kernel/linux.git/drivers/platform/surface/aggregator, branch v6.6.132

platform/surface: aggregator: Fix warning when controller is destroyed in probe

2024-08-29T15:33:44+00:00

[ Upstream commit bc923d594db21bee0ead128eb4bb78f7e77467a4 ] There is a small window in ssam_serial_hub_probe() where the controller is initialized but has not been started yet. Specifically, between ssam_controller_init() and ssam_controller_start(). Any failure in this window, for example caused by a failure of serdev_device_open(), currently results in an incorrect warning being emitted. In particular, any failure in this window results in the controller being destroyed via ssam_controller_destroy(). This function checks the state of the controller and, in an attempt to validate that the controller has been cleanly shut down before we try and deallocate any resources, emits a warning if that state is not SSAM_CONTROLLER_STOPPED. However, since we have only just initialized the controller and have not yet started it, its state is SSAM_CONTROLLER_INITIALIZED. Note that this is the only point at which the controller has this state, as it will change after we start the controller with ssam_controller_start() and never revert back. Further, at this point no communication has taken place and the sender and receiver threads have not been started yet (and we may not even have an open serdev device either). Therefore, it is perfectly safe to call ssam_controller_destroy() with a state of SSAM_CONTROLLER_INITIALIZED. This, however, means that the warning currently being emitted is incorrect. Fix it by extending the check. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20240811124645.246016-1-luzmaximilian@gmail.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin

platform/surface: aggregator: fix recv_buf() return value

2023-12-13T17:45:24+00:00

commit c8820c92caf0770bec976b01fa9e82bb993c5865 upstream. Serdev recv_buf() callback is supposed to return the amount of bytes consumed, therefore an int in between 0 and count. Do not return negative number in case of issue, when ssam_controller_receive_buf() returns ESHUTDOWN just returns 0, e.g. no bytes consumed, this keep the exact same behavior as it was before. This fixes a potential WARN in serdev-ttyport.c:ttyport_receive_buf(). Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Cc: stable@vger.kernel.org Signed-off-by: Francesco Dolcini Reviewed-by: Maximilian Luz Link: https://lore.kernel.org/r/20231128194935.11350-1-francesco@dolcini.it Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman

Merge tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2023-06-30T16:37:26+00:00

Pull RISC-V updates from Palmer Dabbelt: - Support for ACPI - Various cleanups to the ISA string parsing, including making them case-insensitive - Support for the vector extension - Support for independent irq/softirq stacks - Our CPU DT binding now has "unevaluatedProperties: false" * tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits) riscv: hibernate: remove WARN_ON in save_processor_state dt-bindings: riscv: cpus: switch to unevaluatedProperties: false dt-bindings: riscv: cpus: add a ref the common cpu schema riscv: stack: Add config of thread stack size riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK RISC-V: always report presence of extensions formerly part of the base ISA dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support RISC-V: remove decrement/increment dance in ISA string parser RISC-V: rework comments in ISA string parser RISC-V: validate riscv,isa at boot, not during ISA string parsing RISC-V: split early & late of_node to hartid mapping RISC-V: simplify register width check in ISA string parsing perf: RISC-V: Limit the number of counters returned from SBI riscv: replace deprecated scall with ecall riscv: uprobes: Restore thread.bad_cause riscv: mm: try VMA lock-based page fault handling first riscv: mm: Pre-allocate PGD entries for vmalloc/modules area RISC-V: hwprobe: Expose Zba, Zbb, and Zbs RISC-V: Track ISA extensions per hart ...

platform/surface: Disable for RISC-V

2023-06-01T15:44:57+00:00

With CONFIG_ACPI enabled for RISC-V, this driver gets enabled in allmodconfig build. However, RISC-V doesn't support sub-word atomics which is used by this driver and hence allmodconfig build will fail. There is currently no plan to support this driver for RISC-V. So, disable this driver for RISC-V even when ACPI is enabled. Signed-off-by: Sunil V L Acked-by: Maximilian Luz Link: https://lore.kernel.org/r/20230515054928.2079268-3-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt

platform/surface: aggregator: Allow completion work-items to be executed in parallel

2023-05-30T09:20:16+00:00

Currently, event completion work-items are restricted to be run strictly in non-parallel fashion by the respective workqueue. However, this has lead to some problems: In some instances, the event notifier function called inside this completion workqueue takes a non-negligible amount of time to execute. One such example is the battery event handling code (surface_battery.c), which can result in a full battery information refresh, involving further synchronous communication with the EC inside the event handler. This is made worse if the communication fails spuriously, generally incurring a multi-second timeout. Since the event completions are run strictly non-parallel, this blocks other events from being propagated to the respective subsystems. This becomes especially noticeable for keyboard and touchpad input, which also funnel their events through this system. Here, users have reported occasional multi-second "freezes". Note, however, that the event handling system was never intended to run purely sequentially. Instead, we have one work struct per EC/SAM subsystem, processing the event queue for that subsystem. These work structs were intended to run in parallel, allowing sequential processing of work items for each subsystem but parallel processing of work items across subsystems. The only restriction to this is the way the workqueue is created. Therefore, replace create_workqueue() with alloc_workqueue() and do not restrict the maximum number of parallel work items to be executed on that queue, resolving any cross-subsystem blockage. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Link: https://github.com/linux-surface/linux-surface/issues/1026 Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20230525210110.2785470-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/surface: aggregator: Add missing fwnode_handle_put()

2023-03-22T14:23:03+00:00

In fwnode_for_each_child_node(), we should add fwnode_handle_put() when break out of the iteration fwnode_for_each_child_node() as it will automatically increase and decrease the refcounter. Fixes: fc622b3d36e6 ("platform/surface: Set up Surface Aggregator device registry") Signed-off-by: Liang He Reviewed-by: Maximilian Luz Link: https://lore.kernel.org/r/20230322033057.1855741-1-windhl@126.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-02-24T20:58:55+00:00

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...

platform/surface: aggregator: Rename top-level request functions to avoid ambiguities

2023-02-02T21:48:20+00:00

We currently have a struct ssam_request_sync and a function ssam_request_sync(). While this is valid C, there are some downsides to it. One of these is that current Sphinx versions (>= 3.0) cannot disambiguate between the two (see disucssion and pull request linked below). It instead emits a "WARNING: Duplicate C declaration" and links for the struct and function in the resulting documentation link to the same entry (i.e. both to either function or struct documentation) instead of their respective own entries. While we could just ignore that and wait for a fix, there's also a point to be made that the current naming can be somewhat confusing when searching (e.g. via grep) or trying to understand the levels of abstraction at play: We currently have struct ssam_request_sync and associated functions ssam_request_sync_[alloc|free|init|wait|...]() operating on this struct. However, function ssam_request_sync() is one abstraction level above this. Similarly, ssam_request_sync_with_buffer() is not a function operating on struct ssam_request_sync, but rather a sibling to ssam_request_sync(), both using the struct under the hood. Therefore, rename the top level request functions: ssam_request_sync() -> ssam_request_do_sync() ssam_request_sync_with_buffer() -> ssam_request_do_sync_with_buffer() ssam_request_sync_onstack() -> ssam_request_do_sync_onstack() Link: https://lore.kernel.org/all/085e0ada65c11da9303d07e70c510dc45f21315b.1656756450.git.mchehab@kernel.org/ Link: https://github.com/sphinx-doc/sphinx/pull/8313 Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20221220175608.1436273-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/surface: aggregator: Add target and source IDs to command trace events

2023-02-02T21:48:20+00:00

Add command source and target IDs to trace events. Tracing support for the Surface Aggregator driver was originally implemented at a time when only two peers were known: Host and SAM. We now know that there are at least five, with three actively being used (Host, SAM, KIP; four with Debug if you want to count manually enabling that interface). So it makes sense to also explicitly name the peers involved when tracing. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20221202223327.690880-4-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

platform/surface: aggregator: Improve documentation and handling of message target and source IDs

2023-02-02T21:48:20+00:00

The `tid_in` and `tid_out` fields of the serial hub protocol command struct (struct ssh_command) are actually source and target IDs, indicating the peer from which the message originated and the peer for which it is intended. Change the naming of those fields accordingly and improve the protocol documentation. Additionally, introduce an enum containing all currently known peers, i.e. targets and sources. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20221202223327.690880-3-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede