kernel/linux.git/drivers/pci/remove.c, branch v6.12.80

Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-09-23T19:47:06+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas) - Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas) - Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki) - Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki) - Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner) Driver binding: - Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner) - Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner) - Request the PCI BAR used by xboxvideo (Philipp Stanner) - Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner) MSI: - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut) - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut) Power management: - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio) PCI device hotplug: - Remove unnecessary hpc_ops struct from shpchp (ngn) - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng) Virtualization: - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) IOMMU: - Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) NPEM: - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) Device trees: - Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li) - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski) Altera PCIe controller driver: - Convert altera DT bindings from text to YAML (Matthew Gerlach) - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan) Broadcom STB PCIe controller driver: - Add DT binding maxItems for reset controllers (Jim Quinlan) - Use the 'bridge' reset method if described in the DT (Jim Quinlan) - Use the 'swinit' reset method if described in the DT (Jim Quinlan) - Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan) - Add support for many inbound DMA windows (Jim Quinlan) - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan) - Add Broadcom 7712 DT description and driver support (Jim Quinlan) - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas) Freescale i.MX6 PCIe controller driver: - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu) - Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu) - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu) - Call phy_power_off() in the .probe() error path (Frank Li) - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li) - Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li) - Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li) - Expand comments for erratum ERR010728 workaround (Frank Li) - Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li) - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li) - Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li) - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li) Loongson PCIe controller driver: - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) Marvell Aardvark PCIe controller driver: - Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas) MediaTek PCIe Gen3 controller driver: - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari) - Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold) - Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli) - Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli) TI J721E PCIe driver: - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli) - Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard) - Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard) - Add j721e suspend and resume support (Théo Lebrun) TI Keystone PCIe controller driver: - Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter) Xilinx NWL PCIe controller driver: - Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) Xilinx XDMA PCIe controller driver: - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) Miscellaneous: - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) - Fix minor kerneldoc issues and typos (Bjorn Helgaas) - Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan) - Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) - Remove unused BILLION macro (zhang jiao)" * tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ...

Merge branch 'pci/controller/qcom'

2024-09-19T19:25:32+00:00

- Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add Manivannan Sadhasivam as maintainer of qcom endpoint driver (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Rename dw_pcie.link_gen to max_link_speed to avoid ambiguity (Manivannan Sadhasivam) - Cache maximum link speed value in dw_pcie.max_link_speed for use by vendor drivers (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) * pci/controller/qcom: PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt dt-bindings: PCI: qcom,pcie-sm8450: Add 'global' interrupt PCI: qcom-ep: Modify 'global_irq' and 'perst_irq' IRQ device names PCI: endpoint: Assign PCI domain number for endpoint controllers dt-bindings: PCI: pci-ep: Document 'linux,pci-domain' property dt-bindings: PCI: pci-ep: Update Maintainers PCI: qcom-ep: Reword the error message for receiving unknown global IRQ event PCI: qcom-ep: Drop the redundant masking of global IRQ events

PCI: Pass domain number to pci_bus_release_domain_nr() explicitly

2024-09-13T22:12:29+00:00

The pci_bus_release_domain_nr() API is supposed to free the domain number allocated by pci_bus_find_domain_nr(). Most of the callers of pci_bus_find_domain_nr(), store the domain number in pci_bus::domain_nr. As such, the pci_bus_release_domain_nr() implicitly frees the domain number by dereferencing 'struct pci_bus'. However, one of the callers of this API, the PCI endpoint subsystem, doesn't have 'struct pci_bus', so it only passes NULL. Due to this, the API will end up dereferencing the NULL pointer. To fix this issue, pass the domain number to this API explicitly. Since 'struct pci_bus' is not used for anything else other than extracting the domain number, it makes sense to pass the domain number directly. Fixes: 0328947c5032 ("PCI: endpoint: Assign PCI domain number for endpoint controllers") Closes: https://lore.kernel.org/linux-pci/c0c40ddb-bf64-4b22-9dd1-8dbb18aa2813@stanley.mountain Link: https://lore.kernel.org/linux-pci/20240912053025.25314-1-manivannan.sadhasivam@linaro.org Reported-by: Dan Carpenter Signed-off-by: Manivannan Sadhasivam [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński

PCI/NPEM: Add Native PCIe Enclosure Management support

2024-09-04T22:25:12+00:00

Native PCIe Enclosure Management (NPEM, PCIe r6.1 sec 6.28) allows managing LEDs in storage enclosures. NPEM is indication oriented and it does not give direct access to LEDs. Although each indication *could* represent an individual LED, multiple indications could also be represented as a single, multi-color LED or a single LED blinking in a specific interval. The specification leaves that open. Each enabled indication (capability register bit on) is represented as a ledclass_dev which can be controlled through sysfs. For every ledclass device only 2 brightness states are allowed: LED_ON (1) or LED_OFF (0). This corresponds to the NPEM control register (Indication bit on/off). Ledclass devices appear in sysfs as child devices (subdirectory) of PCI device which has an NPEM Extended Capability and indication is enabled in NPEM capability register. For example, these are LEDs created for pcieport "10000:02:05.0" on my setup: leds/ ├── 10000:02:05.0:enclosure:fail ├── 10000:02:05.0:enclosure:locate ├── 10000:02:05.0:enclosure:ok └── 10000:02:05.0:enclosure:rebuild They can be also found in "/sys/class/leds" directory. The parent PCIe device domain/bus/device/function address is used to guarantee uniqueness across leds subsystem. To enable/disable a "fail" indication, the "brightness" file can be edited: echo 1 > ./leds/10000:02:05.0:enclosure:fail/brightness echo 0 > ./leds/10000:02:05.0:enclosure:fail/brightness PCIe r6.1, sec 7.9.19.2 defines the possible indications. Multiple indications for same parent PCIe device can conflict and hardware may update them when processing new request. To avoid issues, driver refresh all indications by reading back control register. This driver expects to be the exclusive NPEM extended capability manager. It waits up to 1 second after imposing new request, it doesn't verify if controller is busy before write, and it assumes the mutex lock gives protection from concurrent updates. If _DSM LED management is available, we assume the platform may be using NPEM for its own purposes (see PCI Firmware Spec r3.3 sec 4.7), so the driver does not use NPEM. A future patch will add _DSM support; an info message notes whether NPEM or _DSM is being used. NPEM is a PCIe extended capability so it should be registered in pcie_init_capabilities() but it is not possible due to LED dependency. The parent pci_device must be added earlier for led_classdev_register() to be successful. NPEM does not require configuration on kernel side, so it is safe to register LED devices later. Link: https://lore.kernel.org/r/20240904104848.23480-3-mariusz.tkaczyk@linux.intel.com Suggested-by: Lukas Wunner Signed-off-by: Mariusz Tkaczyk Signed-off-by: Bjorn Helgaas Tested-by: Stuart Hayes Reviewed-by: Christoph Hellwig Reviewed-by: Ilpo Järvinen

PCI: Don't rely on of_platform_depopulate() for reused OF-nodes

2024-09-03T22:10:57+00:00

of_platform_depopulate() doesn't play nicely with reused OF nodes - it ignores the ones that are not marked explicitly as populated and it may happen that the PCI device goes away before the platform device in which case the PCI core clears the OF_POPULATED bit. Unconditionally unregister the platform devices for child nodes when stopping the PCI device. Link: https://lore.kernel.org/r/20240823093323.33450-2-brgl@bgdev.pl Fixes: 8fb18619d910 ("PCI/pwrctl: Create platform devices for child OF nodes of the port node") Signed-off-by: Bartosz Golaszewski Signed-off-by: Bjorn Helgaas Acked-by: Manivannan Sadhasivam

PCI/pwrctl: Create platform devices for child OF nodes of the port node

2024-06-12T11:20:56+00:00

In preparation for introducing PCI device power control - a set of library functions that will allow powering-up of PCI devices before they're detected on the PCI bus - we need to populate the devices defined on the device-tree. We are reusing the platform bus as it provides us with all the infrastructure we need to match the pwrctl drivers against the compatibles from OF nodes. These platform devices will be probed by the driver core and bound to the PCI pwrctl drivers we'll introduce later. Tested-by: Amit Pundir Tested-by: Neil Armstrong # on SM8550-QRD, SM8650-QRD & SM8650-HDK Tested-by: Caleb Connolly # OnePlus 8T Acked-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20240612082019.19161-4-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski

PCI: Create device tree node for bridge

2023-08-22T19:56:09+00:00

The PCI endpoint device such as Xilinx Alveo PCI card maps the register spaces from multiple hardware peripherals to its PCI BAR. Normally, the PCI core discovers devices and BARs using the PCI enumeration process. There is no infrastructure to discover the hardware peripherals that are present in a PCI device, and which can be accessed through the PCI BARs. Apparently, the device tree framework requires a device tree node for the PCI device. Thus, it can generate the device tree nodes for hardware peripherals underneath. Because PCI is self discoverable bus, there might not be a device tree node created for PCI devices. Furthermore, if the PCI device is hot pluggable, when it is plugged in, the device tree nodes for its parent bridges are required. Add support to generate device tree node for PCI bridges. Add an of_pci_make_dev_node() interface that can be used to create device tree node for PCI devices. Add a PCI_DYNAMIC_OF_NODES config option. When the option is turned on, the kernel will generate device tree nodes for PCI bridges unconditionally. Initially, add the basic properties for the dynamically generated device tree nodes which include #address-cells, #size-cells, device_type, compatible, ranges, reg. Acked-by: Bjorn Helgaas Signed-off-by: Lizhi Hou Link: https://lore.kernel.org/r/1692120000-46900-3-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring

Merge tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

2023-04-30T18:51:51+00:00

Pull compute express link updates from Dan Williams: "DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's blessing, and the CXL core continues to mature its media management capabilities with support for listing and injecting media errors. Some late fixes that missed v6.3-final are also included: - Refactor the DOE infrastructure (Data Object Exchange PCI-config-cycle mailbox) to be a facility of the PCI core rather than the CXL core. This is foundational for upcoming support for PCI device-attestation and PCIe / CXL link encryption. - Add support for retrieving and injecting poison for CXL memory expanders. This enabling uses trace-events to convey CXL media error records to user tooling. It includes translation of device-local addresses (DPA) to system physical addresses (SPA) and their corresponding CXL region. - Fixes for decoder enumeration that missed v6.3-final - Miscellaneous fixups" * tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits) cxl/test: Add mock test for set_timestamp cxl/mbox: Update CMD_RC_TABLE tools/testing/cxl: Require CONFIG_DEBUG_FS tools/testing/cxl: Add a sysfs attr to test poison inject limits tools/testing/cxl: Use injected poison for get poison list tools/testing/cxl: Mock the Clear Poison mailbox command tools/testing/cxl: Mock the Inject Poison mailbox command cxl/mem: Add debugfs attributes for poison inject and clear cxl/memdev: Trace inject and clear poison as cxl_poison events cxl/memdev: Warn of poison inject or clear to a mapped region cxl/memdev: Add support for the Clear Poison mailbox command cxl/memdev: Add support for the Inject Poison mailbox command tools/testing/cxl: Mock support for Get Poison List cxl/trace: Add an HPA to cxl_poison trace events cxl/region: Provide region info to the cxl_poison trace event cxl/memdev: Add trigger_poison_list sysfs attribute cxl/trace: Add TRACE support for CXL media-error records cxl/mbox: Add GET_POISON_LIST mailbox command cxl/mbox: Initialize the poison state cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all ...

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2023-04-27T17:45:30+00:00

Pull pci updates from Bjorn Helgaas: "Resource management: - Add pci_dev_for_each_resource() and pci_bus_for_each_resource() iterators PCIe native device hotplug: - Fix AB-BA deadlock between reset_lock and device_lock Power management: - Wait longer for devices to become ready after resume (as we do for reset) to accommodate Intel Titan Ridge xHCI devices - Extend D3hot delay for NVIDIA HDA controllers to avoid unrecoverable devices after a bus reset Error handling: - Clear PCIe Device Status after EDR since generic error recovery now only clears it when AER is native ASPM: - Work around Chromebook firmware defect that clobbers Capability list (including ASPM L1 PM Substates Cap) when returning from D3cold to D0 Freescale i.MX6 PCIe controller driver: - Install imprecise external abort handler only when DT indicates PCIe support Freescale Layerscape PCIe controller driver: - Add ls1028a endpoint mode support Qualcomm PCIe controller driver: - Add SM8550 DT binding and driver support - Add SDX55 DT binding and driver support - Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 - Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 - Add DT "mhi" register region for supported SoCs - Expose link transition counts via debugfs to help debug low power issues - Support system suspend and resume; reduce interconnect bandwidth and turn off clock and PHY if there are no active devices - Enable async probe by default to reduce boot time Miscellaneous: - Sort controller Kconfig entries by vendor" * tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits) PCI: xilinx: Drop obsolete dependency on COMPILE_TEST PCI: mobiveil: Sort Kconfig entries by vendor PCI: dwc: Sort Kconfig entries by vendor PCI: Sort controller Kconfig entries by vendor PCI: Use consistent controller Kconfig menu entry language PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt PCI: hv: Add 'Microsoft' to Kconfig prompt PCI: meson: Add 'Amlogic' to Kconfig prompt PCI: Use of_property_present() for testing DT property presence PCI/PM: Extend D3hot delay for NVIDIA HDA controllers dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties PCI: qcom: Add SM8550 PCIe support dt-bindings: PCI: qcom: Add SM8550 compatible PCI: qcom: Add support for SDX55 SoC dt-bindings: PCI: qcom-ep: Fix the unit address used in example dt-bindings: PCI: qcom: Add SDX55 SoC dt-bindings: PCI: qcom: Update maintainers entry PCI: qcom: Enable async probe by default PCI: qcom: Add support for system suspend and resume PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter ...

PCI/DOE: Create mailboxes on device enumeration

2023-04-18T17:36:58+00:00

Currently a DOE instance cannot be shared by multiple drivers because each driver creates its own pci_doe_mb struct for a given DOE instance. For the same reason a DOE instance cannot be shared between the PCI core and a driver. Moreover, finding out which protocols a DOE instance supports requires creating a pci_doe_mb for it. If a device has multiple DOE instances, a driver looking for a specific protocol may need to create a pci_doe_mb for each of the device's DOE instances and then destroy those which do not support the desired protocol. That's obviously an inefficient way to do things. Overcome these issues by creating mailboxes in the PCI core on device enumeration. Provide a pci_find_doe_mailbox() API call to allow drivers to get a pci_doe_mb for a given (pci_dev, vendor, protocol) triple. This API is modeled after pci_find_capability() and can later be amended with a pci_find_next_doe_mailbox() call to iterate over all mailboxes of a given pci_dev which support a specific protocol. On removal, destroy the mailboxes in pci_destroy_dev(), after the driver is unbound. This allows drivers to use DOE in their ->remove() hook. On surprise removal, cancel ongoing DOE exchanges and prevent new ones from being scheduled. Thereby ensure that a hot-removed device doesn't needlessly wait for a running exchange to time out. Tested-by: Ira Weiny Signed-off-by: Lukas Wunner Reviewed-by: Ming Li Reviewed-by: Ira Weiny Reviewed-by: Jonathan Cameron Acked-by: Bjorn Helgaas Link: https://lore.kernel.org/r/40a6f973f72ef283d79dd55e7e6fddc7481199af.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams