kernel/linux.git/drivers/phy/ti, branch v5.7.4

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-04-01T00:29:33+00:00

Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ...

phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phy

2020-03-27T03:01:13+00:00

The phy-gmii-sel can be only auto selected in Kconfig and now the pretty complex Kconfig dependencies are defined for phy-gmii-sel driver, which also need to be updated every time phy-gmii-sel is re-used for any new networking driver. Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all dependencies and from networking drivers and rely on using 'imply PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead. Signed-off-by: Grygorii Strashko Acked-by: Kishon Vijay Abraham I Tested-by: Murali Karicheri Tested-by: Peter Ujfalusi Signed-off-by: David S. Miller

Merge tag 'phy-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2020-03-21T11:02:20+00:00

Kishon writes: phy: for 5.7 *) Rename and Re-design phy-cadence-dp driver to phy-cadence-torrent driver *) Add new PHY driver for Qualcomm 28nm Hi-Speed USB PHY *) Add new PHY driver for Qualcomm Super Speed PHY in QCS404 *) Add support for Qualcomm PCIe QMP/QHP PHY in SDM845 to phy-qcom-qmp driver *) Add support for Qualcomm UFS PHY in MSM8996 to phy-qcom-qmp driver *) Add support for an additional reference clock in Mediatek phy-mtk-tphy driver *) Add support for configuring tuning parameters in Mediatek phy-mtk-tphy driver *) Add support for GMII PHY in TI K3 AM654x/J721E SoCs to phy-gmii-sel driver *) Add support for USB2 PHY in Amlogic A1 SoC Family to phy-meson-g12a-usb2 driver *) Add support for USB3/USB2/PCIe PHY in Socionext Pro5 SoC to phy-uniphier-usb3ss/phy-uniphier-usb3hs/phy-uniphier-pcie driver respectively *) Add support for QUSB2 PHY in Qualcomm SC7180 in driver *) Convert dt-bindings of Cadence DP, Qualcomm QUSB2 to YAML format Signed-off-by: Kishon Vijay Abraham I * tag 'phy-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (52 commits) phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters phy: qcom-qusb2: Add generic QUSB2 V2 PHY support dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180 dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml phy: rk-inno-usb2: Decrease verbosity of repeating log. phy: amlogic: Add Amlogic A1 USB2 PHY Driver dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings phy: ti: gmii-sel: add support for am654x/j721e soc dt-bindings: phy: ti: gmii-sel: add support for am654x/j721e soc phy: qualcomm: usb: Add SuperSpeed PHY driver dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding dt-bindings: phy: remove qcom-dwc3-usb-phy phy: phy-mtk-tphy: add a new reference clock phy: phy-mtk-tphy: remove unused u3phya_ref clock phy: phy-mtk-tphy: make the ref clock optional phy: phy-mtk-tphy: add a property for internal resistance ...

phy: ti: gmii-sel: add support for am654x/j721e soc

2020-03-20T14:04:29+00:00

TI AM654x/J721E SoCs have the same PHY interface selection mechanism for CPSWx subsystem as TI SoCs (AM3/4/5/DRA7), but registers and bit-fields placement is different. This patch adds corresponding support for TI AM654x/J721E SoCs PHY interface selection. Signed-off-by: Grygorii Strashko Signed-off-by: Kishon Vijay Abraham I

phy: ti: gmii-sel: do not fail in case of gmii

2020-02-20T12:36:57+00:00

The "gmii" PHY interface mode is supported on TI AM335x/437x/5xx SoCs, so don't fail if it's selected. Signed-off-by: Grygorii Strashko Signed-off-by: Kishon Vijay Abraham I

phy: ti: gmii-sel: fix set of copy-paste errors

2020-02-20T12:36:57+00:00

- under PHY_INTERFACE_MODE_MII the 'mode' func parameter is assigned instead of 'gmii_sel_mode' and it's working only because the default value 'gmii_sel_mode' is set to 0. - console outputs use 'rgmii_id' and 'mode' values to print PHY mode instead of using 'submode' value which is representing PHY interface mode now. This patch fixes above two cases. Signed-off-by: Grygorii Strashko Signed-off-by: Kishon Vijay Abraham I

phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS

2020-01-17T23:05:30+00:00

If CONFIG_OF_ADDRESS is not set and COMPILE_TEST=y, the following error is seen while building phy-j721e-wiz.c drivers/phy/ti/phy-j721e-wiz.o: In function `wiz_remove': phy-j721e-wiz.c:(.text+0x1a): undefined reference to `of_platform_device_destroy' Fix the config dependency for PHY_J721E_WIZ here. Reported-by: Hulk Robot Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Hongbo Yao Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20200117212310.2864-1-kishon@ti.com Signed-off-by: Greg Kroah-Hartman

phy: ti: j721e-wiz: Fix return value check in wiz_probe()

2020-01-17T05:24:03+00:00

In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Wei Yongjun Signed-off-by: Kishon Vijay Abraham I

phy: ti: j721e-wiz: Manage typec-gpio-dir

2020-01-14T05:20:19+00:00

Based on this GPIO state we need to configure LN10 bit to swap lane0 and lane1 if required (flipped connector). Type-C companions typically need some time after the cable is plugged before and before they reflect the correct status of Type-C plug orientation on the DIR line. Type-C Spec specifies CC attachment debounce time (tCCDebounce) of 100 ms (min) to 200 ms (max). Use the DT property to figure out if we need to add delay or not before sampling the Type-C DIR line. Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Reviewed-by: Jyri Sarha Signed-off-by: Kishon Vijay Abraham I

phy: Enable compile testing for some of drivers

2020-01-14T05:20:19+00:00

Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski Acked-by: Florian Fainelli Signed-off-by: Kishon Vijay Abraham I