kernel/linux.git/drivers/phy, branch v4.19.77

phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current

2019-09-21T05:16:42+00:00

commit e6839c31a608e79f2057fab987dd814f5d3477e6 upstream. The hardware manual should be revised, but the initial value of VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically when the hardware detects over-current signal from a USB power switch. However, since the hardware doesn't have any registers which indicates over-current, the driver cannot handle it at all. So, if "is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS register is cleared automatically, the channel cannot be used after that. To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0 to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware detects over-current. (We assume a USB power switch itself protects over-current and turns the VBUS off.) This patch is inspired by a BSP patch from Kazuya Mizuguchi. Fixes: 1114e2d31731 ("phy: rcar-gen3-usb2: change the mode to OTG on the combined channel") Cc: # v4.5+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: renesas: rcar-gen2: Fix memory leak at error paths

2019-07-31T05:27:00+00:00

[ Upstream commit d4a36e82924d3305a17ac987a510f3902df5a4b2 ] This patch fixes memory leak at error paths of the probe function. In for_each_child_of_node, if the loop returns, the driver should call of_put_node() before returns. Reported-by: Julia Lawall Fixes: 1233f59f745b237 ("phy: Renesas R-Car Gen2 PHY driver") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: mapphone-mdm6600: add gpiolib dependency

2019-05-31T13:46:20+00:00

[ Upstream commit 208d3423ee463ab257908456f6bbca4024ab63f7 ] gcc points out that when CONFIG_GPIOLIB is disabled, gpiod_get_array_value_cansleep() returns 0 but fails to set its output: drivers/phy/motorola/phy-mapphone-mdm6600.c: In function 'phy_mdm6600_status': drivers/phy/motorola/phy-mapphone-mdm6600.c:220:24: error: 'values[0]' is used uninitialized in this function [-Werror=uninitialized] This could be fixed more generally in gpiolib by returning a failure code, but for this specific case, the easier workaround is to add a gpiolib dependency. Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Signed-off-by: Arnd Bergmann Acked-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode

2019-05-31T13:46:20+00:00

[ Upstream commit e6f32efb1b128344a2c7df9875bc1a1abaa1d395 ] On platforms where the MUSB and HCI controllers share PHY0, PHY passby is required when using the HCI controller with the PHY, but it must be disabled when the MUSB controller is used instead. Without this, PHY0 passby is always enabled, which results in broken peripheral mode on such platforms (e.g. H3/H5). Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy") Signed-off-by: Paul Kocialkowski Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: ti-pipe3: fix missing bit-wise or operator when assigning val

2019-05-25T16:23:27+00:00

commit e6577cb5103b7ca7c0204c0c86ef4af8aa6288f6 upstream. There seems to be a missing bit-wise or operator when setting val, fix this by adding it in. Fixes: 2796ceb0c18a ("phy: ti-pipe3: Update pcie phy settings") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Colin Ian King Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs

2019-04-03T04:26:27+00:00

commit 1396929e8a903db80425343cacca766a18ad6409 upstream. While only the first PHY supports mode switching, the remaining PHYs work in USB host mode. They should support set_mode with mode=USB_HOST instead of failing. This is especially needed now that the USB core does set_mode for all USB ports, which was added in commit b97a31348379 ("usb: core: comply to PHY framework"). Make set_mode with mode=USB_HOST a no-op instead of failing for the non-OTG USB PHYs. Fixes: 6ba43c291961 ("phy-sun4i-usb: Add support for phy_set_mode") Signed-off-by: Chen-Yu Tsai Cc: stable Signed-off-by: Greg Kroah-Hartman

phy: ath79-usb: Fix the main reset name to match the DT binding

2019-03-05T16:58:48+00:00

[ Upstream commit 827cb0323928952c0db9515aba9d534fb1285b3f ] I submitted this driver several times before it got accepted. The first series hasn't been accepted but the DTS binding did made it. I then made a second series that added generic reset support to the PHY core, this in turn required a change to the DT binding. This second series seemed to have been ignored, so I did a third one without the change to the PHY core and the DT binding update, and this last attempt finally made it. But two months later the DT binding update from the second series has been integrated too. So now the driver doesn't match the binding and the only DTS using it. This patch fix the driver to match the new binding. Signed-off-by: Alban Bedel Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: ath79-usb: Fix the power on error path

2019-03-05T16:58:48+00:00

[ Upstream commit 009808154c69c48d5b41fc8cf5ad5ab5704efd8f ] In the power on function the error path doesn't return the suspend override to its proper state. It should should deassert this reset line to enable the suspend override. Signed-off-by: Alban Bedel Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: sun4i-usb: add support for missing USB PHY index

2019-02-12T18:47:09+00:00

[ Upstream commit 2659392e5c08dff626e6db1d739adff58a94604d ] The new Allwinner H6 SoC's USB2 PHY has two holes -- USB1 (which is a 3.0 port with dedicated PHY) and USB2 (which doesn't exist at all). Add support for this kind of missing USB PHY index. Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845

2018-12-17T08:24:34+00:00

[ Upstream commit c88520db18ba0b9a41326c3b8680e7c09eb4c381 ] Tune1 register on sdm845 is used to update HSTX_TRIM with fused setting. Enable same by specifying update_tune1_with_efuse flag for sdm845, otherwise driver ends up programming tune2 register. Fixes: ef17f6e212ca ("phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845") Signed-off-by: Manu Gautam Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd Acked-by: Vivek Gautam Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin