kernel/linux.git/drivers/pinctrl/meson, branch v4.11.5

pinctrl: meson-gxbb: Fix typo in i2c ao groups

2017-03-23T09:10:38+00:00

Signed-off-by: Neil Armstrong Signed-off-by: Linus Walleij

Merge tag 'v4.10-rc6' into devel

2017-01-30T13:39:20+00:00

Linux 4.10-rc6 Resolved conflicts in: drivers/pinctrl/pinctrl-amd.c drivers/pinctrl/samsung/pinctrl-exynos.c

pinctrl: meson: meson-gxl: add the pwm_ao_b pin

2017-01-26T14:40:46+00:00

This adds support for the pwm_ao_b pin. Unfortunately the registers for the pwm_ao pins are not documented at all. The source for the pwm_ao_b pin from this patch is the Khadas VIM GPL kernel source, which sets bit 3 and unsets bits 4 and 31 to enable the PWM LEDs. Signed-off-by: Martin Blumenstingl Acked-by: Kevin Hilman Signed-off-by: Linus Walleij

Merge branch 'ib-pinctrl-genprops' into devel

2017-01-26T14:27:54+00:00

pinctrl: Widen the generic pinconf argument from 16 to 24 bits

2017-01-26T14:22:32+00:00

The current pinconf packed format allows only 16-bit argument limiting the maximum value 65535. For most types this is enough. However, debounce time can be in range of hundreths of milliseconds in case of mechanical switches so we cannot represent the worst case using the current format. In order to support larger values change the packed format so that the lower 8 bits are used as type which leaves 24 bits for the argument. This allows representing values up to 16777215 and debounce times up to 16 seconds. We also convert the existing users to use 32-bit integer when extracting argument from the packed configuration value. Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij

pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM

2017-01-19T09:36:25+00:00

The GXBB and GXL/GXM pinctrl drivers had a configuration which conflicts with uart_ao_a. According to the GXBB ("S905") datasheet the AO UART functions are: - GPIOAO_0: Func1 = UART_TX_AO_A (bit 12), Func2 = UART_TX_AO_B (bit 26) - GPIOAO_1: Func1 = UART_RX_AO_A (bit 11), Func2 = UART_RX_AO_B (bit 25) - GPIOAO_4: Func2 = UART_TX_AO_B (bit 24) - GPIOAO_5: Func2 = UART_RX_AO_B (bit 25) The existing definition for uart_AO_A already uses GPIOAO_0 and GPIOAO_1. The old definition of uart_AO_B however was broken, as it used GPIOAO_0 for TX (which would be fine) and two pins (GPIOAO_1 and GPIOAO_5) for RX (which does not make any sense). This fixes the uart_AO_B configuration by moving it to GPIOAO_4 and GPIOAO_5 (it would be possible to use GPIOAO_0 and GPIOAO_1 in theory, but all existing hardware uses uart_AO_A there). The fix for GXBB and GXL/GXM is identical since it seems that these specific pins are identical on both SoC variants. Signed-off-by: Martin Blumenstingl Reviewed-by: Kevin Hilman Signed-off-by: Linus Walleij

pinctrl: meson: Add HDMI HPD/DDC pins functions

2017-01-18T12:27:30+00:00

Add pinctrl functions for HDMI HPD pin and DDC pins on Amlogic Meson GXL and GXBB SoCs. Signed-off-by: Neil Armstrong Signed-off-by: Linus Walleij

pinctrl: meson: fix gpio request disabling other modes

2016-12-29T20:04:45+00:00

The pinctrl_gpio_request is called with the "full" gpio number, already containing the base, then meson_pmx_request_gpio is then called with the final pin number. Remove the base addition when calling meson_pmx_disable_other_groups. Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") CC: Beniamino Galvani Signed-off-by: Neil Armstrong Acked-by: Kevin Hilman Acked-by: Beniamino Galvani Signed-off-by: Linus Walleij

pinctrl: meson: Add GXL pinctrl definitions

2016-11-04T22:05:06+00:00

Add support for the Amlogic Meson GXL SoC, this is a partially complete definition only based on the Amlogic Vendor tree. This definition differs a lot from the GXBB and needs a separate entry. Acked-by: Rob Herring Signed-off-by: Neil Armstrong Acked-by: Kevin Hilman Signed-off-by: Linus Walleij

Merge tag 'v4.8-rc6' into devel

2016-09-23T12:57:16+00:00

Linux 4.8-rc6