kernel/linux.git/drivers/phy/renesas, branch v6.6.132

phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()

2026-01-11T14:21:27+00:00

[ Upstream commit 662bb179d3381c7c069e44bb177396bcaee31cc8 ] If an error occurs after the reset_control_deassert(), reset_control_assert() must be called, as already done in the remove function. Use devm_add_action_or_reset() to add the missing call and simplify the .remove() function accordingly. While at it, drop struct rcar_gen3_chan::rstc as it is not used aymore. [claudiu.beznea: removed "struct reset_control *rstc = data;" from rcar_gen3_reset_assert(), dropped struct rcar_gen3_chan::rstc] Fixes: 4eae16375357 ("phy: renesas: rcar-gen3-usb2: Add support to initialize the bus") Signed-off-by: Christophe JAILLET Reviewed-by: Biju Das Reviewed-by: Geert Uytterhoeven Tested-by: Wolfram Sang Signed-off-by: Claudiu Beznea Link: https://patch.msgid.link/20251023135810.1688415-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet

2025-11-24T09:29:36+00:00

[ Upstream commit e4a8db93b5ec9bca1cc66b295544899e3afd5e86 ] R-Car S4-8 datasheet Rev.1.20 describes some additional register settings at the end of the initialization. Signed-off-by: Michael Dege Link: https://lore.kernel.org/r/20250703-renesas-serdes-update-v4-2-1db5629cac2b@renesas.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off

2025-06-04T12:41:52+00:00

[ Upstream commit 9ce71e85b29eb63e48e294479742e670513f03a0 ] Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data

2025-06-04T12:41:52+00:00

[ Upstream commit 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 ] The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Stable-dep-of: 9ce71e85b29e ("phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off") Signed-off-by: Sasha Levin

phy: renesas: rcar-gen3-usb2: Move IRQ request in probe

2025-06-04T12:41:52+00:00

[ Upstream commit de76809f60cc938d3580bbbd5b04b7d12af6ce3a ] Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration to init") moved the IRQ request operation from probe to struct phy_ops::phy_init API to avoid triggering interrupts (which lead to register accesses) while the PHY clocks (enabled through runtime PM APIs) are not active. If this happens, it results in a synchronous abort. One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which calls free_irq() on driver removal. Move the IRQ request and free operations back to probe, and take the runtime PM state into account in IRQ handler. This commit is preparatory for the subsequent fixes in this series. Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Stable-dep-of: 9ce71e85b29e ("phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off") Signed-off-by: Sasha Levin

phy: renesas: rcar-gen3-usb2: Add support to initialize the bus

2025-06-04T12:41:51+00:00

[ Upstream commit 4eae16375357a2a7e8501be5469532f7636064b3 ] The Renesas RZ/G3S need to initialize the USB BUS before transferring data due to hardware limitation. As the register that need to be touched for this is in the address space of the USB PHY, and the UBS PHY need to be initialized before any other USB drivers handling data transfer, add support to initialize the USB BUS. As the USB PHY is probed before any other USB drivers that enables clocks and de-assert the reset signals and the BUS initialization is done in the probe phase, we need to add code to de-assert reset signal and runtime resume the device (which enables its clocks) before accessing the registers. As the reset signals are not required by the USB PHY driver for the other USB PHY hardware variants, the reset signals and runtime PM was handled only in the function that initialize the USB BUS. The PHY initialization was done right after runtime PM enable to have all in place when the PHYs are registered. Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20240822152801.602318-11-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Stable-dep-of: 9ce71e85b29e ("phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off") Signed-off-by: Sasha Levin

phy: renesas: rcar-gen3-usb2: Set timing registers only once

2025-05-22T12:12:22+00:00

commit 86e70849f4b2b4597ac9f7c7931f2a363774be25 upstream. phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common to all PHYs. There is no need to set them every time a PHY is initialized. Set timing register only when the 1st PHY is initialized. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind

2025-05-22T12:12:22+00:00

commit 54c4c58713aaff76c2422ff5750e557ab3b100d7 upstream. It has been observed on the Renesas RZ/G3S SoC that unbinding and binding the PHY driver leads to role autodetection failures. This issue occurs when PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt associated with the USB2_INT_ENABLE register (as rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called to initialize OTG without enabling PHY interrupts. To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in role_store(), role_show(), and rcar_gen3_init_otg(). At the same time, rcar_gen3_init_otg() is only called when initialization for a PHY with interrupt bits is in progress. As a result, the struct rcar_gen3_phy::otg_initialized is no longer needed. Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Reviewed-by: Lad Prabhakar Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

phy: renesas: rcar-gen3-usb2: Fix returning wrong error code

2024-02-16T18:10:42+00:00

[ Upstream commit 249abaf3bf0dd07f5ddebbb2fe2e8f4d675f074e ] Even if device_create_file() returns error code, rcar_gen3_phy_usb2_probe() will return zero because the "ret" is variable shadowing. Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202312161021.gOLDl48K-lkp@intel.com/ Fixes: 441a681b8843 ("phy: rcar-gen3-usb2: fix implementation for runtime PM") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20240105093703.3359949-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: Explicitly include correct DT includes

2023-07-17T06:22:56+00:00

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring Acked-by: Marc Kleine-Budde # for drivers/phy/phy-can-transceiver.c Acked-by: Heiko Stuebner Acked-by: Sergio Paracuellos Link: https://lore.kernel.org/r/20230714174841.4061919-1-robh@kernel.org Signed-off-by: Vinod Koul