kernel/linux.git/drivers/phy/ti/Kconfig, branch v6.12.80

phy: ti: fix Kconfig warning and operator precedence

2023-01-11T07:54:33+00:00

Fix Kconfig depends operator precedence to prevent a Kconfig warning: WARNING: unmet direct dependencies detected for MUX_MMIO Depends on [n]: MULTIPLEXER [=m] && OF [=n] Selected by [m]: - PHY_AM654_SERDES [=m] && (OF [=n] && ARCH_K3 || COMPILE_TEST [=y]) && COMMON_CLK [=y] Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Randy Dunlap Cc: Vinod Koul Cc: Kishon Vijay Abraham I Cc: linux-phy@lists.infradead.org Cc: Arnd Bergmann Link: https://lore.kernel.org/r/20230110062529.22668-1-rdunlap@infradead.org Signed-off-by: Vinod Koul

phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phy

2020-03-27T03:01:13+00:00

The phy-gmii-sel can be only auto selected in Kconfig and now the pretty complex Kconfig dependencies are defined for phy-gmii-sel driver, which also need to be updated every time phy-gmii-sel is re-used for any new networking driver. Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all dependencies and from networking drivers and rely on using 'imply PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead. Signed-off-by: Grygorii Strashko Acked-by: Kishon Vijay Abraham I Tested-by: Murali Karicheri Tested-by: Peter Ujfalusi Signed-off-by: David S. Miller

phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS

2020-01-17T23:05:30+00:00

If CONFIG_OF_ADDRESS is not set and COMPILE_TEST=y, the following error is seen while building phy-j721e-wiz.c drivers/phy/ti/phy-j721e-wiz.o: In function `wiz_remove': phy-j721e-wiz.c:(.text+0x1a): undefined reference to `of_platform_device_destroy' Fix the config dependency for PHY_J721E_WIZ here. Reported-by: Hulk Robot Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Hongbo Yao Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20200117212310.2864-1-kishon@ti.com Signed-off-by: Greg Kroah-Hartman

phy: Enable compile testing for some of drivers

2020-01-14T05:20:19+00:00

Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski Acked-by: Florian Fainelli Signed-off-by: Kishon Vijay Abraham I

phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC

2020-01-14T05:20:19+00:00

Add support for WIZ module present in TI's J721E SoC. WIZ is a SERDES wrapper used to configure some of the input signals to the SERDES. It is used with both Sierra(16G) and Torrent(10G) SERDES. This driver configures three clock selects (pll0, pll1, dig), two divider clocks and supports resets for each of the lanes. [jsarha@ti.com: Add support for Torrent(10G) SERDES wrapper] Signed-off-by: Jyri Sarha Signed-off-by: Kishon Vijay Abraham I

phy: ti: phy-gmii-sel: dependency from ti cpsw-switchdev driver

2019-11-20T19:25:24+00:00

Add dependency from TI_CPSW_SWITCHDEV. Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-05-08T17:03:52+00:00

Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ...

phy: ti: Add a new SERDES driver for TI's AM654x SoC

2019-04-17T08:43:19+00:00

Add a new SERDES driver for TI's AM654x SoC which configures the SERDES only for PCIe. Support fo USB3 will be added later. SERDES in am654x has three input clocks (left input, externel reference clock and right input) and two output clocks (left output and right output) in addition to a PLL mux clock which the SERDES uses for Clock Multiplier Unit (CMU refclock). The PLL mux clock can select from one of the three input clocks. The right output can select between left input and external reference clock while the left output can select between the right input and external reference clock. The driver has support to select PLL mux and left/right output mux as specified in device tree. [rogerq@ti.com: Fix boot lockup caused by accessing a structure member (hw->init) allocated in stack of probe() and accessed in get_parent] [rogerq@ti.com: Fix "Failed to find the parent" warnings] Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I

phy: ti: usb2: fix OMAP_CONTROL_PHY dependency

2019-04-17T06:36:02+00:00

With randconfig build testing on arm64, we can run into a configuration that has CONFIG_OMAP_CONTROL_PHY=m and CONFIG_OMAP_USB2=y, which in turn causes a link failure: drivers/phy/ti/phy-omap-usb2.o: In function `omap_usb_phy_power': phy-omap-usb2.c:(.text+0x17c): undefined reference to `omap_control_phy_power' I could not come up with a good way to correctly describe the relation of the two symbols, but if we just select CONFIG_OMAP_CONTROL_PHY during compile testing, we can no longer run into the broken configuration. Fixes: 6777cee3a872 ("phy: ti: usb2: Add support for AM654 USB2 PHY") Signed-off-by: Arnd Bergmann Signed-off-by: Kishon Vijay Abraham I