kernel/linux.git/drivers/pinctrl/meson, branch linux-4.20.y

pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins

2019-02-12T19:02:27+00:00

[ Upstream commit 2b745ac3cceb8fc1d9985990c8241a821ea97e53 ] The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N) only belong to the pin controller in the AO domain. With the current definition these pins cannot be referred to in .dts files as group (which is possible on GXBB and GXL for example). Add a separate "gpio_aobus" function to fix the mapping between the pin controller and the GPIO pins in the AO domain. This is similar to how the GXBB and GXL drivers implement this functionality. Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration") Signed-off-by: Martin Blumenstingl Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins

2019-02-12T19:02:26+00:00

[ Upstream commit 42f9b48cc5402be11d2364275eb18c257d2a79e8 ] The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N) only belong to the pin controller in the AO domain. With the current definition these pins cannot be referred to in .dts files as group (which is possible on GXBB and GXL for example). Add a separate "gpio_aobus" function to fix the mapping between the pin controller and the GPIO pins in the AO domain. This is similar to how the GXBB and GXL drivers implement this functionality. Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration") Signed-off-by: Martin Blumenstingl Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: meson: fix pull enable register calculation

2018-11-19T14:40:55+00:00

We just changed the code so we apply bias disable on the correct register but forgot to align the register calculation. The result is that we apply the change on the correct register, but possibly at the incorrect offset/bit This went undetected because offsets tends to be the same between REG_PULL and REG_PULLEN for a given pin the EE controller. This is not true for the AO controller. Fixes: e39f9dd8206a ("pinctrl: meson: fix pinconf bias disable") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Linus Walleij

pinctrl: meson: fix meson8b ao pull register bits

2018-11-05T08:33:22+00:00

AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 0fefcb6876d0 ("pinctrl: Add support for Meson8b") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij

pinctrl: meson: fix meson8 ao pull register bits

2018-11-05T08:33:22+00:00

AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij

pinctrl: meson: fix gxl ao pull register bits

2018-11-05T08:33:22+00:00

AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij

pinctrl: meson: fix gxbb ao pull register bits

2018-11-05T08:33:22+00:00

AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij

pinctrl: meson: fix pinconf bias disable

2018-11-05T08:33:22+00:00

If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set() with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will force a pull-down bias on the pin. Instead of the pull type register bank, the driver should access the pull enable register bank. Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Linus Walleij

pinctrl: Include nothing else

2018-09-14T13:10:57+00:00

These drivers are GPIO drivers, and the do not need to use the legacy header in , go directly for instead. Replace any use of GPIOF_* with 0/1, these flags are for consumers, not drivers. Get rid of a few gpio_to_irq() users that was littering around the place, use local callbacks or avoid using it at all. Signed-off-by: Linus Walleij

pinctrl: Convert to using %pOFn instead of device_node.name

2018-08-29T12:05:36+00:00

In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij Cc: Dong Aisheng Cc: Fabio Estevam Cc: Shawn Guo Cc: Stefan Agner Cc: Pengutronix Kernel Team Cc: Sean Wang Cc: Matthias Brugger Cc: Carlo Caione Cc: Kevin Hilman Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Cc: Sebastian Hesselbarth Cc: Jean-Christophe Plagniol-Villard Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Heiko Stuebner Cc: Tony Lindgren Cc: Haojian Zhuang Cc: Patrice Chotard Cc: Barry Song Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng Reviewed-by: Alexandre Belloni Acked-by: Tony Lindgren Acked-by: Sean Wang Acked-by: Chen-Yu Tsai Acked-by: Heiko Stuebner Signed-off-by: Rob Herring Signed-off-by: Linus Walleij