kernel/linux.git/drivers/phy/qualcomm, branch linux-5.11.y

Merge tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

2020-12-09T13:26:40+00:00

Vinod writes: phy-for-5.11 - New phy drivers: - Mediatek MT7621 PCIe PHY (promoted from staging) - Ingenic USB phy driver supporting JZ4775 and X2000 - Intel Keem Bay USB PHY driver - Marvell USB HSIC PHY driver supporting MMP3 SoC - AXG MIPI D-PHY driver - Updates: - Conversion to YAML binding for: - Broadcom SATA PHY - Cadence Sierra PHY bindings - STM32 USBC Phy - Support for Exynos5433 PCIe PHY - Support for Qualcomm SM8250 PCIe QMP PHY - Support for Exynos5420 USB2 phy - devm_platform_ioremap_resource conversion for bunch of drivers * tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) drm/mediatek: avoid dereferencing a null hdmi_phy on an error message phy: ingenic: depend on HAS_IOMEM phy: mediatek: statify mtk_hdmi_phy_driver dt-bindings: phy: Convert Broadcom SATA PHY to YAML devicetree: phy: rockchip-emmc add output-tapdelay-select phy: rockchip-emmc: output tap delay dt property PHY: Ingenic: Add USB PHY driver using generic PHY framework. dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000. USB: PHY: JZ4770: Remove unnecessary function calls. devicetree: phy: rockchip-emmc: pulldown property phy: rockchip: set pulldown for strobe line in dts phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure phy: mediatek: allow compile-testing the hdmi phy phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build error phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250 phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macro phy: ralink: phy-mt7621-pci: drop 'COMPILE_TEST' from Kconfig phy: mediatek: Make PHY_MTK_{XSPHY, TPHY} depend on HAS_IOMEM and OF_ADDRESS to fix build errors phy: tegra: xusb: Fix usb_phy device driver field phy: amlogic: replace devm_reset_control_array_get() ...

phy: qualcomm: Fix 28 nm Hi-Speed USB PHY OF dependency

2020-11-16T07:50:38+00:00

This Kconfig entry should declare a dependency on OF Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver") Signed-off-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20201113151225.1657600-3-bryan.odonoghue@linaro.org Signed-off-by: Vinod Koul

phy: qualcomm: usb: Fix SuperSpeed PHY OF dependency

2020-11-16T07:50:38+00:00

This Kconfig entry should declare a dependency on OF Fixes: 6076967a500c ("phy: qualcomm: usb: Add SuperSpeed PHY driver") Reported-by: kernel test robot Link: https://lkml.org/lkml/2020/11/13/414 Signed-off-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20201113151225.1657600-2-bryan.odonoghue@linaro.org Signed-off-by: Vinod Koul

phy: qualcomm: convert to devm_platform_ioremap_resource(_byname)

2020-11-16T07:17:47+00:00

Use devm_platform_ioremap_resource(_byname) to simplify code Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1604642930-29019-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul

phy: qcom-qmp: Add SM8250 PCIe QMP PHYs

2020-11-16T05:58:01+00:00

SM8250 has multiple different PHY versions: QMP GEN3x1 PHY - 1 lane QMP GEN3x2 PHY - 2 lanes QMP Modem PHY - 2 lanes Add support for these with relevant init sequence. In order to abstract the init sequence, this commit introduces secondary tables which can be used to factor out the unique sequence for each PHY while the former tables can have the common sequence. Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20201027170033.8475-3-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul

phy: qcom-qmp: Initialize another pointer to NULL

2020-10-28T16:17:50+00:00

This probe function is too complicated and should be refactored. For now let's just set this variable to NULL and keep the static analysis tools happy. Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy") Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20201026205942.2861828-1-swboyd@chromium.org Signed-off-by: Vinod Koul

Merge tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next

2020-10-02T11:45:00+00:00

Vinod writes: phy for 5.9 - Core: - New PHY attribute for max_link_rate - New phy drivers: - Rockchip dphy driver moved from staging - Socionext UniPhier AHCI PHY driver - Intel LGM SoC USB phy - Intel Keem Bay eMMC PHY driver - Updates: - Support for imx8mp usb phy - Support for DP Phy and USB3+DP combo phy in QMP driver - Support for Qualcomm sc7180 DP phy - Support for cadence torrent PCIe and USB single linke and multilink configurations along with USB, SGMII/QSGMII configurations * tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) phy: qcom-qmp: initialize the pointer to NULL phy: qcom-qmp: Add support for sc7180 DP phy phy: qcom-qmp: Add support for DP in USB3+DP combo phy phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify phy: qcom-qmp: Get dp_com I/O resource by index phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy' phy: qcom-qmp: Remove 'initialized' in favor of 'init_count' phy: qcom-qmp: Move phy mode into struct qmp_phy dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information dt-bindings: phy: ti,phy-j721e-wiz: fix bindings for torrent phy dt-bindings: phy: cdns,torrent-phy: add reset-names phy: rockchip-dphy-rx0: Include linux/delay.h phy: fix USB_LGM_PHY warning & build errors phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configuration phy: cadence-torrent: Add PCIe + USB multilink configuration phy: cadence-torrent: Add single link USB register sequences phy: cadence-torrent: Add single link SGMII/QSGMII register sequences phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals phy: cadence-torrent: Add PHY link configuration sequences for single link phy: cadence-torrent: Add clk changes for multilink configuration ...

phy: qcom-qmp: initialize the pointer to NULL

2020-10-01T07:36:40+00:00

Smatch complains: drivers/phy/qualcomm/phy-qcom-qmp.c:3899 qcom_qmp_phy_probe() error: uninitialized symbol 'dp_cfg'. drivers/phy/qualcomm/phy-qcom-qmp.c:3900 qcom_qmp_phy_probe() error: uninitialized symbol 'dp_serdes'. drivers/phy/qualcomm/phy-qcom-qmp.c:3902 qcom_qmp_phy_probe() error: uninitialized symbol 'usb_cfg'. This is a warning but not a practical one as dp_cfg, dp_serdes and usb_cfg will be set and used when valid. So we can set the pointers to NULL to quiesce the warnings. Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy") Reported-by: kernel test robot Reported-by: Dan Carpenter Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20201001070911.140019-1-vkoul@kernel.org Signed-off-by: Vinod Koul

phy: qcom-qmp: Add support for sc7180 DP phy

2020-09-28T05:57:53+00:00

Add the necessary compatible strings and phy data for the sc7180 USB3+DP combo phy. Signed-off-by: Stephen Boyd Cc: Jeykumar Sankaran Cc: Chandan Uddaraju Cc: Vara Reddy Cc: Tanmay Shah Cc: Bjorn Andersson Cc: Manu Gautam Cc: Sandeep Maheswaram Cc: Douglas Anderson Cc: Sean Paul Cc: Jonathan Marek Cc: Dmitry Baryshkov Cc: Rob Clark Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org Link: https://lore.kernel.org/r/20200916231202.3637932-9-swboyd@chromium.org Signed-off-by: Vinod Koul

phy: qcom-qmp: Add support for DP in USB3+DP combo phy

2020-09-28T05:57:53+00:00

Add support for the USB3 + DisplayPort (DP) "combo" phy to the qmp phy driver. We already have support for the USB3 part of the combo phy, so most additions are for the DP phy. Split up the qcom_qmp_phy{enable,disable}() functions into the phy init, power on, power off, and exit functions that the common phy framework expects so that the DP phy can add even more phy ops like phy_calibrate() and phy_configure(). This allows us to initialize the DP PHY and configure the AUX channel before powering on the PHY at the link rate that was negotiated during link training. The general design is as follows: 1) DP controller calls phy_init() to initialize the PHY and configure the dp_com register region. 2) DP controller calls phy_configure() to tune the link rate and voltage swing and pre-emphasis settings. 3) DP controller calls phy_power_on() to enable the PLL and power on the phy. 4) DP controller calls phy_configure() again to tune the voltage swing and pre-emphasis settings determind during link training. 5) DP controller calls phy_calibrate() some number of times to change the aux settings if the aux channel times out during link training. 6) DP controller calls phy_power_off() if the link rate is to be changed and goes back to step 2 to try again at a different link rate. 5) DP controller calls phy_power_off() and then phy_exit() to power down the PHY when it is done. The DP PHY contains a PLL that is different from the one used for the USB3 PHY. Instead of a pipe clk there is a link clk and a pixel clk output from the DP PLL after going through various dividers. Introduce clk ops for these two clks that just tell the child clks what the frequency of the pixel and link are. When the phy link rate is configured we call clk_set_rate() to update the child clks in the display clk controller on what rate is in use. The clk frequencies always differ based on the link rate (i.e. 1.6Gb/s 2.7Gb/s, 5.4Gb/s, or 8.1Gb/s corresponding to various transmission modes like HBR1, HBR2 or HBR3) so we simply store the link rate and use that to calculate the clk frequencies. The PLL enable sequence is a little different from other QMP phy PLLs so we power on the PLL in qcom_qmp_phy_configure_dp_phy() that gets called from phy_power_on(). This should probably be split out better so that each phy has a way to run the final PLL/PHY enable sequence. This code is based on a submission of this phy and PLL in the drm subsystem. Signed-off-by: Stephen Boyd Cc: Jeykumar Sankaran Cc: Chandan Uddaraju Cc: Vara Reddy Cc: Tanmay Shah Cc: Bjorn Andersson Cc: Manu Gautam Cc: Sandeep Maheswaram Cc: Douglas Anderson Cc: Sean Paul Cc: Stephen Boyd Cc: Jonathan Marek Cc: Dmitry Baryshkov Cc: Rob Clark Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org Link: https://lore.kernel.org/r/20200916231202.3637932-8-swboyd@chromium.org Signed-off-by: Vinod Koul