kernel/linux.git/drivers/pinctrl, branch v4.19.16

pinctrl: meson: fix pull enable register calculation

2019-01-13T08:50:54+00:00

[ Upstream commit 614b1868a125a0ba24be08f3a7fa832ddcde6bca ] We just changed the code so we apply bias disable on the correct register but forgot to align the register calculation. The result is that we apply the change on the correct register, but possibly at the incorrect offset/bit This went undetected because offsets tends to be the same between REG_PULL and REG_PULLEN for a given pin the EE controller. This is not true for the AO controller. Fixes: e39f9dd8206a ("pinctrl: meson: fix pinconf bias disable") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11

2018-12-19T18:19:50+00:00

commit 478b6767ad26ab86d9ecc341027dd09a87b1f997 upstream. Pin PH11 is used on various A83T board to detect a change in the OTG port's ID pin, as in when an OTG host cable is plugged in. The incorrect offset meant the gpiochip/irqchip was activating the wrong pin for interrupts. Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support") Cc: Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: meson: fix meson8b ao pull register bits

2018-12-01T08:37:31+00:00

[ Upstream commit a1705f02704cd8a24d434bfd0141ee8142ad277a ] AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 0fefcb6876d0 ("pinctrl: Add support for Meson8b") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: fix meson8 ao pull register bits

2018-12-01T08:37:31+00:00

[ Upstream commit e91b162d2868672d06010f34aa83d408db13d3c6 ] AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: fix gxl ao pull register bits

2018-12-01T08:37:31+00:00

[ Upstream commit ed3a2b74f3eb34c84c8377353f4730f05acdfd05 ] AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: fix gxbb ao pull register bits

2018-12-01T08:37:31+00:00

[ Upstream commit 4bc51e1e350cd4707ce6e551a93eae26d40b9889 ] AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: fix pinconf bias disable

2018-12-01T08:37:31+00:00

[ Upstream commit e39f9dd8206ad66992ac0e6218ef1ba746f2cce9 ] If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set() with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will force a pull-down bias on the pin. Instead of the pull type register bank, the driver should access the pull enable register bank. Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant

2018-11-13T19:08:29+00:00

[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ] If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc21257 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-gpio has the same problem. Let's fix it there too. Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers") Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant

2018-11-13T19:08:29+00:00

[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ] If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc21257 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-mpp has the same problem. Let's fix it there too. NOTE: in case it's helpful to someone reading this, the way to tell whether to do the -EINVAL or not is to look at the PCONFDUMP for a given attribute. If the last element (has_arg) is false then you need to do the -EINVAL trick. ALSO NOTE: it seems unlikely that the values returned when we try to get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg" is false for that one, but I guess it's still fine to return different values so I kept doing that. It seems like another driver (ssbi-gpio) uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something similar so maybe a future change should do that here too. Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver") Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: spmi-mpp: Fix drive strength setting

2018-11-13T19:08:28+00:00

[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ] It looks like we parse the drive strength setting here, but never actually write it into the hardware to update it. Parse the setting and then write it at the end of the pinconf setting function so that it actually sticks in the hardware. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Cc: Doug Anderson Signed-off-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman