kernel/linux.git/drivers/pinctrl/qcom, branch v6.6.142

pinctrl: qcom: Fix wakeirq map by removing disconnected irqs for sm8150

2026-06-01T15:43:11+00:00

[ Upstream commit 52ac35b8a151446481496404af3a8e5e889b3c5a ] PDC interrupts 122-125 were meant for ibi_i3c wakeup but sm8150 do not support i3c. GPIOs 39,51,88 and 144 are also connected to different PDC pin and already reflected in the wake irq map. Remove the unsupported wakeup interrupts from the map. Fixes: 90337380c809 ("pinctrl: qcom: sm8150: Specify PDC map") Reviewed-by: Konrad Dybcio Signed-off-by: Maulik Shah Signed-off-by: Navya Malempati Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition

2026-03-04T12:20:13+00:00

[ Upstream commit eabf273c8466af3f033473c2d2267a6ea7946d57 ] The i2s2_data function is available on both gpio12 and gpio13. Fix the groups definition. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Luca Weiss Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: qcom: sm8350-lpass-lpi: Merge with SC7280 to fix I2S2 and SWR TX pins

2026-02-06T15:48:29+00:00

[ Upstream commit 1fbe3abb449c5ef2178e1c3e3e8b9a43a7a410ac ] Qualcomm SC7280 and SM8350 SoCs have slightly different LPASS audio blocks (v9.4.5 and v9.2), however the LPASS LPI pin controllers are exactly the same. The driver for SM8350 has two issues, which can be fixed by simply moving over to SC7280 driver which has them correct: 1. "i2s2_data_groups" listed twice GPIO12, but should have both GPIO12 and GPIO13, 2. "swr_tx_data_groups" contained GPIO5 for "swr_tx_data2" function, but that function is also available on GPIO14, thus listing it twice is not necessary. OTOH, GPIO5 has also "swr_rx_data1", so selecting swr_rx_data function should not block the TX one. Fixes: be9f6d56381d ("pinctrl: qcom: sm8350-lpass-lpi: add SM8350 LPASS TLMM") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Reviewed-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio Signed-off-by: Linus Walleij [ Context, no dedicated config option ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: lpass-lpi: implement .get_direction() for the GPIO driver

2026-02-06T15:48:28+00:00

[ Upstream commit 4f0d22ec60cee420125f4055af76caa0f373a3fe ] GPIO controller driver should typically implement the .get_direction() callback as GPIOLIB internals may try to use it to determine the state of a pin. Add it for the LPASS LPI driver. Reported-by: Abel Vesa Cc: stable@vger.kernel.org Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio Tested-by: Konrad Dybcio # X1E CRD Tested-by: Abel Vesa Signed-off-by: Linus Walleij [ PIN_CONFIG_LEVEL => PIN_CONFIG_OUTPUT ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleeping

2026-01-17T15:29:53+00:00

commit ebc18e9854e5a2b62a041fb57b216a903af45b85 upstream. The gpio_chip settings in this driver say the controller can't sleep but it actually uses a mutex for synchronization. This triggers the following BUG(): [ 9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker) [ 9.233669] preempt_count: 1, expected: 0 [ 9.233673] RCU nest depth: 0, expected: 0 [ 9.233688] Tainted: [W]=WARN [ 9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025 [ 9.233694] Call trace: [ 9.233696] show_stack+0x24/0x38 (C) [ 9.233709] dump_stack_lvl+0x40/0x88 [ 9.233716] dump_stack+0x18/0x24 [ 9.233722] __might_resched+0x148/0x160 [ 9.233731] __might_sleep+0x38/0x98 [ 9.233736] mutex_lock+0x30/0xd8 [ 9.233749] lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi] [ 9.233757] lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi] [ 9.233761] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233772] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233779] gpiod_direction_output+0x38/0xd0 [ 9.233786] gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy] [ 9.233792] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233799] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233806] gpiod_configure_flags+0x2c0/0x580 [ 9.233812] gpiod_find_and_request+0x358/0x4f8 [ 9.233819] gpiod_get_index+0x7c/0x98 [ 9.233826] devm_gpiod_get+0x34/0xb0 [ 9.233829] reset_gpio_probe+0x58/0x128 [reset_gpio] [ 9.233836] auxiliary_bus_probe+0xb0/0xf0 [ 9.233845] really_probe+0x14c/0x450 [ 9.233853] __driver_probe_device+0xb0/0x188 [ 9.233858] driver_probe_device+0x4c/0x250 [ 9.233863] __driver_attach+0xf8/0x2a0 [ 9.233868] bus_for_each_dev+0xf8/0x158 [ 9.233872] driver_attach+0x30/0x48 [ 9.233876] bus_add_driver+0x158/0x2b8 [ 9.233880] driver_register+0x74/0x118 [ 9.233886] __auxiliary_driver_register+0x94/0xe8 [ 9.233893] init_module+0x34/0xfd0 [reset_gpio] [ 9.233898] do_one_initcall+0xec/0x300 [ 9.233903] do_init_module+0x64/0x260 [ 9.233910] load_module+0x16c4/0x1900 [ 9.233915] __arm64_sys_finit_module+0x24c/0x378 [ 9.233919] invoke_syscall+0x4c/0xe8 [ 9.233925] el0_svc_common+0x8c/0xf0 [ 9.233929] do_el0_svc+0x28/0x40 [ 9.233934] el0_svc+0x38/0x100 [ 9.233938] el0t_64_sync_handler+0x84/0x130 [ 9.233943] el0t_64_sync+0x17c/0x180 Mark the controller as sleeping. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Cc: stable@vger.kernel.org Reported-by: Val Packett Closes: https://lore.kernel.org/all/98c0f185-b0e0-49ea-896c-f3972dd011ca@packett.cool/ Signed-off-by: Bartosz Golaszewski Reviewed-by: Dmitry Baryshkov Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: msm: Fix deadlock in pinmux configuration

2026-01-11T14:21:09+00:00

[ Upstream commit 1c2e70397b4125022dba80f6111271a37fb36bae ] Replace disable_irq() with disable_irq_nosync() in msm_pinmux_set_mux() to prevent deadlock when wakeup IRQ is triggered on the same GPIO being reconfigured. The issue occurs when a wakeup IRQ is triggered on a GPIO and the IRQ handler attempts to reconfigure the same GPIO's pinmux. In this scenario, msm_pinmux_set_mux() calls disable_irq() which waits for the currently running IRQ handler to complete, creating a circular dependency that results in deadlock. Using disable_irq_nosync() avoids waiting for the IRQ handler to complete, preventing the deadlock condition while still properly disabling the interrupt during pinmux reconfiguration. Suggested-by: Prasad Sodagudi Signed-off-by: Praveen Talari Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: qcom: msm: mark certain pins as invalid for interrupts

2025-07-17T16:35:13+00:00

commit 93712205ce2f1fb047739494c0399a26ea4f0890 upstream. On some platforms, the UFS-reset pin has no interrupt logic in TLMM but is nevertheless registered as a GPIO in the kernel. This enables the user-space to trigger a BUG() in the pinctrl-msm driver by running, for example: `gpiomon -c 0 113` on RB2. The exact culprit is requesting pins whose intr_detection_width setting is not 1 or 2 for interrupts. This hits a BUG() in msm_gpio_irq_set_type(). Potentially crashing the kernel due to an invalid request from user-space is not optimal, so let's go through the pins and mark those that would fail the check as invalid for the irq chip as we should not even register them as available irqs. This function can be extended if we determine that there are more corner-cases like this. Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver") Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/20250612091448.41546-1-brgl@bgdev.pl Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: pinctrl-qcm2290: Add missing pins

2025-06-19T13:28:39+00:00

[ Upstream commit 315345610faee8a0568b522dba9e35067d1732ab ] Added the missing pins to the qcm2290_pins table. Signed-off-by: Wojciech Slenska Fixes: 48e049ef1238 ("pinctrl: qcom: Add QCM2290 pinctrl driver") Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/20250523101437.59092-1-wojciech.slenska@gmail.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: qcom: switch to devm_register_sys_off_handler()

2025-06-04T12:42:18+00:00

[ Upstream commit 41e452e6933d14146381ea25cff5e4d1ac2abea1 ] Error-handling paths in msm_pinctrl_probe() don't call a function required to unroll restart handler registration, unregister_restart_handler(). Instead of adding calls to this function, switch the msm pinctrl code into using devm_register_sys_off_handler(). Fixes: cf1fc1876289 ("pinctrl: qcom: use restart_notifier mechanism for ps_hold") Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-2-249999af0fc1@oss.qualcomm.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: qcom/msm: Convert to platform remove callback returning void

2025-06-04T12:42:18+00:00

[ Upstream commit 22ee670a8ad3ec7cd9d872d4512fe8797130e191 ] The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). To convert all those qcom pinctrl drivers, make msm_pinctrl_remove() return void (instead of zero) and use .remove_new in all drivers. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231009162510.335208-3-u.kleine-koenig@pengutronix.de Signed-off-by: Linus Walleij Stable-dep-of: 41e452e6933d ("pinctrl: qcom: switch to devm_register_sys_off_handler()") Signed-off-by: Sasha Levin