kernel/linux.git/drivers/pinctrl/meson, branch v6.1.168

pinctrl: meson: mark the GPIO controller as sleeping

2026-02-06T15:44:16+00:00

commit 28f24068387169722b508bba6b5257cb68b86e74 upstream. The GPIO controller is configured as non-sleeping but it uses generic pinctrl helpers which use a mutex for synchronization. This can cause the following lockdep splat with shared GPIOs enabled on boards which have multiple devices using the same GPIO: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 142, name: kworker/u25:3 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. irq event stamp: 46379 hardirqs last enabled at (46379): [] _raw_spin_unlock_irqrestore+0x74/0x78 hardirqs last disabled at (46378): [] _raw_spin_lock_irqsave+0x84/0x88 softirqs last enabled at (46330): [] handle_softirqs+0x4c4/0x4dc softirqs last disabled at (46295): [] __do_softirq+0x14/0x20 CPU: 1 UID: 0 PID: 142 Comm: kworker/u25:3 Tainted: G C 6.19.0-rc4-next-20260105+ #11963 PREEMPT Tainted: [C]=CRAP Hardware name: Khadas VIM3 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 __might_resched+0x144/0x248 __might_sleep+0x48/0x98 __mutex_lock+0x5c/0x894 mutex_lock_nested+0x24/0x30 pinctrl_get_device_gpio_range+0x44/0x128 pinctrl_gpio_set_config+0x40/0xdc gpiochip_generic_config+0x28/0x3c gpio_do_set_config+0xa8/0x194 gpiod_set_config+0x34/0xfc gpio_shared_proxy_set_config+0x6c/0xfc [gpio_shared_proxy] gpio_do_set_config+0xa8/0x194 gpiod_set_transitory+0x4c/0xf0 gpiod_configure_flags+0xa4/0x480 gpiod_find_and_request+0x1a0/0x574 gpiod_get_index+0x58/0x84 devm_gpiod_get_index+0x20/0xb4 devm_gpiod_get+0x18/0x24 mmc_pwrseq_emmc_probe+0x40/0xb8 platform_probe+0x5c/0xac really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0xdc/0x164 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x80/0xdc __device_attach+0xa8/0x1b0 Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Cc: stable@vger.kernel.org Reported-by: Marek Szyprowski Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/ Signed-off-by: Bartosz Golaszewski Reviewed-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: meson-gxl: add missing i2c_d pinmux

2025-10-15T09:56:26+00:00

[ Upstream commit d8c2a9edd181f0cc4a66eec954b3d8f6a1d954a7 ] Amlogic GXL has 4 I2C attached to gpio-periphs. I2C_D is on GPIOX_10/11. Add the relevant func 3 pinmux per the datasheet for S805X/S905X/S905D. Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by: Da Xue Link: https://lore.kernel.org/20250821233335.1707559-1-da@libre.computer Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: define the pull up/down resistor value as 60 kOhm

2025-06-04T12:40:18+00:00

[ Upstream commit e56088a13708757da68ad035269d69b93ac8c389 ] The public datasheets of the following Amlogic SoCs describe a typical resistor value for the built-in pull up/down resistor: - Meson8/8b/8m2: not documented - GXBB (S905): 60 kOhm - GXL (S905X): 60 kOhm - GXM (S912): 60 kOhm - G12B (S922X): 60 kOhm - SM1 (S905D3): 60 kOhm The public G12B and SM1 datasheets additionally state min and max values: - min value: 50 kOhm for both, pull-up and pull-down - max value for the pull-up: 70 kOhm - max value for the pull-down: 130 kOhm Use 60 kOhm in the pinctrl-meson driver as well so it's shown in the debugfs output. It may not be accurate for Meson8/8b/8m2 but in reality 60 kOhm is closer to the actual value than 1 Ohm. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/20250329190132.855196-1-martin.blumenstingl@googlemail.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl/meson: fix typo in PDM's pin name

2024-05-17T09:55:53+00:00

[ Upstream commit 368a90e651faeeb7049a876599cf2b0d74954796 ] Other pins have _a or _x suffix, but this one doesn't have any. Most likely this is a typo. Fixes: dabad1ff8561 ("pinctrl: meson: add pinctrl driver support for Meson-A1 SoC") Signed-off-by: Jan Dakinevich Reviewed-by: Neil Armstrong Message-ID: <20240325113058.248022-1-jan.dakinevich@salutedevices.com> Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson-axg: add missing GPIOA_18 gpio group

2023-06-14T09:15:28+00:00

commit 5b10ff013e8a57f8845615ac2cc37edf7f6eef05 upstream. Without this, the gpio cannot be explicitly mux'ed to its gpio function. Fixes: 83c566806a68a ("pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC") Cc: stable@vger.kernel.org Signed-off-by: Martin Hundebøll Reviewed-by: Neil Armstrong Reviewed-by: Dmitry Rokosov Link: https://lore.kernel.org/r/20230512064925.133516-1-martin@geanix.com Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: meson: Switch to use fwnode instead of of_node

2022-09-08T08:35:30+00:00

GPIO library now accepts fwnode as a firmware node, so switch the driver to use it. Signed-off-by: Andy Shevchenko Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20220905180034.73132-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij

Merge tag 'intel-gpio-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel

2022-05-04T21:15:21+00:00

intel-gpio for v5.19-1 * Introduce helpers to iterate over GPIO chip nodes and covert some drivers The following is an automated git shortlog grouped by driver: gpiolib: - Introduce a helper to get first GPIO controller node - Introduce gpiochip_node_count() helper - Introduce for_each_gpiochip_node() loop helper pinctrl: - meson: Replace custom code by gpiochip_node_count() call - meson: Enable COMPILE_TEST - meson: Rename REG_* to MESON_REG_* - armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register() - armada-37xx: Switch to use fwnode instead of of_node - samsung: Switch to use for_each_gpiochip_node() helper - samsung: Drop redundant node parameter in samsung_banks_of_node_get() - npcm7xx: Switch to use for_each_gpiochip_node() helper - renesas: rza1: Switch to use for_each_gpiochip_node() helper - renesas: rza1: Replace custom code by gpiochip_node_count() call - stm32: Switch to use for_each_gpiochip_node() helper - stm32: Replace custom code by gpiochip_node_count() call

pinctrl: meson: fix unused variable warning

2022-04-22T20:56:46+00:00

The kernel test robot reported a warning as below: >> drivers/pinctrl/meson/pinctrl-meson-s4.c:178:27: warning: unused variable 'tdm_sclk1_c_pins' [-Wunused-const-variable] static const unsigned int tdm_sclk1_c_pins[] = { GPIOC_3 }; Fix it by adding missing description about this pins Fixes: 775214d389c2 ("pinctrl: meson: add pinctrl driver support for Meson-S4 Soc") Reported-by: kernel test robot Signed-off-by: Qianggui Song Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20220330023720.18238-1-qianggui.song@amlogic.com Signed-off-by: Linus Walleij

pinctrl: meson: Replace custom code by gpiochip_node_count() call

2022-04-18T13:18:52+00:00

Since we have generic function to count GPIO controller nodes under a given device, there is no need to open code it. Replace custom code by gpiochip_node_count() call. Signed-off-by: Andy Shevchenko Tested-by: Marek Szyprowski Reviewed-by: Neil Armstrong

pinctrl: meson: Enable COMPILE_TEST

2022-04-18T13:18:52+00:00

Enable COMPILE_TEST for a better test coverage. Signed-off-by: Andy Shevchenko Tested-by: Marek Szyprowski Reviewed-by: Neil Armstrong