kernel/linux.git/drivers/pinctrl/qcom, branch v5.15.7

pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP

2021-12-08T08:04:38+00:00

[ Upstream commit 60430d4c4eddcdf8eac2bdbec9704f84a436eedf ] When PINCTRL_QCOM_SPMI_PMIC or PINCTRL_QCOM_SSBI_PMIC is selected, and GPIOLIB is not selected, Kbuild gives the following warnings: WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP Depends on [n]: GPIOLIB [=n] Selected by [y]: - PINCTRL_QCOM_SPMI_PMIC [=y] && PINCTRL [=y] && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && OF [=y] && SPMI [=y] WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP Depends on [n]: GPIOLIB [=n] Selected by [y]: - PINCTRL_QCOM_SSBI_PMIC [=y] && PINCTRL [=y] && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && OF [=y] This is because these config options enable GPIOLIB_IRQCHIP without selecting or depending on GPIOLIB, despite GPIOLIB_IRQCHIP depending on GPIOLIB. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha Link: https://lore.kernel.org/r/20211029004610.35131-1-julianbraha@gmail.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: qcom: sm8350: Correct UFS and SDC offsets

2021-11-25T08:48:41+00:00

[ Upstream commit 62209e805b5c68577602a5803a71d8e2e11ee0d3 ] The downstream TLMM binding covers a group of TLMM-related hardware blocks, but the upstream binding only captures the particular block related to controlling the TLMM pins from an OS. In the translation of the driver from downstream, the offset of 0x100000 was lost for the UFS and SDC pingroups. Fixes: d5d348a3271f ("pinctrl: qcom: Add SM8350 pinctrl driver") Signed-off-by: Bjorn Andersson Reviewed-by: Vinod Koul Reviewed-by: Vladimir Zapolskiy Link: https://lore.kernel.org/r/20211104170835.1993686-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: qcom: sdm845: Enable dual edge errata

2021-11-25T08:48:41+00:00

[ Upstream commit 3a3a100473d2f6ebf9bdfe6efedd7e18de724388 ] It has been observed that dual edge triggered wakeirq GPIOs on SDM845 doesn't trigger interrupts on the falling edge. Enabling wakeirq_dual_edge_errata for SDM845 indicates that the PDC in SDM845 suffers from the same problem described, and worked around, by Doug in 'c3c0c2e18d94 ("pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180")', so enable the workaround for SDM845 as well. The specific problem seen without this is that gpio-keys does not detect the falling edge of the LID gpio on the Lenovo Yoga C630 and as such consistently reports the LID as closed. Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Bjorn Andersson Tested-By: Steev Klimaszewski Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20211102034115.1946036-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2021-10-08T18:57:54+00:00

Pull asm-generic fixes from Arnd Bergmann: "There is one build fix for Arm platforms that ended up impacting most architectures because of the way the drivers/firmware Kconfig file is wired up: The CONFIG_QCOM_SCM dependency have caused a number of randconfig regressions over time, and some still remain in v5.15-rc4. The fix we agreed on in the end is to make this symbol selected by any driver using it, and then building it even for non-Arm platforms with CONFIG_COMPILE_TEST. To make this work on all architectures, the drivers/firmware/Kconfig file needs to be included for all architectures to make the symbol itself visible. In a separate discussion, we found that a sound driver patch that is pending for v5.16 needs the same change to include this Kconfig file, so the easiest solution seems to have my Kconfig rework included in v5.15. Finally, the branch also includes a small unrelated build fix for NOMMU architectures" Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/ Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/ Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/ * tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere qcom_scm: hide Kconfig symbol firmware: include drivers/firmware/Kconfig unconditionally

qcom_scm: hide Kconfig symbol

2021-10-07T14:51:57+00:00

Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo Acked-by: Alex Elder Signed-off-by: Arnd Bergmann

pinctrl: qcom: sc7280: Add PM suspend callbacks

2021-09-23T21:09:14+00:00

Use PM suspend callbacks from msm core, without this the hog_sleep pins don't change state in suspend. Signed-off-by: Rajendra Nayak Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/1632389487-11283-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Linus Walleij

pinctrl: qcom: spmi-gpio: correct parent irqspec translation

2021-09-16T23:06:44+00:00

pmic_gpio_child_to_parent_hwirq() and gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl- spmi-gpio irqspec to an SPMI controller irqspec. When they do this, they use a fixed SPMI slave ID of 0 and a fixed GPIO peripheral offset of 0xC0 (corresponding to SPMI address 0xC000). This translation results in an incorrect irqspec for secondary PMICs that don't have a slave ID of 0 as well as for PMIC chips which have GPIO peripherals located at a base address other than 0xC000. Correct this issue by passing the slave ID of the pinctrl-spmi- gpio device's parent in the SPMI controller irqspec and by calculating the peripheral ID base from the device tree 'reg' property of the pinctrl-spmi-gpio device. Signed-off-by: David Collins Signed-off-by: satya priya Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1631798498-10864-2-git-send-email-skakit@codeaurora.org Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2021-09-02T21:22:56+00:00

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ...

Merge tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2021-08-30T21:38:37+00:00

Pull irq updates from Thomas Gleixner: "Updates to the interrupt core and driver subsystems: Core changes: - The usual set of small fixes and improvements all over the place, but nothing stands out MSI changes: - Further consolidation of the PCI/MSI interrupt chip code - Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts of platform devices in the same way as PCI exposes them. Driver changes: - Support for ARM GICv3 EPPI partitions - Treewide conversion to generic_handle_domain_irq() for all chained interrupt controllers - Conversion to bitmap_zalloc() throughout the irq chip drivers - The usual set of small fixes and improvements" * tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) platform-msi: Add ABI to show msi_irqs of platform devices genirq/msi: Move MSI sysfs handling from PCI to MSI core genirq/cpuhotplug: Demote debug printk to KERN_DEBUG irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy irqdomain: Export irq_domain_disconnect_hierarchy() irqchip/gic-v3: Fix priority comparison when non-secure priorities are used irqchip/apple-aic: Fix irq_disable from within irq handlers pinctrl/rockchip: drop the gpio related codes gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type gpio/rockchip: support next version gpio controller gpio/rockchip: use struct rockchip_gpio_regs for gpio controller gpio/rockchip: add driver for rockchip gpio dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank pinctrl/rockchip: add pinctrl device to gpio bank struct pinctrl/rockchip: separate struct rockchip_pin_bank to a head file pinctrl/rockchip: always enable clock for gpio controller genirq: Fix kernel doc indentation EDAC/altera: Convert to generic_handle_domain_irq() powerpc: Bulk conversion to generic_handle_domain_irq() nios2: Bulk conversion to generic_handle_domain_irq() ...

pinctrl: Bulk conversion to generic_handle_domain_irq()

2021-08-12T10:39:39+00:00

Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Acked-by: Krzysztof Kozlowski Acked-by: Linus Walleij Signed-off-by: Marc Zyngier