kernel/linux.git/drivers/pinctrl/bcm, branch linux-5.9.y

pinctrl: bcm: fix kconfig dependency warning when !GPIOLIB

2020-10-29T09:11:10+00:00

[ Upstream commit 513034d8b089b9a49dab57845aee70e830fe7334 ] When PINCTRL_BCM2835 is enabled and GPIOLIB is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP Depends on [n]: GPIOLIB [=n] Selected by [y]: - PINCTRL_BCM2835 [=y] && PINCTRL [=y] && OF [=y] && (ARCH_BCM2835 [=n] || ARCH_BRCMSTB [=n] || COMPILE_TEST [=y]) The reason is that PINCTRL_BCM2835 selects GPIOLIB_IRQCHIP without depending on or selecting GPIOLIB while GPIOLIB_IRQCHIP is subordinate to GPIOLIB. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: 85ae9e512f43 ("pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP") Signed-off-by: Necip Fazil Yildiran Link: https://lore.kernel.org/r/20200914144025.371370-1-fazilyildiran@gmail.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

pinctrl: bcm: pinctrl-iproc-gpio: Rename incorrectly documented function param

2020-07-16T13:12:38+00:00

Fixes the following W=1 kernel build warning(s): drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Function parameter or member 'chip' not described in 'iproc_set_bit' drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Excess function parameter 'iproc_gpio' description in 'iproc_set_bit' Signed-off-by: Lee Jones Acked-by: Scott Branden Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Link: https://lore.kernel.org/r/20200713144930.1034632-5-lee.jones@linaro.org Signed-off-by: Linus Walleij

pinctrl: bcm: pinctrl-bcm281xx: Demote obvious misuse of kerneldoc to standard comment blocks

2020-07-16T13:12:38+00:00

There has been little to no attempt to document any of the demoted structures here. These are obviously not kerneldoc headers. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/bcm/pinctrl-bcm281xx.c:65: warning: cannot understand function prototype: 'enum bcm281xx_pin_type ' drivers/pinctrl/bcm/pinctrl-bcm281xx.c:79: warning: cannot understand function prototype: 'struct bcm281xx_pin_function ' drivers/pinctrl/bcm/pinctrl-bcm281xx.c:89: warning: cannot understand function prototype: 'struct bcm281xx_pinctrl_data ' Signed-off-by: Lee Jones Acked-by: Scott Branden Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: YueHaibing Link: https://lore.kernel.org/r/20200713144930.1034632-4-lee.jones@linaro.org Signed-off-by: Linus Walleij

pinctrl: nsp: Set irq handler based on trig type

2020-07-11T21:09:12+00:00

Rather than always using handle_simple_irq() as the gpio_irq_chip handler, set a more appropriate handler based on the IRQ trigger type requested. This is important for level triggered interrupts which need to be masked during handling. Also, fix the interrupt acknowledge so that it clears only one interrupt instead of all interrupts which are currently active. Finally there is no need to clear the interrupt during the interrupt handler, since the edge-triggered handler will do that for us. Signed-off-by: Mark Tomlinson Reviewed-by: Ray Jui Link: https://lore.kernel.org/r/20200703011830.15655-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Linus Walleij

pinctrl: bcm2835: Add support for wake-up interrupts

2020-06-03T12:16:38+00:00

Leverage the IRQCHIP_MASK_ON_SUSPEND flag in order to avoid having to specifically treat the GPIO interrupts during suspend and resume, and simply implement an irq_set_wake() callback that is responsible for enabling the parent wake-up interrupt as a wake-up interrupt. To avoid allocating unnecessary resources for other chips, the wake-up interrupts are only initialized if we have a brcm,bcm7211-gpio compatibility string. Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20200531001101.24945-5-f.fainelli@gmail.com Signed-off-by: Linus Walleij

pinctrl: bcm2835: Match BCM7211 compatible string

2020-06-03T12:16:38+00:00

The BCM7211 SoC uses the same pinconf_ops as the ones defined for the BCM2711 SoC, match the compatible string and use the correct set of options. Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20200531001101.24945-4-f.fainelli@gmail.com Signed-off-by: Linus Walleij

pinctrl: Fix return value about devm_platform_ioremap_resource()

2020-05-25T11:40:47+00:00

When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 4b024225c4a8 ("pinctrl: use devm_platform_ioremap_resource() to simplify code") Signed-off-by: Tiezhu Yang Link: https://lore.kernel.org/r/1590234326-2194-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Linus Walleij

pinctrl: Use new GPIO_LINE_DIRECTION

2020-02-21T14:19:42+00:00

Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0. Main benefit is to make it easier to see which values mean IN and which OUT. As a side effect this helps GPIO framework to change the direction defines to something else if ever needed. Please note that return value from get_direction call on pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have returned value 2 for direction INPUT. Signed-off-by: Matti Vaittinen Reported-by: kbuild test robot Reviewed-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven Reviewed-by: Bjorn Andersson Reviewed-by: Jacopo Mondi Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain Signed-off-by: Linus Walleij

pinctrl: bcm2835: Add support for all GPIOs on BCM2711

2020-02-14T10:49:28+00:00

The BCM2711 supports 58 GPIOs. So extend pinctrl and GPIOs accordingly. Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/1581166975-22949-4-git-send-email-stefan.wahren@i2se.com Reviewed-by: Nicolas Saenz Julienne Signed-off-by: Linus Walleij

pinctrl: bcm2835: Refactor platform data

2020-02-14T10:48:11+00:00

This prepares the platform data to be easier to extend for more GPIOs. Except of this there is no functional change. Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/1581166975-22949-3-git-send-email-stefan.wahren@i2se.com Reviewed-by: Nicolas Saenz Julienne Signed-off-by: Linus Walleij