kernel/linux.git/drivers/pci, branch v7.2-rc7

Merge tag 'pci-v7.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2026-07-31T17:11:52+00:00

Pull pci fixes from Bjorn Helgaas: - Remove Karthikeyan Mitran from Mobiveil MAINTAINERS PCIe entry since email bounces (Manivannan Sadhasivam) - Preserve i.MX6Q, i.MX6QP, and i.MX6SX Root Port MSI/MSI-X Capabilities when using iMSI-RX to work around hardware defect (Soeren Moch) - Reorder i.MX6Q/DL PHY power up to fix boot hang regression (Richard Zhu) * tag 'pci-v7.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: imx6: Fix i.MX6Q/DL boot hang caused by improper PHY power sequencing PCI: imx6: Keep i.MX6 Root Port MSI/MSI-X Capabilities with iMSI-RX to work around hardware bug MAINTAINERS: Drop Karthikeyan Mitran from Mobiveil PCIe entry

PCI: imx6: Fix i.MX6Q/DL boot hang caused by improper PHY power sequencing

2026-07-28T16:37:06+00:00

commit 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators") introduced a boot hang on i.MX6Q/DL variants by reordering imx_pcie_host_init() to call imx6q_pcie_enable_ref_clk() (which powered up the PHY) before imx6q_pcie_core_reset() (which powered it back down). Before 610fa91d9863, the sequence was: 1. imx_pcie_assert_core_reset() - power down PHY (set TEST_PD), set REF_CLK_EN 2. imx_pcie_clk_enable() - power up PHY (clear TEST_PD), set REF_CLK_EN 3. Link training starts with PHY powered up (TEST_PD cleared) 4. Link training succeeds After 610fa91d9863, the sequence became: 1. imx_pcie_clk_enable() - power up PHY (clear TEST_PD), set REF_CLK_EN 2. imx_pcie_assert_core_reset() - power down PHY (set TEST_PD), set REF_CLK_EN 3. imx_pcie_deassert_core_reset() - does nothing 4. Link training starts with PHY powered down (TEST_PD set) 5. Link training fails and boot hangs when PHY register accesses hang To fix this: - Remove TEST_PD PHY power control from imx6q_pcie_enable_ref_clk() - Remove REF_CLK_EN control from imx6q_pcie_core_reset() - Add TEST_PD PHY power control to imx6qp_pcie_core_reset(), which previously relied on imx6q_pcie_enable_ref_clk() to power up the PHY by clearing TEST_PD - Clear TEST_PD to power on PHY in imx_pcie_deassert_core_reset() These changes together ensure the correct sequence: 1. REF_CLK_EN set in clk_enable() (TEST_PD untouched) 2. TEST_PD set in assert_core_reset() (PHY power off) 3. TEST_PD cleared in deassert_core_reset() (PHY power on) 4. Link training starts with proper PHY state The i.MX6Q/DL PCIe PHY requires approximately 120us between TEST_PD de-assertion and link training start. Add usleep_range(200, 500) in imx6q_pcie_core_reset() after clearing TEST_PD to satisfy this requirement. Add explicit imx_pcie_assert_core_reset() calls in error paths and host_exit() to ensure no power leak. Fixes: 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators") Reported-by: Leonardo Costa Closes: https://lore.kernel.org/lkml/20260629143439.361560-1-leoreis.costa@gmail.com/ Signed-off-by: Richard Zhu Signed-off-by: Bjorn Helgaas Tested-by: Leonardo Costa Reviewed-by: Frank Li Link: https://patch.msgid.link/20260728035159.2702021-1-hongxing.zhu@oss.nxp.com

PCI: imx6: Keep i.MX6 Root Port MSI/MSI-X Capabilities with iMSI-RX to work around hardware bug

2026-07-17T16:59:41+00:00

On some NXP chipsets, disabling Root Port MSI/MSI-X Capabilities blocks MSIs originating from Endpoints from reaching the iMSI-RX controller. To address this hardware bug, commit 3a4e8302e72f ("PCI: imx6: Keep Root Port MSI capability with iMSI-RX to work around hardware bug") preserves Root Port MSI and MSI-X Capabilities on i.MX7D, i.MX8MM, and i.MX8MQ when iMSI-RX is in use. The same applies to i.MX6Q, i.MX6QP, and i.MX6SX, so preserve Root Port MSI/MSI-X Capabilities there as well. Note that preserving these Capabilities means Root Port-originated MSIs such as AER and PME won't be received due to separate hardware limitations. Users may need to use workarounds such as passing the 'pcie_pme=nomsi' command-line parameter. Fixes: f5cd8a929c825 ("PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller") Signed-off-by: Soeren Moch Signed-off-by: Richard Zhu Signed-off-by: Bjorn Helgaas Reviewed-by: Frank Li Reviewed-by: Manivannan Sadhasivam Acked-by: Richard Zhu Cc: stable@vger.kernel.org # 7.0+ Link: https://patch.msgid.link/20260717033203.2965045-1-hongxing.zhu@oss.nxp.com

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2026-06-24T19:48:43+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked around a WiFi device defect; use a quirk or boot-time "pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas) - Always lift 2.5GT/s restriction in PCIe failed link retraining to avoid clamping a link to 2.5GT/s after hot-plug changes the device (Maciej W. Rozycki) - Request bus reassignment when not probe-only to fix an enumeration regression on Marvell CN106XX and possibly other DT-based systems (Ratheesh Kannoth) - Fix procfs race between pci_proc_init() and pci_bus_add_device() that resulted in 'proc_dir_entry ... already registered' warnings and pointer corruption (Krzysztof Wilczyński) - Fix sysfs race that causes 'duplicate filename' warnings and boot panics by converting PCI resource files to static attributes (Krzysztof Wilczyński) - Expose sysfs 'resourceN_resize' attributes only on platforms with PCI mmap (Krzysztof Wilczyński) - Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize' attributes (Krzysztof Wilczyński) - Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource mmap path to match the generic path (Krzysztof Wilczyński) - Use kstrtobool() to parse the 'rom' attribute input to avoid the unexpected behavior of enabling the ROM when writing '0' with no trailing newline (Krzysztof Wilczyński) Resource management: - Improve resource claim logging for debuggability (Ilpo Järvinen) - Clean up several uses of const parameters (Ilpo Järvinen) - Check option ROM header signatures and lengths before accessing to avoid page faults and alignment faults (Guixin Liu) ASPM: - Don't reconfigure ASPM when entering low-power D-state; only do it when returning back to D0 (Carlos Bilbao) Power management: - During suspend, set power state to 'unknown' for all devices, not just those with drivers (Lukas Wunner) - Skip restoring Resizable BARs and VF Resizable BARs if device doesn't respond to config reads, to avoid invalid array accesses (Marco Nenciarini) - Add pci_suspend_retains_context() so drivers can tell whether devices retain internal state across suspend/resume, since some platforms reset devices on suspend; use this in nvme to avoid issues on Qcom RCs (Manivannan Sadhasivam) Power control: - Only to power on/off devices that actually support power control to avoid poking at incompatible devices mentioned in DT (Manivannan Sadhasivam) Virtualization and resets: - Log device readiness timeouts as errors, not warnings, because the device is likely unusable in this case (Bjorn Helgaas) - Wait for device readiness after soft reset (D3hot -> D0uninitialized transition), when the device may respond with Request Retry Status (RRS) if it needs more time to initialize (Bjorn Helgaas) - Drop unnecessary retries when restoring BARs because resets should now already include all required delays (Lukas Wunner) - Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM terminates uncleanly (Jose Ignacio Tornos Martinez) - Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems, which seem not to support it correctly (Jose Ignacio Tornos Martinez) Peer-to-peer DMA: - Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g., s390 ISM BARs (Matt Evans) - Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner) Endpoint framework: - Add endpoint controller APIs for use by function drivers to discover auxiliary blocks like DMA engines (Koichiro Den) - Remember DesignWare eDMA engine base/size and expose them via the EPC aux-resource API (Koichiro Den) - Add endpoint embedded doorbell fallback, used if MSI allocation fails (Koichiro Den) - Validate BAR index and remove dead BAR read in endpoint doorbell test (Carlos Bilbao) - Unwind MSI/MSI-X vectors if NTB initialization fails part-way through (Koichiro Den) - Cache sleepable pci_irq_vector() value at ISR setup to avoid calling it from hardirq context (Koichiro Den) - Call sleepable pci_epc_raise_irq() from a work item instead of atomic context, e.g., when setting bits in NTB peer doorbells in the ntb_peer_db_set() path (Koichiro Den) - Report 0-based vNTB doorbell vector to account for link event 0 and historically skipped slot 1 (Koichiro Den) - Prevent configfs writes to vNTB db_count and other values that are already in use after EPC attach (Koichiro Den) - Account for vNTB db_valid reserved slots (link event 0 and historically skipped slot 1) so they don't appear as valid doorbells (Koichiro Den) - Implement vNTB .db_vector_count()/mask() for doorbells so clients can use multiple vectors and avoid thundering herds (Koichiro Den) - Report 0-based NTB doorbell vector to account for link event 0 and historically skipped slot 1 (Koichiro Den) - Fix doorbell bitmask and IRQ vector handling to clear only specified bits, use the correct vector for non-contiguous Linux IRQ numbers, and validate incoming vectors (Koichiro Den) - Implement NTB .db_vector_count()/mask() for doorbells so clients can use multiple vectors (Koichiro Den) Native PCIe controller infrastructure: - Add pci_host_common_link_train_delay() for the mandatory delay after > 5GT/s Link training completes and use it for cadence HPA, j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang) - Protect root bus removal with rescan lock in altera, brcmstb, cadence, dwc, iproc, mediatek, plda, rockchip to prevent use-after-free or crashes when racing with sysfs rescan or hotplug (Hans Zhang) - Add pci_host_common_parse_ports() for use by any native driver to parse Root Port properties (per-Link features like width, speed, PHY, power and reset control, etc should be described in Root Port stanzas, not the host bridge; currently only reset GPIOs implemented) (Sherry Sun) New native PCIe controller drivers: - Add DT binding and driver for UltraRISC DP1000 PCIe controller (Xincheng Zhang, Jia Wang) Altera PCIe controller driver: - Do not dispose of the parent IRQ mapping, which belongs to the parent interrupt controller (Mahesh Vaidya) - Fix chained IRQ handler ordering issue and resource leaks on probe failure (Mahesh Vaidya) AMD MDB PCIe controller driver: - Assert PERST# on shutdown so any connected Endpoints are held in reset during shutdown (Sai Krishna Musham) Amlogic Meson PCIe controller driver: - Propagate devm_add_action_or_reset() failure to fix probe error path (Shuvam Pandey) - Add .remove() callback to deinitialize the host bridge and power off the PHY (Shuvam Pandey) Broadcom iProc PCIe controller driver: - Restore .map_irq() assignment; its removal broke INTx on the iproc platform bus driver (Mark Tomlinson) Broadcom STB PCIe controller driver: - No change, but products using certain WiFi devices may be affected by removal of CONFIG_PCIE_BUS_* (see above) Freescale i.MX6 PCIe controller driver: - Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset functions (Richard Zhu) - Assert PERST# before enabling regulators to ensure that even if power is enabled, endpoint stays inactive until REFCLK is stable (Sherry Sun) - Parse reset properties in Root Port nodes (falling back to host bridge) to help support Key E connectors and the pwrctrl framework (Sherry Sun) - Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu) - Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard Zhu) - Integrate new pwrctrl API for DTs with Root Port-level power supplies (Sherry Sun) Intel Gateway PCIe controller driver: - Enable clock before PHY init for correct ordering (Florian Eckert) - Add .start_link() callback so the driver works again (Florian Eckert) - Stop overwriting the ATU base address discovered by dw_pcie_get_resources() (Florian Eckert) - Add DT 'atu' region since this is hardware-specific, and fall back to driver default if lacking (Florian Eckert) Loongson PCIe controller driver: - Ignore downstream devices only on internal bridges to avoid Loongson hardware issue (Rong Zhang) - Quirk old Loongson-3C6000 bridges that advertise incorrect supported link speeds (Ziyao Li) Marvell MVEBU PCIe controller driver: - Use fixed-width interrupt masks to avoid truncation in 64-bit builds (Rosen Penev) MediaTek PCIe controller driver: - Use FIELD_PREP() to fix incorrect operator precedence in PCIE_FTS_NUM_L0 (Li RongQing) - Fix IRQ domain leak when port fails to enable (Manivannan Sadhasivam) - Use actual physical address for MSI message address instead of virt_to_phys() (Manivannan Sadhasivam) - Add EcoNet EN7528 to DT binding (Caleb James DeLisle) MediaTek PCIe Gen3 controller driver: - Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms (PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang) - Add .shutdown() to assert PERST# before powering down device (Jian Yang) - Do full device power down on removal, including asserting PERST#, when removing driver (Chen-Yu Tsai) - Fix a 'failed to create pwrctrl devices' error message that was inadvertently skipped (Chen-Yu Tsai) NVIDIA Tegra194 PCIe controller driver: - Program the DesignWare PORT_AFR L1 entrance latency based on the 'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy) Qualcomm PCIe controller driver: - Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru) - Set max OPP during resume so DBI register accesses don't fail with NoC errors (Qiang Yu) - Add pci_host_common_d3cold_possible() to determine whether downstream devices are already in D3hot and wakeup-enabled devices are capable of generating PME from D3cold (Krishna Chaitanya Chundru) - Add .get_ltssm() callback to get the LTSSM status without DBI, since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya Chundru) - Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to avoid power leakage (Krishna Chaitanya Chundru) - Decide whether suspend should put the link in L2 and power down using pci_host_common_d3cold_possible() instead of checking whether ASPM L1 is enabled (Krishna Chaitanya Chundru) - Add qcom D3cold support to tear down interconnect bandwidth and OPP votes (Krishna Chaitanya Chundru) - Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in RP node while PERST# is in the RC node, but warn about the DT issue (Qiang Yu) - Program T_POWER_ON based on DT 't-power-on-us' property in case hardware advertises incorrect values (Krishna Chaitanya Chundru) - Disable ASPM L0s for SA8775P (Shawn Guo) - Initialize DWC MSI lock for firmware-managed ECAM hosts, which don't use the dw_pcie_host_init() path that initializes the lock (Yadu M G) Renesas RZ/G3S PCIe controller driver: - Add RZ/V2N DT support (Lad Prabhakar) SOPHGO PCIe controller driver: - Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao) Synopsys DesignWare PCIe controller driver: - Apply ECRC TLP Digest workaround for all DesignWare cores prior to 5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy) - Use common struct dw_pcie 'mode' rather than duplicating it in artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang) - Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce boilerplate and fix a seq_file memory leak by including a .release() callback (Hans Zhang) - Fix a signedness bug in fault injection test code (Dan Carpenter) - Avoid NULL pointer dereference when tearing down debugfs for controller that lacks RAS DES capability (Shuvam Pandey) MicroSemi Switchtec management driver: - Add Gen6 Device IDs (Ben Reed) Miscellaneous: - Remove unused gpio.h include from amd-mdb, designware-plat, fu740, visconti drivers (Andy Shevchenko) - Fix typos in documentation (josh ziegler) - Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)" * tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits) PCI/sysfs: Use kstrtobool() to parse the ROM attribute input PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init() PCI/sysfs: Convert legacy I/O and memory attributes to static definitions PCI/sysfs: Add __weak pci_legacy_has_sparse() helper alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range() PCI: Add macros for legacy I/O and memory address space sizes PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files() alpha/PCI: Convert resource files to static attributes alpha/PCI: Add static PCI resource attribute macros alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits() alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs alpha/PCI: Use PCI resource accessor macros alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer alpha/PCI: Add security_locked_down() check to pci_mmap_resource() PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files() PCI/sysfs: Warn about BAR resize failure in __resource_resize_store() PCI/sysfs: Convert PCI resource files to static attributes PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device() ...

Merge tag 'irq-msi-2026-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2026-06-24T19:41:04+00:00

Pull MSI irq fix from Ingo Molnar: - Revert a change that added a bad iounmap(NULL) call to the MSI IRQ support code (Yuanhe Shu) * tag 'irq-msi-2026-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "PCI/MSI: Unmap MSI-X region on error"

Merge branch 'pci/misc'

2026-06-23T22:32:24+00:00

- Fix typos in documentation (josh ziegler) - Use FIELD_MODIFY() instead of open-coding it (Hans Zhang) * pci/misc: PCI: Use FIELD_MODIFY() instead of open-coding it Documentation: PCI: Fix typos

Merge branch 'pci/controller/misc'

2026-06-23T22:32:23+00:00

- Remove unused gpio.h include from amd-mdb, designware-plat, fu740, visconti drivers (Andy Shevchenko) * pci/controller/misc: PCI: visconti: Drop unused include PCI: fu740: Drop unused include PCI: designware-plat: Drop unused include PCI: amd-mdb: Use the right GPIO header

Merge branch 'pci/controller/tlp_macros'

2026-06-23T22:32:23+00:00

- Add common TLP Type macros (MRd/Wr, IORd/Wr, CfgRd/Wr 0, CfgRd/Wr 1, Msg) and use them in aspeed, cadence, dwc, mediatek, tegra drivers (Hans Zhang) * pci/controller/tlp_macros: PCI: cadence: Use common TLP type macros PCI: dwc: Replace ATU type macros with common TLP type macros PCI: Add common TLP type macros and convert aspeed/mediatek

Merge branch 'pci/controller/rescan_lock'

2026-06-23T22:32:23+00:00

- Protect root bus removal with rescan lock in altera, brcmstb, cadence, dwc, iproc, mediatek, plda, rockchip to prevent use-after-free or crashes when racing with sysfs rescan or hotplug (Hans Zhang) * pci/controller/rescan_lock: PCI: rockchip: Protect root bus removal with rescan lock PCI: plda: Protect root bus removal with rescan lock PCI: mediatek: Protect root bus removal with rescan lock PCI: iproc: Protect root bus removal with rescan lock PCI: dwc: Protect root bus removal with rescan lock PCI: cadence: Protect root bus removal with rescan lock PCI: brcmstb: Protect root bus removal with rescan lock PCI: altera: Protect root bus removal with rescan lock