kernel/linux.git/drivers/pinctrl/freescale, branch v5.6.17

pinctrl: imx: scu: Align imx sc msg structs to 4

2020-02-21T15:33:27+00:00

The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: b96eea718bf6 ("pinctrl: fsl: add scu based pinctrl support") Signed-off-by: Leonard Crestez Link: https://lore.kernel.org/r/bd7ad5fd755739a6d8d5f4f65e03b3ca4f457bd2.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2020-01-29T17:51:36+00:00

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes, nothing too exciting about this. Some changes hit arch/sh and arch/arm but are well isolated and acknowledged by the respective arch maintainers. Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema (a first user of this)" * tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: madera: Remove extra blank line pinctrl: qcom: Don't lock around irq_set_irq_wake() pinctrl: mvebu: armada-37xx: use use platform api gpio: Drop the chained IRQ handler assign function pinctrl: freescale: Add i.MX8MP pinctrl driver support dt-bindings: imx: Add pinctrl binding doc for i.MX8MP pinctrl: tigerlake: Tiger Lake uses _HID enumeration pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID pinctrl: iproc: Use platform_get_irq_optional() to avoid error message pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema pinctrl: intel: Pass irqchip when adding gpiochip pinctrl: intel: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins pinctrl: sunrisepoint: Add missing Interrupt Status register offset pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: artpec6: fix __iomem on reg in set pinctrl: ingenic: Use devm_platform_ioremap_resource() pinctrl: ingenic: Factorize irq_set_type function pinctrl: ingenic: Remove duplicated ingenic_chip_info structures ...

pinctrl: freescale: Add i.MX8MP pinctrl driver support

2020-01-23T14:49:39+00:00

Add the pinctrl driver support for i.MX8MP. Signed-off-by: Anson Huang Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/1579052348-32167-2-git-send-email-Anson.Huang@nxp.com Reviewed-by: Fabio Estevam Signed-off-by: Linus Walleij

remove ioremap_nocache and devm_ioremap_nocache

2020-01-06T08:45:59+00:00

ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig Acked-by: Arnd Bergmann

pinctrl: Fix Kconfig indentation

2019-11-21T14:06:07+00:00

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/1574306382-32516-1-git-send-email-krzk@kernel.org Signed-off-by: Linus Walleij

pinctrl: freescale: imx: Add of_node_put() before return

2019-08-10T08:29:19+00:00

Each iteration of for_each_child_of_node() puts the previous node; however, in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence put of_node_put() statements as required before two mid-loop return statements. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta Link: https://lore.kernel.org/r/20190808074720.15754-1-nishkadg.linux@gmail.com Reviewed-by: Philipp Zabel Signed-off-by: Linus Walleij

pinctrl: freescale: mxs: Add of_node_put() before return

2019-08-06T12:52:24+00:00

Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in three places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta Link: https://lore.kernel.org/r/20190804160420.5309-1-nishkadg.linux@gmail.com Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2019-07-13T22:02:27+00:00

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...

pinctrl: freescale: Add i.MX8MN pinctrl driver support

2019-06-25T08:40:23+00:00

Add the pinctrl driver support for i.MX8MN. Signed-off-by: Anson Huang Acked-by: Dong Aisheng Signed-off-by: Linus Walleij

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman