kernel/linux.git/drivers/perf/Kconfig, branch v5.9.12

soc: qcom: Separate kryo l2 accessors from PMU driver

2020-07-11T00:08:55+00:00

The driver provides kernel level API for other drivers to access the MSM8996 L2 cache registers. Separating the L2 access code from the PMU driver and making it public to allow other drivers use it. The accesses must be separated with a single spinlock, maintained in this driver. Signed-off-by: Ilia Lin Signed-off-by: Loic Poulain Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org Acked-by: Will Deacon Signed-off-by: Stephen Boyd

drivers/perf: hisi: Permit modular builds of HiSilicon uncore drivers

2020-05-18T17:18:39+00:00

This patch lets HiSilicon uncore PMU driver can be built as modules. A common module and three specific uncore PMU driver modules will be built. Export necessary functions in hisi_uncore_pmu module, and change irq_set_affinity to irq_set_affinity_hint to pass compile. Signed-off-by: Zhou Wang Tested-by: Qi Liu Reviewed-by: Shaokun Zhang Link: https://lore.kernel.org/r/1588820305-174479-1-git-send-email-wangzhou1@hisilicon.com Signed-off-by: Will Deacon

drivers/perf: imx_ddr: Add DDR performance counter support to perf

2019-06-13T10:07:57+00:00

Add DDR performance monitor support for iMX8QXP. The PMU consists of 3 programmable event counters and a single dedicated cycle counter. Example usage: $ perf stat -a -e \ imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/,imx8_ddr0/precharge/ ls - or - $ perf stat -a -e \ imx8_ddr0/cycles/,imx8_ddr0/read-access/,imx8_ddr0/write-access/ ls Other events are supported, and advertised via perf list. Reviewed-by: Andrey Smirnov Signed-off-by: Frank Li [will: rewrote commit message/kconfig and used #defines for dev/cpuhp names] Signed-off-by: Will Deacon

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

perf/smmuv3: Add arm64 smmuv3 pmu driver

2019-04-04T15:49:21+00:00

Adds a new driver to support the SMMUv3 PMU and add it into the perf events framework. Each SMMU node may have multiple PMUs associated with it, each of which may support different events. SMMUv3 PMCG devices are named as smmuv3_pmcg_ where is the physical page address of the SMMU PMCG wrapped to 4K boundary. For example, the PMCG at 0xff88840000 is named smmuv3_pmcg_ff88840 Filtering by stream id is done by specifying filtering parameters with the event. options are: filter_enable - 0 = no filtering, 1 = filtering enabled filter_span - 0 = exact match, 1 = pattern match filter_stream_id - pattern to filter against Example: perf stat -e smmuv3_pmcg_ff88840/transaction,filter_enable=1, filter_span=1,filter_stream_id=0x42/ -a netperf Applies filter pattern 0x42 to transaction events, which means events matching stream ids 0x42 & 0x43 are counted as only upper StreamID bits are required to match the given filter. Further filtering information is available in the SMMU documentation. SMMU events are not attributable to a CPU, so task mode and sampling are not supported. Signed-off-by: Neil Leeder Signed-off-by: Shameer Kolothum Reviewed-by: Robin Murphy [will: fold in review feedback from Robin] [will: rewrite Kconfig text and allow building as a module] Signed-off-by: Will Deacon

drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver

2018-12-06T13:03:17+00:00

This patch adds a perf driver for the PMU UNCORE devices DDR4 Memory Controller(DMC) and Level 3 Cache(L3C). Each PMU supports up to 4 counters. All counters lack overflow interrupt and are sampled periodically. Reviewed-by: Suzuki K Poulose Signed-off-by: Ganapatrao Kulkarni [will: consistent enum cpuhp_state naming] Signed-off-by: Will Deacon

drivers/perf: Remove ARM_SPE_PMU explicit PERF_EVENTS dependency

2018-05-22T16:11:12+00:00

Since commit bddb9b68d3fb ("drivers/perf: commonise PERF_EVENTS dependency"), all perf drivers depend on PERF_EVENTS config under a common menu. Config ARM_SPE_PMU still declares explicitly a dependency on PERF_EVENTS, which is unneeded, so remove it. Acked-by: Mark Rutland Signed-off-by: John Garry Signed-off-by: Will Deacon

perf/arm-cci: Allow building as a module

2018-05-21T17:12:54+00:00

Fill in the few extra bits and annotations needed to make the driver work properly as a module, and jiggle the Kconfig to expose the driver-level ARM_CCI_PMU option. Signed-off-by: Robin Murphy Signed-off-by: Will Deacon

drivers/bus: Split Arm CCI driver

2018-03-06T16:26:17+00:00

The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi Reviewed-by: Suzuki Poulose Acked-by: Punit Agrawal Signed-off-by: Robin Murphy Signed-off-by: Arnd Bergmann

drivers/bus: Move Arm CCN PMU driver

2018-03-06T16:26:15+00:00

The arm-ccn driver is purely a perf driver for the CCN PMU, not a bus driver in the sense of the other residents of drivers/bus/, so let's move it to the appropriate place for SoC PMU drivers. Not to mention moving the documentation accordingly as well. Acked-by: Pawel Moll Acked-by: Will Deacon Signed-off-by: Robin Murphy Signed-off-by: Arnd Bergmann