kernel/linux.git/drivers/pinctrl, branch v4.4.171

pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11

2018-12-21T13:09:49+00:00

commit 478b6767ad26ab86d9ecc341027dd09a87b1f997 upstream. Pin PH11 is used on various A83T board to detect a change in the OTG port's ID pin, as in when an OTG host cable is plugged in. The incorrect offset meant the gpiochip/irqchip was activating the wrong pin for interrupts. Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support") Cc: Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant

2018-11-21T08:27:32+00:00

[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ] If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc21257 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-gpio has the same problem. Let's fix it there too. Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers") Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant

2018-11-21T08:27:32+00:00

[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ] If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc21257 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-mpp has the same problem. Let's fix it there too. NOTE: in case it's helpful to someone reading this, the way to tell whether to do the -EINVAL or not is to look at the PCONFDUMP for a given attribute. If the last element (has_arg) is false then you need to do the -EINVAL trick. ALSO NOTE: it seems unlikely that the values returned when we try to get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg" is false for that one, but I guess it's still fine to return different values so I kept doing that. It seems like another driver (ssbi-gpio) uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something similar so maybe a future change should do that here too. Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver") Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: spmi-mpp: Fix drive strength setting

2018-11-21T08:27:32+00:00

[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ] It looks like we parse the drive strength setting here, but never actually write it into the hardware to update it. Parse the setting and then write it at the end of the pinconf setting function so that it actually sticks in the hardware. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Cc: Doug Anderson Signed-off-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux

2018-11-21T08:27:32+00:00

[ Upstream commit 69f8455f6cc78fa6cdf80d0105d7a748106271dc ] 'ret' should be returned while pmic_mpp_write_mode_ctl fails. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Signed-off-by: YueHaibing Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant

2018-09-26T06:35:10+00:00

[ Upstream commit 1cf86bc21257a330e3af51f2a4e885f1a705f6a5 ] If you do this on an sdm845 board: grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups ...it looks like nonsense. For every pin you see listed: input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ... That's because pmic_gpio_config_get() isn't complying with the rules that pinconf_generic_dump_one() expects. Specifically for boolean parameters (anything with a "struct pin_config_item" where has_arg is false) the function expects that the function should return its value not through the "config" parameter but should return "0" if the value is set and "-EINVAL" if the value isn't set. Let's fix this. >From a quick sample of other pinctrl drivers, it appears to be tradition to also return 1 through the config parameter for these boolean parameters when they exist. I'm not one to knock tradition, so I'll follow tradition and return 1 in these cases. While I'm at it, I'll also continue searching for four leaf clovers, kocking on wood three times, and trying not to break mirrors. NOTE: This also fixes an apparent typo for reading PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally using "=" instead of "==" and thus was setting some internal state when you tried to query PIN_CONFIG_BIAS_DISABLE. Oops. Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Signed-off-by: Douglas Anderson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show()

2018-09-05T07:18:39+00:00

commit 19da44cd33a3a6ff7c97fff0189999ff15b241e4 upstream. The info->groups[] array is allocated in imx1_pinctrl_parse_dt(). It has info->ngroups elements. Thus the > here should be >= to prevent reading one element beyond the end of the array. Cc: stable@vger.kernel.org Fixes: 30612cd90005 ("pinctrl: imx1 core driver") Signed-off-by: Dan Carpenter Reviewed-by: Uwe Kleine-König Acked-by: Dong Aisheng Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: at91-pio4: add missing of_node_put

2018-08-06T14:24:34+00:00

[ Upstream commit 21816364715f508c10da1e087e352bc1e326614f ] The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child + of_node_put(child); ? break; ... } ... when != child // Signed-off-by: Julia Lawall Acked-by: Ludovic Desroches Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: Really force states during suspend/resume

2018-03-24T09:58:48+00:00

[ Upstream commit 981ed1bfbc6c4660b2ddaa8392893e20a6255048 ] In case a platform only defaults a "default" set of pins, but not a "sleep" set of pins, and this particular platform suspends and resumes in a way that the pin states are not preserved by the hardware, when we resume, we would call pinctrl_single_resume() -> pinctrl_force_default() -> pinctrl_select_state() and the first thing we do is check that the pins state is the same as before, and do nothing. In order to fix this, decouple the actual state change from pinctrl_select_state() and move it pinctrl_commit_state(), while keeping the p->state == state check in pinctrl_select_state() not to change the caller assumptions. pinctrl_force_sleep() and pinctrl_force_default() are updated to bypass the state check by calling pinctrl_commit_state(). [Linus Walleij] The forced pin control states are currently only used in some pin controller drivers that grab their own reference to their own pins. This is equal to the pin control hogs: pins taken by pin control devices since there are no corresponding device in the Linux device hierarchy, such as memory controller lines or unused GPIO lines, or GPIO lines that are used orthogonally from the GPIO subsystem but pincontrol-wise managed as hogs (non-strict mode, allowing simultaneous use by GPIO and pin control). For this case forcing the state from the drivers' suspend()/resume() callbacks makes sense and should semantically match the name of the function. Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device") Signed-off-by: Florian Fainelli Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: sunxi: Fix A80 interrupt pin bank

2018-02-25T10:03:39+00:00

[ Upstream commit 6ad4cc8d1ac483e0fd33f605fb2788b0ecf51ed4 ] On the A80 the pins on port B can trigger interrupts, and those are assigned to the second interrupt bank. Having two pins assigned to the same interrupt bank/pin combination does not look healthy (instead more like a copy&paste bug from pins PA14-PA16), so fix the interrupt bank for pins PB14-PB16, which is actually 1. I don't have any A80 board, so could not test this. Fixes: d5e9fb31baa2 ("pinctrl: sunxi: Add A80 pinctrl muxing options") Signed-off-by: Andre Przywara Acked-by: Chen-Yu Tsai Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman