kernel/linux.git/drivers/pci, branch v4.19.77

PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it

2019-10-01T06:26:09+00:00

[ Upstream commit 533ca1feed98b0bf024779a14760694c7cb4d431 ] The slot must be removed before the pci_dev is removed, otherwise a panic can happen due to use-after-free. Fixes: 15becc2b56c6 ("PCI: hv: Add hv_pci_remove_slots() when we unload the driver") Signed-off-by: Dexuan Cui Signed-off-by: Lorenzo Pieralisi Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

PCI: kirin: Fix section mismatch warning

2019-09-21T05:17:14+00:00

commit 6870b673509779195cab300aedc844b352d9cfbc upstream. The PCI kirin driver compilation produces the following section mismatch warning: WARNING: vmlinux.o(.text+0x4758cc): Section mismatch in reference from the function kirin_pcie_probe() to the function .init.text:kirin_add_pcie_port() The function kirin_pcie_probe() references the function __init kirin_add_pcie_port(). This is often because kirin_pcie_probe lacks a __init annotation or the annotation of kirin_add_pcie_port is wrong. Remove '__init' from kirin_add_pcie_port() to fix it. Fixes: fc5165db245a ("PCI: kirin: Add HiSilicon Kirin SoC PCIe controller driver") Reported-by: Nick Desaulniers Signed-off-by: Nathan Chancellor [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Greg Kroah-Hartman

PCI: Always allow probing with driver_override

2019-09-19T07:09:37+00:00

commit 2d2f4273cbe9058d1f5a518e5e880d27d7b3b30f upstream. Commit 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") introduced the sriov_drivers_autoprobe attribute which allows users to prevent the kernel from automatically probing a driver for new VFs as they are created. This allows VFs to be spawned without automatically binding the new device to a host driver, such as in cases where the user intends to use the device only with a meta driver like vfio-pci. However, the current implementation prevents any use of drivers_probe with the VF while sriov_drivers_autoprobe=0. This blocks the now current general practice of setting driver_override followed by using drivers_probe to bind a device to a specified driver. The kernel never automatically sets a driver_override therefore it seems we can assume a driver_override reflects the intent of the user. Also, probing a device using a driver_override match seems outside the scope of the 'auto' part of sriov_drivers_autoprobe. Therefore, let's allow driver_override matches regardless of sriov_drivers_autoprobe, which we can do by simply testing if a driver_override is set for a device as a 'can probe' condition. Fixes: 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") Link: https://lore.kernel.org/lkml/155742996741.21878.569845487290798703.stgit@gimli.home Link: https://lore.kernel.org/linux-pci/155672991496.20698.4279330795743262888.stgit@gimli.home/T/#u Signed-off-by: Alex Williamson Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman

PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaround

2019-09-16T06:22:24+00:00

[ Upstream commit ad54567ad5d8e938ee6cf02e4f3867f18835ae6e ] quirk_reset_lenovo_thinkpad_50_nvgpu() resets NVIDIA GPUs to work around an apparent BIOS defect. It previously used pci_reset_function(), and the available method was a bus reset, which was fine because there was only one function on the bus. After b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), there are now two functions (the HDA controller and the GPU itself) on the bus, so the reset fails. Use pci_reset_bus() explicitly instead of pci_reset_function() since it's OK to reset both devices. [bhelgaas: commit log, add e0547c81bfcf] Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers") Fixes: e0547c81bfcf ("PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary") Link: https://lore.kernel.org/r/20190801220117.14952-1-lyude@redhat.com Signed-off-by: Lyude Paul Signed-off-by: Bjorn Helgaas Acked-by: Ben Skeggs Cc: Lukas Wunner Cc: Daniel Drake Cc: Aaron Plattner Cc: Peter Wu Cc: Ilia Mirkin Cc: Karol Herbst Cc: Maik Freudenberg Signed-off-by: Sasha Levin

PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code

2019-09-16T06:22:13+00:00

[ Upstream commit e6fdd3bf5aecd8615f31a5128775b9abcf3e0d86 ] Use devm_pci_alloc_host_bridge() to simplify the error code path. This also fixes a leak in the dw_pcie_host_init() error path. Signed-off-by: Jisheng Zhang Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Gustavo Pimentel CC: stable@vger.kernel.org # v4.13+ Signed-off-by: Sasha Levin

PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary

2019-09-16T06:22:12+00:00

[ Upstream commit e0547c81bfcfad01cbbfa93a5e66bb98ab932f80 ] On ThinkPad P50 SKUs with an Nvidia Quadro M1000M instead of the M2000M variant, the BIOS does not always reset the secondary Nvidia GPU during reboot if the laptop is configured in Hybrid Graphics mode. The reason is unknown, but the following steps and possibly a good bit of patience will reproduce the issue: 1. Boot up the laptop normally in Hybrid Graphics mode 2. Make sure nouveau is loaded and that the GPU is awake 3. Allow the Nvidia GPU to runtime suspend itself after being idle 4. Reboot the machine, the more sudden the better (e.g. sysrq-b may help) 5. If nouveau loads up properly, reboot the machine again and go back to step 2 until you reproduce the issue This results in some very strange behavior: the GPU will be left in exactly the same state it was in when the previously booted kernel started the reboot. This has all sorts of bad side effects: for starters, this completely breaks nouveau starting with a mysterious EVO channel failure that happens well before we've actually used the EVO channel for anything: nouveau 0000:01:00.0: disp: chid 0 mthd 0000 data 00000400 00001000 00000002 This causes a timeout trying to bring up the GR ctx: nouveau 0000:01:00.0: timeout WARNING: CPU: 0 PID: 12 at drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf100.c:1547 gf100_grctx_generate+0x7b2/0x850 [nouveau] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET82W (1.55 ) 12/18/2018 Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] ... nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1) nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1) nouveau 0000:01:00.0: fifo: fault 01 [WRITE] at 0000000000008000 engine 00 [GR] client 15 [HUB/SCC_NB] reason c4 [] on channel -1 [0000000000 unknown] The GPU never manages to recover. Booting without loading nouveau causes issues as well, since the GPU starts sending spurious interrupts that cause other device's IRQs to get disabled by the kernel: irq 16: nobody cared (try booting with the "irqpoll" option) ... handlers: [<000000007faa9e99>] i801_isr [i2c_i801] Disabling IRQ #16 ... serio: RMI4 PS/2 pass-through port at rmi4-00.fn03 i801_smbus 0000:00:1f.4: Timeout waiting for interrupt! i801_smbus 0000:00:1f.4: Transaction timeout rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-110). i801_smbus 0000:00:1f.4: Timeout waiting for interrupt! i801_smbus 0000:00:1f.4: Transaction timeout rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts! This causes the touchpad and sometimes other things to get disabled. Since this happens without nouveau, we can't fix this problem from nouveau itself. Add a PCI quirk for the specific P50 variant of this GPU. Make sure the GPU is advertising NoReset- so we don't reset the GPU when the machine is in Dedicated graphics mode (where the GPU being initialized by the BIOS is normal and expected). Map the GPU MMIO space and read the magic 0x2240c register, which will have bit 1 set if the device was POSTed during a previous boot. Once we've confirmed all of this, reset the GPU and re-disable it - bringing it back to a healthy state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203003 Link: https://lore.kernel.org/lkml/20190212220230.1568-1-lyude@redhat.com Signed-off-by: Lyude Paul Signed-off-by: Bjorn Helgaas Cc: nouveau@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: Karol Herbst Cc: Ben Skeggs Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

PCI: Add macro for Switchtec quirk declarations

2019-09-16T06:22:12+00:00

[ Upstream commit 01d5d7fa8376c6b5acda86e16fcad22de6bba486 ] Add SWITCHTEC_QUIRK() to reduce redundancy in declaring devices that use quirk_switchtec_ntb_dma_alias(). By itself, this is no functional change, but a subsequent patch updates SWITCHTEC_QUIRK() to fix ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB"). Fixes: ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB") Signed-off-by: Logan Gunthorpe [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

PCI: qcom: Don't deassert reset GPIO during probe

2019-09-16T06:22:08+00:00

[ Upstream commit 02b485e31d98265189b91f3e69c43df2ed50610c ] Acquiring the reset GPIO low means that reset is being deasserted, this is followed almost immediately with qcom_pcie_host_init() asserting it, initializing it and then finally deasserting it again, for the link to come up. Some PCIe devices requires a minimum time between the initial deassert and subsequent reset cycles. In a platform that boots with the reset GPIO asserted this requirement is being violated by this deassert/assert pulse. Acquire the reset GPIO high to prevent this situation by matching the state to the subsequent asserted state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Bjorn Andersson [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Acked-by: Stanimir Varbanov Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

PCI: qcom: Fix error handling in runtime PM support

2019-09-16T06:22:08+00:00

[ Upstream commit 6e5da6f7d82474e94c2d4a38cf9ca4edbb3e03a0 ] The driver does not cope with the fact that probe can fail in a number of cases after enabling runtime PM on the device; this results in warnings about "Unbalanced pm_runtime_enable". Furthermore if probe fails after invoking qcom_pcie_host_init() the power-domain will be left referenced. As it is not possible for the error handling in qcom_pcie_host_init() to handle errors happening after returning from that function the pm_runtime_get_sync() is moved to qcom_pcie_probe() as well. Fixes: 854b69efbdd2 ("PCI: qcom: add runtime pm support to pcie_port") Signed-off-by: Bjorn Andersson [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Acked-by: Stanimir Varbanov Signed-off-by: Sasha Levin

PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB

2019-07-31T05:27:07+00:00

[ Upstream commit 381ed79c8655a40268ee7391f716edd90c5c3a97 ] If CONFIG_GPIOLIB is not selected the compilation results in the following build errors: drivers/pci/controller/dwc/pci-dra7xx.c: In function dra7xx_pcie_probe: drivers/pci/controller/dwc/pci-dra7xx.c:777:10: error: implicit declaration of function devm_gpiod_get_optional; did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration] reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); drivers/pci/controller/dwc/pci-dra7xx.c:778:45: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’? reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~ GPIOF_INIT_HIGH Fix them by including the appropriate header file. Reported-by: Hulk Robot Signed-off-by: YueHaibing [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi Acked-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin