kernel/linux.git/drivers/pinctrl, branch v5.15.212

pinctrl: mediatek: mt8167: Fix Schmitt trigger register offset of pins 34-39

2026-07-24T13:51:33+00:00

[ Upstream commit 439bc91d20188901dac698bed4921caac76d9074 ] The correct Schmitt trigger register offset for pins 34-39 is 0xA00. Value was verified with SoC data sheet. Signed-off-by: Luca Leonardo Scorcia Fixes: 82d70627e94a ("pinctrl: mediatek: Add MT8167 Pinctrl driver") Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: mediatek: mt8516: Fix Schmitt trigger register offset of pins 34-39

2026-07-24T13:51:33+00:00

[ Upstream commit 1c3044cab23a056ea28da47da1cdd667a39df0b8 ] The correct Schmitt trigger register offset for pins 34-39 is 0xA00. Signed-off-by: Luca Leonardo Scorcia Fixes: 264667112ef0 ("pinctrl: mediatek: Add MT8516 Pinctrl driver") Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: sunxi: fix regulator leak in sunxi_pmx_request() error path

2026-07-24T13:51:28+00:00

[ Upstream commit 334f7bcbdc79dc8e5b938ac3372453a5368221cf ] In the error path of sunxi_pmx_request(), the code calls regulator_put(s_reg->regulator) to release the regulator. However, s_reg->regulator is only assigned after a successful regulator_enable(). This causes a memory leak: the regulator obtained via regulator_get() is never properly released when regulator_enable() fails. Fixes: dc1445584177 ("pinctrl: sunxi: Fix and simplify pin bank regulator handling") Signed-off-by: Felix Gu Reviewed-by: Andre Przywara Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: abx500: Fix type of 'argument' variable

2026-06-01T15:35:35+00:00

[ Upstream commit 34006f77890d050e6d80cbee365b5d703c1140b4 ] The argument variable is assigned the return value of pinconf_to_config_argument(), which returns a u32. Change its type from enum pin_config_param to unsigned int to correctly store the configuration argument. Fixes: 03b054e9696c ("pinctrl: Pass all configs to driver on pin_config_set()") Signed-off-by: Yu-Chun Lin Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: pinctrl-pic32: Fix resource leak

2026-06-01T15:35:35+00:00

[ Upstream commit fe5560688f3ba98364c7de7b4f8dc240ffd1ff75 ] Fix three possible resource leaks by using the devres version of clk_prepare_enable(). Also, update error message accordingly. Detected by Smatch: drivers/pinctrl/pinctrl-pic32.c:2211 pic32_pinctrl_probe() warn: 'pctl->clk' from clk_prepare_enable() not released on lines: 2208. drivers/pinctrl/pinctrl-pic32.c:2274 pic32_gpio_probe() warn: 'bank->clk' from clk_prepare_enable() not released on lines: 2264,2272. Fixes: 2ba384e6c3810 ("pinctrl: pinctrl-pic32: Add PIC32 pin control driver") Signed-off-by: Ethan Tidmore Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: intel: Fix the revision for new features (1kOhm PD, HW debouncer)

2026-06-01T15:35:01+00:00

[ Upstream commit a4337a24d13e9e3b98a113e71d6b80dc5ed5f8c4 ] The 1kOhm pull down and hardware debouncer are features of the revision 0.92 of the Chassis specification. Fix that in the code accordingly. Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin

pinctrl: mediatek: common: Fix probe failure for devices without EINT

2026-04-18T08:33:24+00:00

[ Upstream commit 8f9f64c8f90dca07d3b9f1d7ce5d34ccd246c9dd ] Some pinctrl devices like mt6397 or mt6392 don't support EINT at all, but the mtk_eint_init function is always called and returns -ENODEV, which then bubbles up and causes probe failure. To address this only call mtk_eint_init if EINT pins are present. Tested on Xiaomi Mi Smart Clock x04g (mt6392). Fixes: e46df235b4e6 ("pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit") Signed-off-by: Luca Leonardo Scorcia Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: single: fix refcount leak in pcs_add_gpio_func()

2026-03-04T12:19:49+00:00

[ Upstream commit 353353309b0f7afa407df29e455f9d15b5acc296 ] of_parse_phandle_with_args() returns a device_node pointer with refcount incremented in gpiospec.np. The loop iterates through all phandles but never releases the reference, causing a refcount leak on each iteration. Add of_node_put() calls to release the reference after extracting the needed arguments and on the error path when devm_kzalloc() fails. This bug was detected by our static analysis tool and verified by my code review. Fixes: a1a277eb76b3 ("pinctrl: single: create new gpio function range") Signed-off-by: Wei Li Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition

2026-03-04T12:19:49+00:00

[ Upstream commit eabf273c8466af3f033473c2d2267a6ea7946d57 ] The i2s2_data function is available on both gpio12 and gpio13. Fix the groups definition. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Luca Weiss Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: qcom: Extract chip specific LPASS LPI code

2026-03-04T12:19:48+00:00

[ Upstream commit 9ce49018c6928263d41b783c9e4928c6af05db43 ] Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver to allow reusing the common code in the addition of subsequent platforms. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1650285427-19752-6-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Linus Walleij Stable-dep-of: eabf273c8466 ("pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition") Signed-off-by: Sasha Levin