kernel/linux.git/drivers/phy/qualcomm, branch v4.19.112

phy: qualcomm: Adjust indentation in read_poll_timeout

2020-02-11T12:34:12+00:00

commit a89806c998ee123bb9c0f18526e55afd12c0c0ab upstream. Clang warns: ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:83:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); ^ ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:80:3: note: previous statement is here if (readl_relaxed(addr) & mask) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 1de990d8a169 ("phy: qcom: Add driver for QCOM APQ8064 SATA PHY") Link: https://github.com/ClangBuiltLinux/linux/issues/816 Signed-off-by: Nathan Chancellor Reviewed-by: Bjorn Andersson Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

phy: qcom-qmp: Increase PHY ready timeout

2020-02-01T09:37:07+00:00

[ Upstream commit cd217ee6867d285ceecd610fa1006975d5c683fa ] It's typical for the QHP PHY to take slightly above 1ms to initialize, so increase the timeout of the PHY ready check to 10ms - as already done in the downstream PCIe driver. Signed-off-by: Bjorn Andersson Tested-by: Evan Green Tested-by: Vinod Koul Signed-off-by: Vinod Koul Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: qcom-qusb2: fix missing assignment of ret when calling clk_prepare_enable

2020-01-27T13:50:52+00:00

[ Upstream commit d98010817a26eba8d4d1e8a639e0b7d7f042308a ] The error return from the call to clk_prepare_enable is not being assigned to variable ret even though ret is being used to check if the call failed. Fix this by adding in the missing assignment. Addresses-Coverity: ("Logically dead code") Fixes: 891a96f65ac3 ("phy: qcom-qusb2: Add support for runtime PM") Signed-off-by: Colin Ian King Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: qcom-usb-hs: Fix extcon double register after power cycle

2019-12-31T15:35:30+00:00

[ Upstream commit 64f86b9978449ff05bfa6c64b4c5439e21e9c80b ] Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") switched from extcon_register_notifier() to the resource-managed API, i.e. devm_extcon_register_notifier(). This is problematic in this case, because the extcon notifier is dynamically registered/unregistered whenever the PHY is powered on/off. The resource-managed API does not unregister the notifier until the driver is removed, so as soon as the PHY is power cycled, attempting to register the notifier again results in: double register detected WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0 Call trace: ... extcon_register_notifier+0x74/0xb8 devm_extcon_register_notifier+0x54/0xb8 qcom_usb_hs_phy_power_on+0x1fc/0x208 ... ... and USB stops working after plugging the cable out and in another time. The easiest way to fix this is to make a partial revert of commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") and avoid using the resource-managed API in this case. Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") Signed-off-by: Stephan Gerhold Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: ath79-usb: Fix the main reset name to match the DT binding

2019-03-05T16:58:48+00:00

[ Upstream commit 827cb0323928952c0db9515aba9d534fb1285b3f ] I submitted this driver several times before it got accepted. The first series hasn't been accepted but the DTS binding did made it. I then made a second series that added generic reset support to the PHY core, this in turn required a change to the DT binding. This second series seemed to have been ignored, so I did a third one without the change to the PHY core and the DT binding update, and this last attempt finally made it. But two months later the DT binding update from the second series has been integrated too. So now the driver doesn't match the binding and the only DTS using it. This patch fix the driver to match the new binding. Signed-off-by: Alban Bedel Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: ath79-usb: Fix the power on error path

2019-03-05T16:58:48+00:00

[ Upstream commit 009808154c69c48d5b41fc8cf5ad5ab5704efd8f ] In the power on function the error path doesn't return the suspend override to its proper state. It should should deassert this reset line to enable the suspend override. Signed-off-by: Alban Bedel Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845

2018-12-17T08:24:34+00:00

[ Upstream commit c88520db18ba0b9a41326c3b8680e7c09eb4c381 ] Tune1 register on sdm845 is used to update HSTX_TRIM with fused setting. Enable same by specifying update_tune1_with_efuse flag for sdm845, otherwise driver ends up programming tune2 register. Fixes: ef17f6e212ca ("phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845") Signed-off-by: Manu Gautam Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd Acked-by: Vivek Gautam Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: qcom-qusb2: Use HSTX_TRIM fused value as is

2018-12-17T08:24:33+00:00

[ Upstream commit 6e34d358b24ffc40764eb3681164c79091765429 ] Fix HSTX_TRIM tuning logic which instead of using fused value as HSTX_TRIM, incorrectly performs bitwise OR operation with existing default value. Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") Signed-off-by: Manu Gautam Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd Acked-by: Vivek Gautam Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: qcom-usb-hs: Mark expected switch fall-through

2018-07-10T08:15:11+00:00

In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Kishon Vijay Abraham I

phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845

2018-05-20T16:21:33+00:00

There are two QUSB2 PHYs present on sdm845. In order to improve eye diagram for both the PHYs some parameters need to be changed. Provide device tree properties to override these from board specific device tree files. Signed-off-by: Manu Gautam Reviewed-by: Douglas Anderson Signed-off-by: Kishon Vijay Abraham I