rewrite commit message] Signed-off-by: Darren Hart (VMware)