kernel/linux.git/drivers/pinctrl/meson, branch v4.19.112

pinctrl: meson-gxl: fix GPIOX sdio pins

2020-03-18T06:14:22+00:00

commit dc7a06b0dbbafac8623c2b7657e61362f2f479a7 upstream. In the gxl driver, the sdio cmd and clk pins are inverted. It has not caused any issue so far because devices using these pins always take both pins so the resulting configuration is OK. Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Reviewed-by: Jerome Brunet Signed-off-by: Nicolas Belin Link: https://lore.kernel.org/r/1582204512-7582-1-git-send-email-nbelin@baylibre.com Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: meson-gxl: remove invalid GPIOX tsin_a pins

2020-01-27T13:50:02+00:00

[ Upstream commit d801064cb871806e6843738ecad38993646f53f7 ] The GPIOX tsin_a pins wrongly uses the SDCard pinctrl bits, this patch completely removes these pins entries until we find out what are the correct bits and registers to be used instead. Fixes: 5a6ae9b80139 ("pinctrl: meson-gxl: add tsin_a pins") Signed-off-by: Neil Armstrong Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c

2019-10-07T16:57:00+00:00

[ Upstream commit cb0438e4436085d89706b5ccfce4d5da531253de ] Hi i tried to use the uart_C of the the odroid-c2. I enabled it in the dts file. During boot it crashed when the the sdcard slot is addressed. After long search in the net i found this: https://forum.odroid.com/viewtopic.php?f=139&t=25371&p=194370&hilit=uart_C#p177856 After changing the pin definitions accordingly erverything works. Uart_c is functioning and sdcard ist working. Fixes: 6db0f3a8a04e46 ("pinctrl: amlogic: gxbb: add more UART pins") Signed-off-by: Otto Meier Link: https://lore.kernel.org/r/1cc32a18-464d-5531-7a1c-084390e2ecb1@gmx.net Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins

2019-04-05T20:33:15+00:00

[ Upstream commit 6daae00243e622dd3feec7965bfe421ad6dd317e ] Gigabit Ethernet requires the Ethernet TXD0..3 and RXD0..3 data lines. Add the missing eth_rxd2 and eth_rxd3 definitions so we don't have to rely on the bootloader to set them up correctly. The vendor u-boot sources for Odroid-C1 use the following Ethernet pinmux configuration: SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f); SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000); This translates to the following pin groups in the mainline kernel: - register 6 bit 0: eth_rxd1 (DIF_0_P) - register 6 bit 1: eth_rxd0 (DIF_0_N) - register 6 bit 2: eth_rx_dv (DIF_1_P) - register 6 bit 3: eth_rx_clk (DIF_1_N) - register 6 bit 6: eth_tx_en (DIF_3_P) - register 6 bit 8: eth_ref_clk (DIF_3_N) - register 6 bit 9: eth_mdc (DIF_4_P) - register 6 bit 10: eth_mdio_en (DIF_4_N) - register 6 bit 11: eth_tx_clk (GPIOH_9) - register 6 bit 12: eth_txd2 (GPIOH_8) - register 6 bit 13: eth_txd3 (GPIOH_7) - register 7 bit 20: eth_txd0_0 (GPIOH_6) - register 7 bit 21: eth_txd1_0 (GPIOH_5) - register 7 bit 22: eth_rxd3 (DIF_2_P) - register 7 bit 23: eth_rxd2 (DIF_2_N) All functions except eth_rxd2 and eth_rxd3 are already supported by the pinctrl-meson8b driver. Suggested-by: Jianxin Pan Signed-off-by: Martin Blumenstingl Reviewed-by: Kevin Hilman Tested-by: Emiliano Ingrassia Reviewed-by: Emiliano Ingrassia Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins

2019-03-23T19:09:49+00:00

[ Upstream commit c17abcfa93bf0be5e48bb011607d237ac2bfc839 ] Fix the mismatch between the "sdxc_d13_1_a" pin group definition from meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a"). This makes it possible to use "sdxc_d13_1_a" in device-tree files to route the MMC data 1..3 pins to GPIOX_1..3. Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b") Signed-off-by: Martin Blumenstingl Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins

2019-02-12T18:47:16+00:00

[ Upstream commit 2b745ac3cceb8fc1d9985990c8241a821ea97e53 ] The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N) only belong to the pin controller in the AO domain. With the current definition these pins cannot be referred to in .dts files as group (which is possible on GXBB and GXL for example). Add a separate "gpio_aobus" function to fix the mapping between the pin controller and the GPIO pins in the AO domain. This is similar to how the GXBB and GXL drivers implement this functionality. Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration") Signed-off-by: Martin Blumenstingl Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins

2019-02-12T18:47:16+00:00

[ Upstream commit 42f9b48cc5402be11d2364275eb18c257d2a79e8 ] The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N) only belong to the pin controller in the AO domain. With the current definition these pins cannot be referred to in .dts files as group (which is possible on GXBB and GXL for example). Add a separate "gpio_aobus" function to fix the mapping between the pin controller and the GPIO pins in the AO domain. This is similar to how the GXBB and GXL drivers implement this functionality. Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration") Signed-off-by: Martin Blumenstingl Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: fix pull enable register calculation

2019-01-13T08:50:54+00:00

[ Upstream commit 614b1868a125a0ba24be08f3a7fa832ddcde6bca ] We just changed the code so we apply bias disable on the correct register but forgot to align the register calculation. The result is that we apply the change on the correct register, but possibly at the incorrect offset/bit This went undetected because offsets tends to be the same between REG_PULL and REG_PULLEN for a given pin the EE controller. This is not true for the AO controller. Fixes: e39f9dd8206a ("pinctrl: meson: fix pinconf bias disable") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: fix meson8b ao pull register bits

2018-12-01T08:37:31+00:00

[ Upstream commit a1705f02704cd8a24d434bfd0141ee8142ad277a ] AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 0fefcb6876d0 ("pinctrl: Add support for Meson8b") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: fix meson8 ao pull register bits

2018-12-01T08:37:31+00:00

[ Upstream commit e91b162d2868672d06010f34aa83d408db13d3c6 ] AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin