kernel/linux.git/drivers/pinctrl/qcom, branch v7.0-rc7

pinctrl: qcom: spmi-gpio: implement .get_direction()

2026-03-10T09:21:52+00:00

GPIO controller driver should typically implement the .get_direction() callback as GPIOLIB internals may try to use it to determine the state of a pin. Since introduction of shared proxy, it prints a warning splat when using a shared spmi gpio. The implementation is not easy because the controller supports enabling the input and output logic at the same time, so we aligns on the behaviour of the .get() operation and return -EINVAL in other situations. Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Fixes: d7b5f5cc5eb4 ("pinctrl: qcom: spmi-gpio: Add support for GPIO LV/MV subtype") Signed-off-by: Neil Armstrong Reviewed-by: Konrad Dybcio Reviewed-by: Bartosz Golaszewski Signed-off-by: Linus Walleij

pinctrl: qcom: sdm660-lpass-lpi: Make groups and functions variables static

2026-02-24T09:51:30+00:00

File-scope 'sdm660_lpi_pinctrl_groups' and 'sdm660_lpi_pinctrl_functions' are not used outside of this unit, so make them static to silence sparse warnings: pinctrl-sdm660-lpass-lpi.c:79:27: warning: symbol 'sdm660_lpi_pinctrl_groups' was not declared. Should it be static? pinctrl-sdm660-lpass-lpi.c:116:27: warning: symbol 'sdm660_lpi_pinctrl_functions' was not declared. Should it be static? Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Signed-off-by: Linus Walleij

pinctrl: qcom: qcs615: Add missing dual edge GPIO IRQ errata flag

2026-02-23T09:34:04+00:00

Wakeup capable GPIOs uses PDC as parent IRQ chip and PDC on qcs615 do not support dual edge IRQs. Add missing wakeirq_dual_edge_errata configuration to enable workaround for dual edge GPIO IRQs. Fixes: b698f36a9d40 ("pinctrl: qcom: add the tlmm driver for QCS615 platform") Signed-off-by: Maulik Shah Reviewed-by: Dmitry Baryshkov Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2026-02-16T17:35:24+00:00

Pull pin control updates from Linus Walleij: "Core changes: - Drop the unused devm_pinctrl_unregister() function - Move pretended generic pin control functionality out of the core and into the Amlogic AM4 driver. We have something better coming (hopefully) New hardware support: - Spacemit K3 (RISC-V) pin control support - Atmel AT91 PIO4 (ARM32) SAMA7D65 pin control support - Exynos9610 (ARM64) pin control support - Qualcomm Mahua TLMM (ARM64) pin control support - Microchip Polarfire MSSIO (RISC-V) pin control support - Ocelot LAN9645XF (multiplatform) pin control support Improvements: - Using a few more guards for locking - Various nonurgent fixes and tweaks" * tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (73 commits) pinctrl: generic: move function to amlogic-am4 driver pinctrl: intel: Align Copyright note with corporate guidelines pinctrl: mediatek: remove unused drv_offset field pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree pinctrl: single: fix refcount leak in pcs_add_gpio_func() pinctrl: meson: amlogic-a4: Fix device node reference leak in bank helpers pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition pinctrl: core: Remove duplicate error messages pinctrl: core: Simplify devm_pinctrl_*() pinctrl: core: Remove unused devm_pinctrl_unregister() dt-bindings: pinctrl: spacemit: fix drive-strength check warning pinctrl: fix kismet issues with GENERIC_PINCTRL pinctrl: tangier: Join tng_pinctrl_probe() into its wrapper pinctrl: tangier: Remove duplicate error messages pinctrl: lynxpoint: Remove duplicate error messages pinctrl: cherryview: Remove duplicate error messages pinctrl: baytrail: Remove duplicate error messages pinctrl: intel: Remove duplicate error messages pinctrl: equilibrium: Fix device node reference leak in pinbank_init() dt-bindings: pinctrl: pinctrl-microchip-sgpio: add LAN969x ...

pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition

2026-02-03T00:22:06+00:00

The i2s2_data function is available on both gpio12 and gpio13. Fix the groups definition. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Luca Weiss Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Linus Walleij

pinctrl: lpass-lpi: implement .get_direction() for the GPIO driver

2026-01-27T09:06:27+00:00

GPIO controller driver should typically implement the .get_direction() callback as GPIOLIB internals may try to use it to determine the state of a pin. Add it for the LPASS LPI driver. Reported-by: Abel Vesa Cc: stable@vger.kernel.org Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio Tested-by: Konrad Dybcio # X1E CRD Tested-by: Abel Vesa Signed-off-by: Linus Walleij

pinctrl: qcom: glymur: Add Mahua TLMM support

2026-01-21T12:11:56+00:00

Mahua TLMM block is identical to Glymur, but the PDC wake IRQ map differs since PDC handles the interrupt for GPIO 155 instead of GPIO 143 as seen on Glymur. Hence add the Mahua-specific PDC map to the Glymur TLMM driver. Signed-off-by: Gopikrishna Garmidi Reviewed-by: Dmitry Baryshkov Signed-off-by: Linus Walleij

pinctrl: qcom: sm8350-lpass-lpi: Merge with SC7280 to fix I2S2 and SWR TX pins

2026-01-19T00:13:22+00:00

Qualcomm SC7280 and SM8350 SoCs have slightly different LPASS audio blocks (v9.4.5 and v9.2), however the LPASS LPI pin controllers are exactly the same. The driver for SM8350 has two issues, which can be fixed by simply moving over to SC7280 driver which has them correct: 1. "i2s2_data_groups" listed twice GPIO12, but should have both GPIO12 and GPIO13, 2. "swr_tx_data_groups" contained GPIO5 for "swr_tx_data2" function, but that function is also available on GPIO14, thus listing it twice is not necessary. OTOH, GPIO5 has also "swr_rx_data1", so selecting swr_rx_data function should not block the TX one. Fixes: be9f6d56381d ("pinctrl: qcom: sm8350-lpass-lpi: add SM8350 LPASS TLMM") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Reviewed-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio Signed-off-by: Linus Walleij

pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleeping

2026-01-01T14:40:56+00:00

The gpio_chip settings in this driver say the controller can't sleep but it actually uses a mutex for synchronization. This triggers the following BUG(): [ 9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker) [ 9.233669] preempt_count: 1, expected: 0 [ 9.233673] RCU nest depth: 0, expected: 0 [ 9.233688] Tainted: [W]=WARN [ 9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025 [ 9.233694] Call trace: [ 9.233696] show_stack+0x24/0x38 (C) [ 9.233709] dump_stack_lvl+0x40/0x88 [ 9.233716] dump_stack+0x18/0x24 [ 9.233722] __might_resched+0x148/0x160 [ 9.233731] __might_sleep+0x38/0x98 [ 9.233736] mutex_lock+0x30/0xd8 [ 9.233749] lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi] [ 9.233757] lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi] [ 9.233761] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233772] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233779] gpiod_direction_output+0x38/0xd0 [ 9.233786] gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy] [ 9.233792] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233799] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233806] gpiod_configure_flags+0x2c0/0x580 [ 9.233812] gpiod_find_and_request+0x358/0x4f8 [ 9.233819] gpiod_get_index+0x7c/0x98 [ 9.233826] devm_gpiod_get+0x34/0xb0 [ 9.233829] reset_gpio_probe+0x58/0x128 [reset_gpio] [ 9.233836] auxiliary_bus_probe+0xb0/0xf0 [ 9.233845] really_probe+0x14c/0x450 [ 9.233853] __driver_probe_device+0xb0/0x188 [ 9.233858] driver_probe_device+0x4c/0x250 [ 9.233863] __driver_attach+0xf8/0x2a0 [ 9.233868] bus_for_each_dev+0xf8/0x158 [ 9.233872] driver_attach+0x30/0x48 [ 9.233876] bus_add_driver+0x158/0x2b8 [ 9.233880] driver_register+0x74/0x118 [ 9.233886] __auxiliary_driver_register+0x94/0xe8 [ 9.233893] init_module+0x34/0xfd0 [reset_gpio] [ 9.233898] do_one_initcall+0xec/0x300 [ 9.233903] do_init_module+0x64/0x260 [ 9.233910] load_module+0x16c4/0x1900 [ 9.233915] __arm64_sys_finit_module+0x24c/0x378 [ 9.233919] invoke_syscall+0x4c/0xe8 [ 9.233925] el0_svc_common+0x8c/0xf0 [ 9.233929] do_el0_svc+0x28/0x40 [ 9.233934] el0_svc+0x38/0x100 [ 9.233938] el0t_64_sync_handler+0x84/0x130 [ 9.233943] el0t_64_sync+0x17c/0x180 Mark the controller as sleeping. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Cc: stable@vger.kernel.org Reported-by: Val Packett Closes: https://lore.kernel.org/all/98c0f185-b0e0-49ea-896c-f3972dd011ca@packett.cool/ Signed-off-by: Bartosz Golaszewski Reviewed-by: Dmitry Baryshkov Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2025-12-08T21:45:00+00:00

Pull pin control updates from Linus Walleij: "The technical details below. For me the CIX Semi and Axis Communications ARTPEC-9 SoCs were the most interesting new drivers in this merge window. Core changes: - Handle per-direction skew control in the generic pin config - Drop the pointless subsystem boilerplate banner message during boot. Less noise in the console. It's available as debug message if someone really want it New drivers: - Samsung Exynos 8890 SoC support - Samsung Exynos derived Axis Communications ARTPEC-9 SoC support. These guys literally live next door to me, ARTPEC spells out "Axis Real-Time Picture Encoding Chip" and is tailored for camera image streams and is something they have evolved for a quarter of a century - Mediatek MT6878 SoC support - Qualcomm Glymur PMIC support (mostly just compatible strings) - Qualcomm Kaanapali SoC TLMM support - Microchip pic64gx "gpio2" SoC support - Microchip Polarfire "iomux0" SoC support - CIX Semiconductors SKY1 SoC support - Rockchip RK3506 SoC support - Airhoa AN7583 chip support Improvements: - Improvements for ST Microelectronics STM32 handling of skew settings so input and output can have different skew settings - A whole bunch of device tree binding cleanups: Marvell Armada and Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2 (NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to schema" * tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) pinctrl: add CONFIG_OF dependencies for microchip drivers pinctrl: starfive: use dynamic GPIO base allocation pinctrl: single: Fix incorrect type for error return variable MAINTAINERS: Change Linus Walleij mail address pinctrl: cix: Fix obscure dependency dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data pinctrl: airoha: fix pinctrl function mismatch issue pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges() pinctrl: intel: Export intel_gpio_add_pin_ranges() pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling pinctrl: airoha: convert comma to semicolon pinctrl: elkhartlake: Switch to INTEL_GPP() macro pinctrl: cherryview: Switch to INTEL_GPP() macro pinctrl: emmitsburg: Switch to INTEL_GPP() macro pinctrl: denverton: Switch to INTEL_GPP() macro pinctrl: cedarfork: Switch to INTEL_GPP() macro pinctrl: airoha: add support for Airoha AN7583 PINs dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller ...