kernel/linux.git/drivers/phy/allwinner, branch v4.19.77

phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode

2019-05-31T13:46:20+00:00

[ Upstream commit e6f32efb1b128344a2c7df9875bc1a1abaa1d395 ] On platforms where the MUSB and HCI controllers share PHY0, PHY passby is required when using the HCI controller with the PHY, but it must be disabled when the MUSB controller is used instead. Without this, PHY0 passby is always enabled, which results in broken peripheral mode on such platforms (e.g. H3/H5). Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy") Signed-off-by: Paul Kocialkowski Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs

2019-04-03T04:26:27+00:00

commit 1396929e8a903db80425343cacca766a18ad6409 upstream. While only the first PHY supports mode switching, the remaining PHYs work in USB host mode. They should support set_mode with mode=USB_HOST instead of failing. This is especially needed now that the USB core does set_mode for all USB ports, which was added in commit b97a31348379 ("usb: core: comply to PHY framework"). Make set_mode with mode=USB_HOST a no-op instead of failing for the non-OTG USB PHYs. Fixes: 6ba43c291961 ("phy-sun4i-usb: Add support for phy_set_mode") Signed-off-by: Chen-Yu Tsai Cc: stable Signed-off-by: Greg Kroah-Hartman

phy: sun4i-usb: add support for missing USB PHY index

2019-02-12T18:47:09+00:00

[ Upstream commit 2659392e5c08dff626e6db1d739adff58a94604d ] The new Allwinner H6 SoC's USB2 PHY has two holes -- USB1 (which is a 3.0 port with dedicated PHY) and USB2 (which doesn't exist at all). Add support for this kind of missing USB PHY index. Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when driving VBUS

2018-03-12T09:42:21+00:00

The AXP223 PMIC, like the AXP221, does not generate VBUS change interrupts when N_VBUSEN is used to drive VBUS for the OTG port on the board. This was not noticed until recently, as most A23/A33 boards use a GPIO pin that does not support interrupts for OTG ID detection. This forces the driver to use polling. However the A33-OlinuXino uses a pin that does support interrupts, so the driver uses them. However the VBUS interrupt never fires, and the driver never gets to update the VBUS status. This results in musb timing out waiting for VBUS to rise. This was worked around for the AXP221 by resorting to polling changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31"). This patch adds the A23 and A33 to the list of SoCs that need the workaround. Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a33 SoC") Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a23 SoC") Cc: # 4.3.x: 68dbc2ce77bb phy-sun4i-usb: Use of_match_node to get model specific config data Cc: # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb: Fix optional gpios failing probe Cc: # 4.3.x: 04e59a0211ff phy-sun4i-usb: Fix irq free conditions to match request conditions Cc: # 4.3.x: 91d96f06a760 phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31 Cc: # 4.3.x Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Kishon Vijay Abraham I

phy: sun4i-usb: add support for R40 USB PHY

2018-02-21T06:24:33+00:00

Allwinner R40 features a USB PHY like the one in A64, but with 3 PHYs. Add support for it. Signed-off-by: Icenowy Zheng Acked-by: Maxime Ripard Acked-by: Rob Herring Tested-by: Hermann Lauer Signed-off-by: Kishon Vijay Abraham I

Merge tag 'extcon-next-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into usb-next

2017-10-27T10:36:06+00:00

Chanwoo writes: Update extcon for 4.15 Detailed description for this pull request: 1. Split out extcon header file for consumer and provider device : The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device. - include/linux/extcon-provider.h includes API for the provider device driver. - include/linux/extcon.h includes the API for the consumer device driver. 2. Support the SmartDock accessory on extcon-max77843.c device driver - Support the SmartDock accessory which detects following connectors at the same time. : USB host throught USB hub for mouse, keyboard and so on. : MHL connector for video output. : Charger connector for battery charging. - It tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. 3. Fix the minor issue of extcon driver - Delete the unneeded initialization in extcon-max14577. - Make extcon_info static const in order to fix the warning.

phy: sun4i-usb: enable PHY0 dual route for V3s SoC

2017-10-23T05:49:25+00:00

Allwinner V3s SoC also features the dual route of the first USB PHY. Enable it. Signed-off-by: Icenowy Zheng Signed-off-by: Kishon Vijay Abraham I

extcon: Split out extcon header file for consumer and provider device

2017-10-23T05:07:58+00:00

The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi Acked-by: Sebastian Reichel Acked-by: Chen-Yu Tsai Acked-by: Charles Keepax Acked-by: Lee Jones Acked-by: Felipe Balbi Acked-by: Yoshihiro Shimoda Acked-by: Kishon Vijay Abraham I

phy: sun4i-usb: Support A83T USB PHYs

2017-08-22T04:41:18+00:00

The A83T has 3 USB PHYs, 1 for OTG, 1 for standard USB, 1 for USB HSIC. The phy initialization procedure is very different from other SoCs, but the PMU bits are the same, with additional bits for HSIC. Signed-off-by: Chen-Yu Tsai Tested-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I

phy: sun4i-usb: Support secondary clock for HSIC PHY

2017-08-22T04:41:17+00:00

On the Allwinner A83T SoC, the last USB PHY is an HSIC PHY. It requires two clocks instead of one. On all Allwinner SoCs that share the common USB PHY design supported by the phy-sun4i-usb driver, the first PHY is always tied to OTG, and there is at most one HSIC PHY, typically the last. In this patch we take advantage of these known constraints and store an index in the compatible-string-related config structure describing which PHY is HSIC, needing the extra hsic_12M clock. Signed-off-by: Chen-Yu Tsai Signed-off-by: Kishon Vijay Abraham I