kernel/linux.git/drivers/perf, branch v6.6.132

perf/arm-cmn: Reject unsupported hardware configurations

2026-03-04T12:21:14+00:00

[ Upstream commit 36c0de02575ce59dfd879eb4ef63d53a68bbf9ce ] So far we've been fairly lax about accepting both unknown CMN models (at least with a warning), and unknown revisions of those which we do know, as although things do frequently change between releases, typically enough remains the same to be somewhat useful for at least some basic bringup checks. However, we also make assumptions of the maximum supported sizes and numbers of things in various places, and there's no guarantee that something new might not be bigger and lead to nasty array overflows. Make sure we only try to run on things that actually match our assumptions and so will not risk memory corruption. We have at least always failed on completely unknown node types, so update that error message for clarity and consistency too. Cc: stable@vger.kernel.org Fixes: 7819e05a0dce ("perf/arm-cmn: Revamp model detection") Reviewed-by: Ilkka Koskinen Signed-off-by: Robin Murphy Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD

2026-03-04T12:20:34+00:00

[ Upstream commit ab26d9c85554c4ff1d95ca8341522880ed9219d6 ] Passing IRQF_ONESHOT ensures that the interrupt source is masked until the secondary (threaded) handler is done. If only a primary handler is used then the flag makes no sense because the interrupt can not fire (again) while its handler is running. The flag also disallows force-threading of the primary handler and the irq-core will warn about this. The intention here was probably not allowing forced-threading. Replace IRQF_ONESHOT with IRQF_NO_THREAD. Reviewed-by: Jonathan Cameron Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf/arm-cmn: Support CMN-600AE

2026-03-04T12:20:33+00:00

[ Upstream commit 12a94953c37e834c3eabb839ce057094946fe67a ] The functional safety features of CMN-600AE have little to no impact on the PMU relative to the base CMN-600 design, so for simplicity we can reasonably just treat it as the same thing. The only obvious difference is that the revision numbers aren't aligned, so we may hide some aliases for events which do actually exist, but those can still be specified via the underlying "type,eventid" format so it's not too big a deal. Signed-off-by: Robin Murphy Reviewed-by: Ilkka Koskinen Tested-by: Michal Simek Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf: arm_spe: Properly set hw.state on failures

2026-03-04T12:19:29+00:00

[ Upstream commit 283182c1c239f6873d1a50e9e710c1a699f2256b ] When arm_spe_pmu_next_off() fails to calculate a valid limit, it returns zero to indicate that tracing should not start. However, the caller arm_spe_perf_aux_output_begin() does not propagate this failure by updating hwc->state, cause the error to be silently ignored by upper layers. Because hwc->state remains zero after a failure, arm_spe_pmu_start() continues to programs filter registers unnecessarily. The driver still reports success to the perf core, so the core assumes the SPE event was enabled and proceeds to enable other events. This breaks event group semantics: SPE is already stopped while other events in the same group are enabled. Fix this by updating arm_spe_perf_aux_output_begin() to return a status code indicating success (0) or failure (-EIO). Both the interrupt handler and arm_spe_pmu_start() check the return value and call arm_spe_pmu_stop() to set PERF_HES_STOPPED in hwc->state. In the interrupt handler, the period (e.g., period_left) needs to be updated, so PERF_EF_UPDATE is passed to arm_spe_pmu_stop(). When the error occurs during event start, the trace unit is not yet enabled, so a flag '0' is used to drain buffer and update state only. Fixes: d5d9696b0380 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension") Signed-off-by: Leo Yan Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

drivers/perf: hisi: Relax the event ID check in the framework

2025-10-29T13:07:00+00:00

[ Upstream commit 43de0ac332b815cf56dbdce63687de9acfd35d49 ] Event ID is only using the attr::config bit [7, 0] but we check the event range using the whole 64bit field. It blocks the usage of the rest field of attr::config. Relax the check by only using the bit [7, 0]. Acked-by: Jonathan Cameron Signed-off-by: Yicong Yang Signed-off-by: Yushan Wang Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf: arm_spe: Prevent overflow in PERF_IDX2OFF()

2025-10-15T09:57:48+00:00

[ Upstream commit a29fea30dd93da16652930162b177941abd8c75e ] Cast nr_pages to unsigned long to avoid overflow when handling large AUX buffer sizes (>= 2 GiB). Fixes: d5d9696b0380 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension") Signed-off-by: Leo Yan Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf/cxlpmu: Remove unintended newline from IRQ name format string

2025-08-28T14:28:21+00:00

[ Upstream commit 3e870815ccf5bc75274158f0b5e234fce6f93229 ] The IRQ name format string used in devm_kasprintf() mistakenly included a newline character "\n". This could lead to confusing log output or misformatted names in sysfs or debug messages. This fix removes the newline to ensure proper IRQ naming. Signed-off-by: Alok Tiwari Reviewed-by: Jonathan Cameron Link: https://lore.kernel.org/r/20250624194350.109790-3-alok.a.tiwari@oracle.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()

2025-06-19T13:28:08+00:00

[ Upstream commit 097469a2b0f12b91b4f27b9e9e4f2c46484cde30 ] The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context. Following kernel warning and stack trace: [ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289 [ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38 [ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0 [ 31.745181] [ T2289] Tainted: [W]=WARN [ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT) [ 31.745188] [ T2289] Call trace: [ 31.745191] [ T2289] show_stack+0x28/0x40 (C) [ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198 [ 31.745205] [ T2289] dump_stack+0x20/0x50 [ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0 [ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38 [ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745246] [ T2289] platform_probe+0x98/0xe0 [ 31.745254] [ T2289] really_probe+0x144/0x3f8 [ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180 [ 31.745261] [ T2289] driver_probe_device+0x54/0x268 [ 31.745264] [ T2289] __driver_attach+0x11c/0x288 [ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160 [ 31.745274] [ T2289] driver_attach+0x34/0x50 [ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0 [ 31.745281] [ T2289] driver_register+0x78/0x120 [ 31.745285] [ T2289] __platform_driver_register+0x30/0x48 [ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745298] [ T2289] do_one_initcall+0x11c/0x438 [ 31.745303] [ T2289] do_init_module+0x68/0x228 [ 31.745311] [ T2289] load_module+0x118c/0x13a8 [ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390 [ 31.745320] [ T2289] invoke_syscall+0x74/0x108 [ 31.745326] [ T2289] el0_svc_common+0x90/0xf8 [ 31.745330] [ T2289] do_el0_svc+0x2c/0x48 [ 31.745333] [ T2289] el0_svc+0x60/0x150 [ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118 [ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0 Changes replaces smp_processor_id() with raw_smp_processor_id() to ensure safe CPU ID retrieval in preemptible contexts. Cc: Jiucheng Xu Fixes: 2016e2113d35 ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver") Signed-off-by: Anand Moon Link: https://lore.kernel.org/r/20250407063206.5211-1-linux.amoon@gmail.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf/arm-cmn: Initialise cmn->cpu earlier

2025-06-04T12:42:24+00:00

commit 597704e201068db3d104de3c7a4d447ff8209127 upstream. For all the complexity of handling affinity for CPU hotplug, what we've apparently managed to overlook is that arm_cmn_init_irqs() has in fact always been setting the *initial* affinity of all IRQs to CPU 0, not the CPU we subsequently choose for event scheduling. Oh dear. Cc: stable@vger.kernel.org Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver") Signed-off-by: Robin Murphy Reviewed-by: Ilkka Koskinen Link: https://lore.kernel.org/r/b12fccba6b5b4d2674944f59e4daad91cd63420b.1747069914.git.robin.murphy@arm.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

perf/arm-cmn: Fix REQ2/SNP2 mixup

2025-06-04T12:42:24+00:00

commit 11b0f576e0cbde6a12258f2af6753b17b8df342b upstream. Somehow the encodings for REQ2/SNP2 channels in XP events got mixed up... Unmix them. CC: stable@vger.kernel.org Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support") Signed-off-by: Robin Murphy Link: https://lore.kernel.org/r/087023e9737ac93d7ec7a841da904758c254cb01.1746717400.git.robin.murphy@arm.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman