kernel/linux.git/drivers/perf, branch v6.1.168

perf/arm-cmn: Reject unsupported hardware configurations

2026-03-04T12:20:51+00:00

[ Upstream commit 36c0de02575ce59dfd879eb4ef63d53a68bbf9ce ] So far we've been fairly lax about accepting both unknown CMN models (at least with a warning), and unknown revisions of those which we do know, as although things do frequently change between releases, typically enough remains the same to be somewhat useful for at least some basic bringup checks. However, we also make assumptions of the maximum supported sizes and numbers of things in various places, and there's no guarantee that something new might not be bigger and lead to nasty array overflows. Make sure we only try to run on things that actually match our assumptions and so will not risk memory corruption. We have at least always failed on completely unknown node types, so update that error message for clarity and consistency too. Cc: stable@vger.kernel.org Fixes: 7819e05a0dce ("perf/arm-cmn: Revamp model detection") Reviewed-by: Ilkka Koskinen Signed-off-by: Robin Murphy Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf/arm-cmn: Support CMN-600AE

2026-03-04T12:20:13+00:00

[ Upstream commit 12a94953c37e834c3eabb839ce057094946fe67a ] The functional safety features of CMN-600AE have little to no impact on the PMU relative to the base CMN-600 design, so for simplicity we can reasonably just treat it as the same thing. The only obvious difference is that the revision numbers aren't aligned, so we may hide some aliases for events which do actually exist, but those can still be specified via the underlying "type,eventid" format so it's not too big a deal. Signed-off-by: Robin Murphy Reviewed-by: Ilkka Koskinen Tested-by: Michal Simek Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf: arm_spe: Prevent overflow in PERF_IDX2OFF()

2025-10-15T09:56:25+00:00

[ Upstream commit a29fea30dd93da16652930162b177941abd8c75e ] Cast nr_pages to unsigned long to avoid overflow when handling large AUX buffer sizes (>= 2 GiB). Fixes: d5d9696b0380 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension") Signed-off-by: Leo Yan Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf/arm-cmn: Initialise cmn->cpu earlier

2025-06-04T12:40:25+00:00

commit 597704e201068db3d104de3c7a4d447ff8209127 upstream. For all the complexity of handling affinity for CPU hotplug, what we've apparently managed to overlook is that arm_cmn_init_irqs() has in fact always been setting the *initial* affinity of all IRQs to CPU 0, not the CPU we subsequently choose for event scheduling. Oh dear. Cc: stable@vger.kernel.org Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver") Signed-off-by: Robin Murphy Reviewed-by: Ilkka Koskinen Link: https://lore.kernel.org/r/b12fccba6b5b4d2674944f59e4daad91cd63420b.1747069914.git.robin.murphy@arm.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

perf/arm-cmn: Fix REQ2/SNP2 mixup

2025-06-04T12:40:25+00:00

commit 11b0f576e0cbde6a12258f2af6753b17b8df342b upstream. Somehow the encodings for REQ2/SNP2 channels in XP events got mixed up... Unmix them. CC: stable@vger.kernel.org Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support") Signed-off-by: Robin Murphy Link: https://lore.kernel.org/r/087023e9737ac93d7ec7a841da904758c254cb01.1746717400.git.robin.murphy@arm.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

perf: arm_pmu: Don't disable counter in armpmu_add()

2025-04-25T08:43:27+00:00

[ Upstream commit dcca27bc1eccb9abc2552aab950b18a9742fb8e7 ] Currently armpmu_add() tries to handle a newly-allocated counter having a stale associated event, but this should not be possible, and if this were to happen the current mitigation is insufficient and potentially expensive. It would be better to warn if we encounter the impossible case. Calls to pmu::add() and pmu::del() are serialized by the core perf code, and armpmu_del() clears the relevant slot in pmu_hw_events::events[] before clearing the bit in pmu_hw_events::used_mask such that the counter can be reallocated. Thus when armpmu_add() allocates a counter index from pmu_hw_events::used_mask, it should not be possible to observe a stale even in pmu_hw_events::events[] unless either pmu_hw_events::used_mask or pmu_hw_events::events[] have been corrupted. If this were to happen, we'd end up with two events with the same event->hw.idx, which would clash with each other during reprogramming, deletion, etc, and produce bogus results. Add a WARN_ON_ONCE() for this case so that we can detect if this ever occurs in practice. That possiblity aside, there's no need to call arm_pmu::disable(event) for the new event. The PMU reset code initialises the counter in a disabled state, and armpmu_del() will disable the counter before it can be reused. Remove the redundant disable. Signed-off-by: Mark Rutland Signed-off-by: Rob Herring (Arm) Reviewed-by: Anshuman Khandual Tested-by: James Clark Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-2-4e9922fc2e8e@kernel.org Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

perf/arm-cmn: Ensure port and device id bits are set properly

2024-12-14T18:54:09+00:00

[ Upstream commit dfdf714fed559c09021df1d2a4bb64c0ad5f53bc ] The portid_bits and deviceid_bits were set only for XP type nodes in the arm_cmn_discover() and it confused other nodes to find XP nodes. Copy the both bits from the XP nodes directly when it sets up a new node. Fixes: e79634b53e39 ("perf/arm-cmn: Refactor node ID handling. Again.") Signed-off-by: Namhyung Kim Acked-by: Will Deacon Reviewed-by: Robin Murphy Link: https://lore.kernel.org/r/20241121001334.331334-1-namhyung@kernel.org Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin

perf/arm-smmuv3: Fix lockdep assert in ->event_init()

2024-12-14T18:54:09+00:00

[ Upstream commit 02a55f2743012a8089f09f6867220c3d57f16564 ] Same as https://lore.kernel.org/all/20240514180050.182454-1-namhyung@kernel.org/, we should skip `for_each_sibling_event()` for group leader since it doesn't have the ctx yet. Fixes: f3c0eba28704 ("perf: Add a few assertions") Reported-by: Greg Thelen Cc: Namhyung Kim Cc: Robin Murphy Cc: Tuan Phan Signed-off-by: Chun-Tse Shao Acked-by: Will Deacon Link: https://lore.kernel.org/r/20241108050806.3730811-1-ctshao@google.com Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin

perf/arm-cmn: Fail DTC counter allocation correctly

2024-10-17T13:21:28+00:00

commit 1892fe103c3a20fced306c8dafa74f7f6d4ea0a3 upstream. Calling arm_cmn_event_clear() before all DTC indices are allocated is wrong, and can lead to arm_cmn_event_add() erroneously clearing live counters from full DTCs where allocation fails. Since the DTC counters are only updated by arm_cmn_init_counter() after all DTC and DTM allocations succeed, nothing actually needs cleaning up in this case anyway, and it should just return directly as it did before. Fixes: 7633ec2c262f ("perf/arm-cmn: Rework DTC counters (again)") Signed-off-by: Robin Murphy Reviewed-by: Ilkka Koskinen Acked-by: Will Deacon Link: https://lore.kernel.org/r/ed589c0d8e4130dc68b8ad1625226d28bdc185d4.1702322847.git.robin.murphy@arm.com Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman

perf/arm-cmn: Ensure dtm_idx is big enough

2024-10-17T13:20:40+00:00

[ Upstream commit 359414b33e00bae91e4eabf3e4ef8e76024c7673 ] While CMN_MAX_DIMENSION was bumped to 12 for CMN-650, that only supports up to a 10x10 mesh, so bumping dtm_idx to 256 bits at the time worked out OK in practice. However CMN-700 did finally support up to 144 XPs, and thus needs a worst-case 288 bits of dtm_idx for an aggregated XP event on a maxed-out config. Oops. Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support") Signed-off-by: Robin Murphy Link: https://lore.kernel.org/r/e771b358526a0d7fc06efee2c3a2fdc0c9f51d44.1725296395.git.robin.murphy@arm.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin