kernel/linux.git/drivers/phy/renesas, branch v4.19.112

phy: renesas: rcar-gen3-usb2: Fix sysfs interface of "role"

2019-12-17T19:34:45+00:00

commit 4bd5ead82d4b877ebe41daf95f28cda53205b039 upstream. Since the role_store() uses strncmp(), it's possible to refer out-of-memory if the sysfs data size is smaller than strlen("host"). This patch fixes it by using sysfs_streq() instead of strncmp(). Reported-by: Pavel Machek Fixes: 9bb86777fb71 ("phy: rcar-gen3-usb2: add sysfs for usb role swap") Cc: # v4.10+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Acked-by: Pavel Machek Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs

2019-11-20T17:47:24+00:00

[ Upstream commit 09938ea9d136243e8d1fed6d4d7a257764f28f6d ] This patch fixes and issue that the vbus_ctrl is disabled by rcar_gen3_init_from_a_peri_to_a_host(), so a usb host cannot supply the vbus. Note that this condition will exit when the otg irq happens even if we don't apply this patch. Fixes: 9bb86777fb71 ("phy: rcar-gen3-usb2: add sysfs for usb role swap") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current

2019-09-21T05:16:42+00:00

commit e6839c31a608e79f2057fab987dd814f5d3477e6 upstream. The hardware manual should be revised, but the initial value of VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically when the hardware detects over-current signal from a USB power switch. However, since the hardware doesn't have any registers which indicates over-current, the driver cannot handle it at all. So, if "is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS register is cleared automatically, the channel cannot be used after that. To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0 to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware detects over-current. (We assume a USB power switch itself protects over-current and turns the VBUS off.) This patch is inspired by a BSP patch from Kazuya Mizuguchi. Fixes: 1114e2d31731 ("phy: rcar-gen3-usb2: change the mode to OTG on the combined channel") Cc: # v4.5+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: renesas: rcar-gen2: Fix memory leak at error paths

2019-07-31T05:27:00+00:00

[ Upstream commit d4a36e82924d3305a17ac987a510f3902df5a4b2 ] This patch fixes memory leak at error paths of the probe function. In for_each_child_of_node, if the loop returns, the driver should call of_put_node() before returns. Reported-by: Julia Lawall Fixes: 1233f59f745b237 ("phy: Renesas R-Car Gen2 PHY driver") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: Renesas R-Car gen3 PCIe PHY driver

2018-07-10T08:15:11+00:00

This PHY is still mostly undocumented -- the only documented registers exist on R-Car V3H (R8A77980) SoC where this PHY stays in a powered-down state after a reset and thus we must power it up for PCIe to work... Signed-off-by: Sergei Shtylyov Reviewed-by: Simon Horman Signed-off-by: Kishon Vijay Abraham I

phy: rcar-gen3-usb2: Add support for r8a77965

2018-03-16T11:25:26+00:00

This patch adds support for r8a77965 (R-Car M3-N). This SoC has dedicated pins. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Signed-off-by: Kishon Vijay Abraham I

phy: rcar-gen3-usb2: select USB_COMMON

2017-12-15T10:30:41+00:00

When USB is disabled, we get a link error for this driver because of the added OTG support drivers/phy/renesas/phy-rcar-gen3-usb2.o: In function `rcar_gen3_phy_usb2_probe': phy-rcar-gen3-usb2.c:(.text+0x250): undefined reference to `of_usb_get_dr_mode_by_phy' Other phy drivers select USB_COMMON for this, so let's do the same here. Fixes: 7e0540f41332 ("phy: rcar-gen3-usb2: check dr_mode for otg mode") Signed-off-by: Arnd Bergmann Acked-by: Yoshihiro Shimoda Signed-off-by: Kishon Vijay Abraham I

Merge tag 'extcon-next-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into usb-next

2017-10-27T10:36:06+00:00

Chanwoo writes: Update extcon for 4.15 Detailed description for this pull request: 1. Split out extcon header file for consumer and provider device : The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device. - include/linux/extcon-provider.h includes API for the provider device driver. - include/linux/extcon.h includes the API for the consumer device driver. 2. Support the SmartDock accessory on extcon-max77843.c device driver - Support the SmartDock accessory which detects following connectors at the same time. : USB host throught USB hub for mouse, keyboard and so on. : MHL connector for video output. : Charger connector for battery charging. - It tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. 3. Fix the minor issue of extcon driver - Delete the unneeded initialization in extcon-max14577. - Make extcon_info static const in order to fix the warning.

phy: rcar-gen3-usb2: add SoC-specific parameter for dedicated pins

2017-10-23T05:49:26+00:00

This patch adds SoC-specific parameter to avoid reading/writing specific registers wrongly if this driver runs on a SoC which doesn't have dedicated pins (e.g. R-Car D3). This patch also changes the value "has_otg" to "has_otg_pins" for slightly easier reading of the code. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Signed-off-by: Kishon Vijay Abraham I

phy: rcar-gen3-usb2: use enum phy_mode in the role_store()

2017-10-23T05:49:26+00:00

This patch modifies the role_store() to use "enum phy_mode" instead of the local "bool" for host/device mode selection. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Signed-off-by: Kishon Vijay Abraham I