kernel/linux.git/drivers/pinctrl/intel, branch v4.14.85

Revert "pinctrl: intel: Initialize GPIO properly when used through irqchip"

2018-04-29T09:33:09+00:00

This reverts commit f5a26acf0162477af6ee4c11b4fb9cffe5d3e257 Mike writes: It seems that commit f5a26acf0162 ("pinctrl: intel: Initialize GPIO properly when used through irqchip") can cause problems on some Skylake systems with Sunrisepoint PCH-H. Namely on certain systems it may turn the backlight PWM pin from native mode to GPIO which makes the screen blank during boot. There is more information here: https://bugzilla.redhat.com/show_bug.cgi?id=1543769 The actual reason is that GPIO numbering used in BIOS is using "Windows" numbers meaning that they don't match the hardware 1:1 and because of this a wrong pin (backlight PWM) is picked and switched to GPIO mode. There is a proper fix for this but since it has quite many dependencies on commits that cannot be considered stable material, I suggest we revert commit f5a26acf0162 from stable trees 4.9, 4.14 and 4.15 to prevent the backlight issue. Reported-by: Mika Westerberg Fixes: f5a26acf0162 ("pinctrl: intel: Initialize GPIO properly when used through irqchip") Cc: Daniel Drake Cc: Chris Chiu Cc: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts

2018-04-12T10:32:16+00:00

[ Upstream commit 9291c65b01d1c67ebd56644cb19317ad665c44b3 ] On some systems, some PCB traces attached to GpioInts are routed in such a way that they pick up enough interference to constantly (many times per second) trigger. Enabling glitch-filtering fixes this. Signed-off-by: Hans de Goede Acked-by: Mika Westerberg Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: denverton: Fix UART2 RTS pin mode

2018-02-25T10:07:55+00:00

[ Upstream commit 4bd6683da2e64590bdc27ecf7e61ad8376861768 ] UART2 RTS is mode 2 of the pin. Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

pinctrl: intel: Initialize GPIO properly when used through irqchip

2018-02-16T19:23:08+00:00

commit f5a26acf0162477af6ee4c11b4fb9cffe5d3e257 upstream. When a GPIO is requested using gpiod_get_* APIs the intel pinctrl driver switches the pin to GPIO mode and makes sure interrupts are routed to the GPIO hardware instead of IOAPIC. However, if the GPIO is used directly through irqchip, as is the case with many I2C-HID devices where I2C core automatically configures interrupt for the device, the pin is not initialized as GPIO. Instead we rely that the BIOS configures the pin accordingly which seems not to be the case at least in Asus X540NA SKU3 with Focaltech touchpad. When the pin is not properly configured it might result weird behaviour like interrupts suddenly stop firing completely and the touchpad stops responding to user input. Fix this by properly initializing the pin to GPIO mode also when it is used directly through irqchip. Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Reported-by: Daniel Drake Reported-and-tested-by: Chris Chiu Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: cherryview: Mask all interrupts on Intel_Strago based systems

2017-12-29T16:53:48+00:00

commit d2b3c353595a855794f8b9df5b5bdbe8deb0c413 upstream. Guenter Roeck reported an interrupt storm on a prototype system which is based on Cyan Chromebook. The root cause turned out to be a incorrectly configured pin that triggers spurious interrupts. This will be fixed in coreboot but currently we need to prevent the interrupt storm from happening by masking all interrupts (but not GPEs) on those systems. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Fixes: bcb48cca23ec ("pinctrl: cherryview: Do not mask all interrupts in probe") Reported-and-tested-by: Guenter Roeck Reported-by: Dmitry Torokhov Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

pinctrl: cherryview: fix issues caused by dynamic gpio irqs mapping

2017-10-08T00:32:59+00:00

New GPIO IRQs are allocated and mapped dynamically by default when GPIO IRQ infrastructure is used by cherryview-pinctrl driver. This causes issues on some Intel platforms [1][2] with broken BIOS which hardcodes Linux IRQ numbers in their ACPI tables. On such platforms cherryview-pinctrl driver should allocate and map all GPIO IRQs at probe time. Side effect - "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n" can be seen at boot log. NOTE. It still may fail if boot sequence will changed and some interrupt controller will be probed before cherryview-pinctrl which will shift Linux IRQ numbering (expected with CONFIG_SPARCE_IRQ enabled). [1] https://bugzilla.kernel.org/show_bug.cgi?id=194945 [2] https://lkml.org/lkml/2017/9/28/153 Cc: Andy Shevchenko Cc: Chris Gorman Cc: Mika Westerberg Cc: Heikki Krogerus Signed-off-by: Grygorii Strashko Reported-by: Chris Gorman Reported-by: Mika Westerberg Tested-by: Chris Gorman Acked-by: Mika Westerberg Signed-off-by: Linus Walleij

pinctrl: intel: Read back TX buffer state

2017-08-31T13:34:31+00:00

In the same way as it's done in pinctrl-cherryview.c we would provide a readback TX buffer state. Fixes: 17fab473693 ("pinctrl: intel: Set pin direction properly") Reported-by: "Bourque, Francis" Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Tested-by: "Bourque, Francis" Signed-off-by: Linus Walleij

pinctrl: intel: Decrease indentation in intel_gpio_set()

2017-08-31T12:46:36+00:00

Decrease indentation in intel_gpio_set() to make it looking slightly better and be in align with intel_gpio_get(). Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Linus Walleij

pinctrl: intel: Add Intel Lewisburg GPIO support

2017-08-22T13:42:19+00:00

Intel Lewisburg has the same GPIO hardware than Intel Sunrisepoint-H except few differences in register offsets and pin lists. Because of this we add a separate pinctrl driver for Lewisburg. Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij