kernel/linux.git/drivers/pinctrl/qcom, branch v4.14.85

pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant

2018-11-13T19:14:56+00:00

[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ] If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc21257 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-gpio has the same problem. Let's fix it there too. Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers") Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant

2018-11-13T19:14:55+00:00

[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ] If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc21257 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-mpp has the same problem. Let's fix it there too. NOTE: in case it's helpful to someone reading this, the way to tell whether to do the -EINVAL or not is to look at the PCONFDUMP for a given attribute. If the last element (has_arg) is false then you need to do the -EINVAL trick. ALSO NOTE: it seems unlikely that the values returned when we try to get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg" is false for that one, but I guess it's still fine to return different values so I kept doing that. It seems like another driver (ssbi-gpio) uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something similar so maybe a future change should do that here too. Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver") Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: spmi-mpp: Fix drive strength setting

2018-11-13T19:14:55+00:00

[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ] It looks like we parse the drive strength setting here, but never actually write it into the hardware to update it. Parse the setting and then write it at the end of the pinconf setting function so that it actually sticks in the hardware. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Cc: Doug Anderson Signed-off-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux

2018-11-13T19:14:55+00:00

[ Upstream commit 69f8455f6cc78fa6cdf80d0105d7a748106271dc ] 'ret' should be returned while pmic_mpp_write_mode_ctl fails. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Signed-off-by: YueHaibing Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant

2018-09-26T06:38:13+00:00

[ Upstream commit 1cf86bc21257a330e3af51f2a4e885f1a705f6a5 ] If you do this on an sdm845 board: grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups ...it looks like nonsense. For every pin you see listed: input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ... That's because pmic_gpio_config_get() isn't complying with the rules that pinconf_generic_dump_one() expects. Specifically for boolean parameters (anything with a "struct pin_config_item" where has_arg is false) the function expects that the function should return its value not through the "config" parameter but should return "0" if the value is set and "-EINVAL" if the value isn't set. Let's fix this. >From a quick sample of other pinctrl drivers, it appears to be tradition to also return 1 through the config parameter for these boolean parameters when they exist. I'm not one to knock tradition, so I'll follow tradition and return 1 in these cases. While I'm at it, I'll also continue searching for four leaf clovers, kocking on wood three times, and trying not to break mirrors. NOTE: This also fixes an apparent typo for reading PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally using "=" instead of "==" and thus was setting some internal state when you tried to query PIN_CONFIG_BIAS_DISABLE. Oops. Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Signed-off-by: Douglas Anderson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: msm: Fix msm_config_group_get() to be compliant

2018-09-26T06:38:13+00:00

[ Upstream commit 05e0c828955c1cab58dd71a04539442e5375d917 ] If you do this on an sdm845 board: cat /sys/kernel/debug/pinctrl/3400000.pinctrl/pinconf-groups ...it looks like nonsense. For every pin you see listed: input bias bus hold, input bias disabled, input bias pull down, input bias pull up That's because msm_config_group_get() isn't complying with the rules that pinconf_generic_dump_one() expects. Specifically for boolean parameters (anything with a "struct pin_config_item" where has_arg is false) the function expects that the function should return its value not through the "config" parameter but should return "0" if the value is set and "-EINVAL" if the value isn't set. Let's fix this. >From a quick sample of other pinctrl drivers, it appears to be tradition to also return 1 through the config parameter for these boolean parameters when they exist. I'm not one to knock tradition, so I'll follow tradition and return 1 in these cases. While I'm at it, I'll also continue searching for four leaf clovers, kocking on wood three times, and trying not to break mirrors. Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver") Signed-off-by: Douglas Anderson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "pinctrl: msm: Use dynamic GPIO numbering"

2018-06-05T09:41:55+00:00

This reverts commit bd36ea57d6d58041180c4f7d2c2bf5194c26845d which is commit a7aa75a2a7dba32594291a71c3704000a2fd7089 upstream. There's been too many complaints about this. Personally I think it's going to blow up when people hit this in mainline, but hey, it's not my systems. At least we don't have to backport the mess to the stable kernels to give them some more life to live unscathed :) Reported-by: Timur Tabi Reported-by: Sebastian Gottschall Cc: Bjorn Andersson Cc: Linus Walleij Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: msm: Use dynamic GPIO numbering

2018-05-30T05:52:41+00:00

[ Upstream commit a7aa75a2a7dba32594291a71c3704000a2fd7089 ] The base of the TLMM gpiochip should not be statically defined as 0, fix this to not artificially restrict the existence of multiple pinctrl-msm devices. Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver") Reported-by: Timur Tabi Signed-off-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

pinctrl: qcom: spmi-gpio: Correct power_source range check

2017-08-31T11:59:15+00:00

Power source selection in DIG_VIN_CTL is indexed from 0, in the range check it shouldn't be equal to the total number of power sources. Signed-off-by: Fenglin Wu Acked-by: Bjorn Andersson Signed-off-by: Linus Walleij