kernel/linux.git/drivers/pinctrl/Makefile, branch v5.15.7

pinctrl: Add Intel Keem Bay pinctrl driver

2021-08-11T13:13:14+00:00

About Intel Keem Bay: ------------------- Intel Keem Bay is a computer vision AI accelerator SoC based on ARM CPU. Documentation of Keem Bay: Documentation/vpu/vpu-stack-overview.rst. Pinctrl IP: ---------- The SoC has a customised pinmux controller IP which controls pin multiplexing and configuration. Keem Bay pinctrl IP is not based on and have nothing in common with the existing pinctrl drivers. The registers used are incompatible with the existing drivers, so it requires a new driver. Add pinctrl driver to enable pin control support in the Intel Keem Bay SoC. Co-developed-by: Vineetha G. Jaya Kumaran Signed-off-by: Vineetha G. Jaya Kumaran Co-developed-by: Vijayakannan Ayyathurai Signed-off-by: Vijayakannan Ayyathurai Signed-off-by: Lakshmi Sowjanya D Reviewed-by: Mark Gross Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20210806142527.29113-3-lakshmi.sowjanya.d@intel.com Signed-off-by: Linus Walleij

pinctrl: Add Xilinx ZynqMP pinctrl driver support

2021-04-22T09:13:04+00:00

Adding pinctrl driver for Xilinx ZynqMP platform. This driver queries pin information from firmware and registers pin control accordingly. Signed-off-by: Sai Krishna Potthuri Link: https://lore.kernel.org/r/1619080202-31924-4-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com Signed-off-by: Linus Walleij

Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

2021-02-26T18:28:35+00:00

Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...

pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver

2021-02-19T07:18:01+00:00

Add the pinctrl-k210.c pinctrl driver for the Canaan Kendryte K210 field programmable IO array (FPIOA) to allow configuring the SoC pin functions. The K210 has 48 programmable pins which can take any of 256 possible functions. This patch is inspired from the k210 pinctrl driver for the u-boot project and contains many direct contributions from Sean Anderson. The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210 SOC FPIOA DRIVER" with myself listed as maintainer for this driver. Cc: Linus Walleij Cc: linux-gpio@vger.kernel.org Signed-off-by: Sean Anderson Signed-off-by: Damien Le Moal Reviewed-by: Linus Walleij Signed-off-by: Palmer Dabbelt

pinctrl: remove ste u300 driver

2021-01-21T08:53:51+00:00

The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210120132045.2127659-6-arnd@kernel.org Signed-off-by: Linus Walleij

pinctrl: remove coh901 driver

2021-01-21T08:53:40+00:00

pinctrl: remove sirf atlas/prima drivers

2021-01-21T08:53:26+00:00

The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song Signed-off-by: Arnd Bergmann Acked-by: Barry Song Link: https://lore.kernel.org/r/20210120132045.2127659-4-arnd@kernel.org Signed-off-by: Linus Walleij

pinctrl: remove zte zx driver

2021-01-21T08:53:15+00:00

The zte zx platform is getting removed, so this driver is no longer needed. Cc: Jun Nie Cc: Shawn Guo Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210120132045.2127659-3-arnd@kernel.org Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2020-12-16T23:02:49+00:00

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.11 kernel. Drivers, drivers and drivers. Not a single core change. Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot SoCs. As part of the modularization attempt, I applied one patch affecting the firmware subsystem as a functional (not syntactic/semantic) dependency and then it blew up in our face, so I had to revert it, bummer. It will come in later, through that subsystem, I guess. New drivers: - New driver for the Microchip Serial GPIO "SGPIO". - Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver. New subdrivers: - Intel Lakefield subdriver. - Intel Elkhart Lake subdriver. - Intel Alder Lake-S subdriver. - Qualcomm MSM8953 subdriver. - Qualcomm SDX55 subdriver. - Qualcomm SDX55 PMIC subdriver. - Ocelot Luton SoC subdriver. - Ocelot Serval SoC subdriver. Modularization: - The Meson driver can now be built as modules. - The Qualcomm driver(s) can now be built as modules. Incremental improvements: - The Intel driver now supports pin configuration for GPIO-related configurations. - A bunch of Renesas PFC drivers have been augmented with support for QSPI pins, groups and functions. - Non-critical fixes to the irq handling in the Allwinner Sunxi driver" * tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl/spear: simplify the return expression of spear300_pinctrl_probe() pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1() dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5) pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings pinctrl: qcom-pmic-gpio: Add support for pmx55 dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error pinctrl: mtk: Fix low level output voltage issue pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe() pinctrl: actions: pinctrl-s500: Constify s500_padinfo[] pinctrl: pinctrl-microchip-sgpio: Add OF config dependency pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver pinctrl: at91-pio4: add support for fewer lines on last PIO bank pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller ...

pinctrl: ralink: add a pinctrl driver for the rt2880 family

2020-12-08T08:58:01+00:00

These Socs have 1-3 banks of 8-32 gpios. Rather then setting the muxing of each pin individually, these socs have mux groups that when set will effect 1-N pins. Pin groups have a 2, 4 or 8 different muxes. Acked-by: Linus Walleij Signed-off-by: Sergio Paracuellos Link: https://lore.kernel.org/r/20201208075523.7060-3-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman