kernel/linux.git/drivers/pinctrl/sunxi, branch v4.11.5

Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2017-02-22T00:34:22+00:00

Pull pin control updates from Linus Walleij: "Pin control bulk changes for the v4.11 kernel cycle. Core changes: - Switch the generic pin config argument from 16 to 24 bits, only use 8 bits for the configuration type. We might need to encode more information about a certain setting than we need to encode different generic settings. - Add a cross-talk API to the pin control GPIO back-end, utilizing pinctrl_gpio_set_config() from GPIO drivers that want to set up a certain pin configuration in the back-end. This also includes the .set_config() refactoring of the GPIO chips, so that they pass a generic configuration for things like debouncing and single ended (typically open drain). This change has also been merged in an immutable branch to the GPIO tree. - Take hogs with a delayed work, so that we finalize probing a pin controller before trying to get any hogs. - For pin controllers putting all group and function definitions into the device tree, we now have generic code to deal with this and it is used in two drivers so far. - Simplifications of the pin request conflict check. - Make dt_free_map() optional. Updates to drivers: - pinctrl-single now use the generic helpers to generate dynamic group and function tables from the device tree. - Texas Instruments IOdelay configuration driver add-on to pinctrl-single. - i.MX: use radix trees to store groups and functions, use the new generic group and function helpers to manage them. - Intel: add support for hardware debouncing and 1K pull-down. New subdriver for the Gemini Lake SoC. - Renesas SH-PFC: drive strength and bias support, CAN bus muxing, MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791. - Aspeed: use syscon cross-dependencies to set up related bits in the LPC host controller and display controller. - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs. Add banks Y, Z, AA, AB and AC. - AMD: support additional GPIO. - STM32: set this controller to strict muxing mode. STM32H743 MCU support. - Allwinner sunxi: deep simplifications on how to support subvariants of SoCs without adding to much SoC-specific data for each subvariant, especially for sun5i variants. New driver for V3s SoCs. New driver for the H5 SoC. Support A31/A31s variants with the new variant framework. - Mvebu: simplifications to use a MMIO and regmap abstraction. New subdrivers for the 98DX3236, 98DX5241 SoCs. - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC driver to access regmaps. Add infrastructure for pin-bank retention control. Clean out the pin retention control from arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in the Samsung pin control driver(s). - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin. - Qualcomm: use raw spinlock variants: this makes the qualcomm driver realtime-safe" * tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits) pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data() pinctrl: intel: unlock on error in intel_config_set_pull() pinctrl: berlin: make bool drivers explicitly non-modular pinctrl: spear: make bool drivers explicitly non-modular pinctrl: mvebu: make bool drivers explicitly non-modular pinctrl: sunxi: make sun5i explicitly non-modular pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function pinctrl: samsung: mark PM functions as __maybe_unused pinctrl: sunxi: Remove redundant A31s pinctrl driver pinctrl: sunxi: Support A31/A31s with pinctrl variants pinctrl: Amend bindings for STM32 pinctrl pinctrl: Add STM32 pinctrl driver DT bindings pinctrl: stm32: Add STM32H743 MCU support include: dt-bindings: Add STM32H7 pinctrl DT defines gpio: aspeed: Remove dependence on GPIOF_* macros pinctrl: stm32: fix bad location of gpiochip_lock_as_irq drivers: pinctrl: add driver for Allwinner H5 SoC pinctrl: intel: Add Intel Gemini Lake pin controller support pinctrl: intel: Add support for 1k additional pull-down pinctrl: intel: Add support for hardware debouncer ...

pinctrl: sunxi: make sun5i explicitly non-modular

2017-02-06T10:28:22+00:00

We had all these corrected in commit 0c8c6ba00cbf ("pinctrl: sunxi: make bool drivers explicitly non-modular") but this new one recently crept in. The Kconfig currently controlling compilation of this code is: drivers/pinctrl/sunxi/Kconfig:config PINCTRL_SUN5I drivers/pinctrl/sunxi/Kconfig: def_bool MACH_SUN5I ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij Cc: Maxime Ripard Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker Acked-by: Chen-Yu Tsai Signed-off-by: Linus Walleij

pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function

2017-02-06T10:08:07+00:00

There is a stray printk call in the new sun5i pinctrl driver's probe function. Remove it. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Linus Walleij

pinctrl: sunxi: Remove redundant A31s pinctrl driver

2017-02-06T10:06:08+00:00

Now that we can support the A31s pin controller with the A31 driver using the new variants support, the independent A31s driver becomes redundant. Remove it. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Linus Walleij

pinctrl: sunxi: Support A31/A31s with pinctrl variants

2017-02-06T10:05:57+00:00

The A31s is a trimmed down version of the A31. Some hardware blocks are removed, thus not available for muxing on the external pins. Some external pins were directly removed. This makes it easy to support the A31s pin controller with the A31 driver. We just mark the pins and functions that were trimmed as A31 only. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Linus Walleij

drivers: pinctrl: add driver for Allwinner H5 SoC

2017-01-30T15:26:28+00:00

Based on the Allwinner H5 datasheet and the pinctrl driver of the backward-compatible H3 this introduces the pin multiplex assignments for the H5 SoC. H5 introduced some more pin functions (e.g. three more groups of TS pins, and one more groups of SIM pins) than H3. Signed-off-by: Icenowy Zheng Acked-by: Maxime Ripard Signed-off-by: Linus Walleij

pinctrl: sunxi: Don't enforce bias disable (for now)

2017-01-30T08:15:10+00:00

Commit 07fe64ba213f ("pinctrl: sunxi: Handle bias disable") actually enforced enforced the disabling of the pull up/down resistors instead of ignoring it like it was done before. This was part of a wider rework to switch to the generic pinconf bindings, and was meant to be merged together with DT patches that were switching to it, and removing what was considered default values by both the binding and the boards. This included no bias on a pin. However, those DT patches were delayed to 4.11, which would be fine only for a significant number boards having the bias setup wrong, which in turns break the MMC on those boards (and possibly other devices too). In order to avoid conflicts as much as possible, bring back the old behaviour for 4.10, and we'll revert that commit once all the DT bits will have landed. Tested-by: Priit Laes Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai Signed-off-by: Linus Walleij

Merge branch 'ib-pinctrl-genprops' into devel

2017-01-26T14:27:54+00:00

pinctrl: Widen the generic pinconf argument from 16 to 24 bits

2017-01-26T14:22:32+00:00

The current pinconf packed format allows only 16-bit argument limiting the maximum value 65535. For most types this is enough. However, debounce time can be in range of hundreths of milliseconds in case of mechanical switches so we cannot represent the worst case using the current format. In order to support larger values change the packed format so that the lower 8 bits are used as type which leaves 24 bits for the argument. This allows representing values up to 16777215 and debounce times up to 16 seconds. We also convert the existing users to use 32-bit integer when extracting argument from the packed configuration value. Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij

pinctrl: sunxi: add driver for V3s SoC

2017-01-11T15:23:47+00:00

V3s SoC features only a pin controller (for the lack of CPUs part). Add a driver for this controller. Signed-off-by: Icenowy Zheng Acked-by: Maxime Ripard Signed-off-by: Linus Walleij