kernel/linux.git/drivers/pci/of.c, branch v6.12.80

Merge tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-07-20T02:03:18+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms required after reset before config access (Kevin Xie) - Define PCIE_T_RRS_READY_MS for the generic 100ms required after reset before config access (probably should be unified with PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal) Resource management: - Rename find_resource() to find_resource_space() to be more descriptive (Ilpo Järvinen) - Export find_resource_space() for use by PCI core, which needs to learn whether there is available space for a bridge window (Ilpo Järvinen) - Prevent double counting of resources so window size doesn't grow on each remove/rescan cycle (Ilpo Järvinen) - Relax bridge window sizing algorithm so a device doesn't break simply because it was removed and rescanned (Ilpo Järvinen) - Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in pci_register_host_bridge() (not acpi_pci_root_create()) so we can unify it with similar DT functionality (Vidya Sagar) - Extend use of DT "linux,pci-probe-only" property so it works per-host bridge as well as globally (Vidya Sagar) - Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT "linux,pci-probe-only" property in pci_preserve_config() (Vidya Sagar) Driver binding: - Add devres infrastructure for managed request and map of partial BAR resources (Philipp Stanner) - Deprecate pcim_iomap_table() because uses like "pcim_iomap_table()[0]" have no good way to return errors (Philipp Stanner) - Add an always-managed pcim_request_region() for use instead of pci_request_region() and similar, which are sometimes managed depending on whether pcim_enable_device() has been called previously (Philipp Stanner) - Reimplement pcim_set_mwi() so it doesn't need to keep store MWI state (Philipp Stanner) - Add pcim_intx() for use instead of pci_intx(), which is sometimes managed depending on whether pcim_enable_device() has been called previously (Philipp Stanner) - Add managed pcim_iomap_range() to allow mapping of a partial BAR (Philipp Stanner) - Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner) Error handling: - Add missing bridge locking in device reset path and add a warning for other possible lock issues (Dan Williams) - Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner) Power management: - Disable AER and DPC during suspend to avoid spurious wakeups if they share an interrupt with PME (Kai-Heng Feng) PCIe native device hotplug: - Detect if a device was removed or replaced during system sleep so we don't assume a new device is the one that used to be there (Lukas Wunner) Virtualization: - Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it prevents transactions between functions even though it doesn't advertise ACS, so the functions can be attached individually via VFIO (Ajit Khaparde) Peer-to-peer DMA: - Add a "pci=config_acs=" kernel command-line parameter to relax default ACS settings to enable additional peer-to-peer configurations. Requires expert knowledge of topology and ACS operation (Vidya Sagar) Endpoint framework: - Remove unused struct pci_epf_group.type_group (Christophe JAILLET) - Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup() (Dan Carpenter) - Make struct pci_epc_class constant (Greg Kroah-Hartman) - Remove unused pci_endpoint_test_bar_{readl,writel} functions (Jiapeng Chong) - Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam) - Rename struct pci_epc_event_ops.core_init() callback to epc_init() (Manivannan Sadhasivam) - Move DMA init to MHI .epc_init() callback for uniformity (Manivannan Sadhasivam) - Cancel EPF test delayed work when link goes down (Manivannan Sadhasivam) - Add struct pci_epc_event_ops.epc_deinit() callback for cleanup needed on fundamental reset (Manivannan Sadhasivam) - Add 64KB alignment to endpoint test to support Rockchip rk3588 (Niklas Cassel) - Optimize endpoint test by using memcpy() instead of readl() (Niklas Cassel) Device tree bindings: - Add generic "ats-supported" property to advertise that a PCIe Root Complex supports ATS (Jean-Philippe Brucker) Amazon Annapurna Labs PCIe controller driver: - Validate IORESOURCE_BUS presence to avoid NULL pointer dereference (Aleksandr Mishin) Axis ARTPEC-6 PCIe controller driver: - Rename .cpu_addr_fixup() parameter to reflect that it is a PCI address, not a CPU address (Niklas Cassel) Freescale i.MX6 PCIe controller driver: - Convert to agnostic GPIO API (Andy Shevchenko) Freescale Layerscape PCIe controller driver: - Make struct mobiveil_rp_ops constant (Christophe JAILLET) - Use new generic dw_pcie_ep_linkdown() to handle link-down events (Manivannan Sadhasivam) HiSilicon Kirin PCIe controller driver: - Convert to agnostic GPIO API (Andy Shevchenko) - Use _scoped() iterator for OF children to ensure refcounts are decremented at loop exit (Javier Carrasco) Intel VMD host bridge driver: - Create sysfs "domain" symlink before downstream devices are exposed to userspace by pci_bus_add_devices() (Jiwei Sun) Loongson PCIe controller driver: - Enable MSI when LS7A is used with new CPUs that have integrated PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can use MSI (Huacai Chen) Microchip AXI PolarFlare PCIe controller driver: - Move pcie-microchip-host.c to a new PLDA directory (Minda Chen) - Factor PLDA generic items out to a common plda,xpressrich3-axi-common.yaml binding (Minda Chen) - Factor PLDA generic data structures and code out to shared pcie-plda.h, pcie-plda-host.c (Minda Chen) - Add PLDA generic interrupt handling with a .request_event_irq() callback for vendor-specific events (Minda Chen) - Add PLDA generic host init/deinit and map bus functions for use by vendor-specific drivers (Minda Chen) - Rework to use PLDA core (Minda Chen) Microsoft Hyper-V host bridge driver: - Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu) NVIDIA Tegra194 PCIe controller driver: - Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert) - Set 64KB inbound ATU alignment restriction (Jon Hunter) Qualcomm PCIe controller driver: - Make the MHI reg region mandatory for X1E80100, since all PCIe controllers have it (Abel Vesa) - Prevent use of uninitialized data and possible error pointer dereference (Dan Carpenter) - Return error, not success, if dev_pm_opp_find_freq_floor() fails (Dan Carpenter) - Add Operating Performance Points (OPP) support to scale performance state based on aggregate link bandwidth to improve SoC power efficiency (Krishna chaitanya chundru) - Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays active even if other drivers don't vote for it (Krishna chaitanya chundru) - Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid writing out all the clock names (Manivannan Sadhasivam) - Add DT binding and driver support for the SA8775P SoC (Mrinmay Sarkar) - Add HDMA support for the SA8775P SoC (Mrinmay Sarkar) - Override the SA8775P NO_SNOOP default to avoid possible memory corruption (Mrinmay Sarkar) - Make sure resources are disabled during PERST# assertion, even if the link is already disabled (Manivannan Sadhasivam) - Use new generic dw_pcie_ep_linkdown() to handle link-down events (Manivannan Sadhasivam) - Add DT and endpoint driver support for the SA8775P SoC (Mrinmay Sarkar) - Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in the EPF MHI driver (Mrinmay Sarkar) - Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP attribute on the SA8775P SoC (both Root Complex and Endpoint mode) to avoid possible memory corruption (Mrinmay Sarkar) Renesas R-Car PCIe controller driver: - Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to avoid unnecessary backtrace (Marek Vasut) - Add DT and driver support for R-Car V4H (R8A779G0) host and endpoint. This requires separate proprietary firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Assert PERST# for 100ms after power is stable (Damien Le Moal) - Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting configuration (Damien Le Moal) - Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware crash on Qcom-based modems with Rockpro64 board (Manivannan Sadhasivam) Rockchip DesignWare PCIe controller driver: - Factor common parts of rockchip-dw-pcie DT binding to be shared by Root Complex and Endpoint mode (Niklas Cassel) - Add missing INTx signals to common DT binding (Niklas Cassel) - Add eDMA items to DT binding for Endpoint controller (Niklas Cassel) - Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary short assert/deassert that causes issues with some WLAN controllers (Niklas Cassel) - Refactor dw-rockchip and add support for Endpoint mode (Niklas Cassel) - Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify() wrapper (Niklas Cassel) - Add error messages in .probe() error paths to improve user experience (Uwe Kleine-König) Samsung Exynos PCIe controller driver: - Use bulk clock APIs to simplify clock setup (Shradha Todi) StarFive PCIe controller driver: - Add DT binding and driver support for the StarFive JH7110 PLDA-based PCIe controller (Minda Chen) Synopsys DesignWare PCIe controller driver: - Add generic support for sending PME_Turn_Off when system suspends (Frank Li) - Fix incorrect interpretation of iATU slot 0 after PERST# assert/deassert (Frank Li) - Use msleep() instead of usleep_range() while waiting for link (Konrad Dybcio) - Refactor dw_pcie_edma_find_chip() to enable adding support for Hyper DMA (HDMA) (Manivannan Sadhasivam) - Enable drivers to supply the eDMA channel count since some can't auto detect this (Manivannan Sadhasivam) - Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify() wrapper (Manivannan Sadhasivam) - Pass the eDMA mapping format directly from drivers instead of maintaining a capability for it (Manivannan Sadhasivam) - Add generic dw_pcie_ep_linkdown() to notify EPF drivers about link-down events and restore non-sticky DWC registers lost on link down (Manivannan Sadhasivam) - Add vendor-specific "apb" reg name, interrupt names, INTx names to generic binding (Niklas Cassel) - Enforce DWC restriction that 64-bit BARs must start with an even-numbered BAR (Niklas Cassel) - Consolidate args of dw_pcie_prog_outbound_atu() into a structure (Yoshihiro Shimoda) - Add support for endpoints to send Message TLPs, e.g., for INTx emulation (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Rename .cpu_addr_fixup() parameter to reflect that it is a PCI address, not a CPU address (Niklas Cassel) TI Keystone PCIe controller driver: - Validate IORESOURCE_BUS presence to avoid NULL pointer dereference (Aleksandr Mishin) - Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and causes processor hangs by limiting Max_Read_Request_Size (MRRS) and Max_Payload_Size (MPS) (Kishon Vijay Abraham I) - Leave BAR 0 disabled for AM654x to fix a regression caused by 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus"), which caused a 45-second boot delay (Siddharth Vadapalli) Xilinx Versal CPM PCIe controller driver: - Fix overlapping bridge registers and 32-bit BAR addresses in DT binding (Thippeswamy Havalige) MicroSemi Switchtec management driver: - Make struct switchtec_class constant (Greg Kroah-Hartman) Miscellaneous: - Remove unused struct acpi_handle_node (Dr. David Alan Gilbert) - Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)" * tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (154 commits) PCI: loongson: Enable MSI in LS7A Root Complex PCI: Extend ACS configurability PCI: Add missing bridge lock to pci_bus_lock() drm/vboxvideo: fix mapping leaks PCI: Add managed pcim_iomap_range() PCI: Remove legacy pcim_release() PCI: Add managed pcim_intx() PCI: vmd: Create domain symlink before pci_bus_add_devices() PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq() PCI: qcom: Prevent potential error pointer dereference PCI: qcom: Fix missing error code in qcom_pcie_probe() PCI: Give pcim_set_mwi() its own devres cleanup callback PCI: Move struct pci_devres.pinned bit to struct pci_dev PCI: Remove struct pci_devres.enabled status bit PCI: Document hybrid devres hazards PCI: Add managed pcim_request_region() PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all() PCI: Add managed partial-BAR request and map infrastructure PCI: Add devres helpers for iomap table PCI: Add and use devres helper for bit masks ...

PCI/pwrctl: Reuse the OF node for power controlled devices

2024-06-12T11:20:56+00:00

With PCI power control we deal with two struct device objects bound to two different drivers but consuming the same OF node. We must not bind the pinctrl twice. To that end: before setting the OF node of the newly instantiated PCI device, check if a platform device consuming the same OF node doesn't already exist on the platform bus and - if so - mark the PCI device as reusing the OF node. Tested-by: Amit Pundir Tested-by: Neil Armstrong # on SM8550-QRD, SM8650-QRD & SM8650-HDK Tested-by: Caleb Connolly # OnePlus 8T Acked-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20240612082019.19161-3-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski

PCI: of: Add of_pci_preserve_config() for per-host bridge support

2024-06-03T21:17:36+00:00

Add of_pci_preserve_config() to look for the "linux,pci-probe-only" property under a specified node. If it's not found there, look under "of_chosen" in addition. If the caller didn't specify a node, look under "of_chosen". With a future patch, this will support "linux,pci-probe-only" on a per host bridge basis based on the presence of the property in the respective PCI host bridge DT node. Implement of_pci_check_probe_only() using of_pci_preserve_config(). Link: https://lore.kernel.org/r/20240508174138.3630283-3-vidyas@nvidia.com Signed-off-by: Vidya Sagar Signed-off-by: Bjorn Helgaas

PCI: of: Destroy changeset when adding PCI device node fails

2023-09-29T22:33:51+00:00

Previously of_pci_make_dev_node() leaked a cset if it failed to create a device node for the PCI device with of_changeset_create_node(). Destroy the cset if of_changeset_create_node() fails. Fixes: 407d1a51921e ("PCI: Create device tree node for bridge") Link: https://lore.kernel.org/r/1696007417-42059-1-git-send-email-lizhi.hou@amd.com Reported-by: Herve Codina Closes: https://lore.kernel.org/all/20230911171319.495bb837@bootlin.com/ Signed-off-by: Lizhi Hou [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Herve Codina

Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2023-08-30T23:59:03+00:00

Pull devicetree updates from Rob Herring: "DT core: - Add support for generating DT nodes for PCI devices. This is the groundwork for applying overlays to PCI devices containing non-discoverable downstream devices. - DT unittest additions to check reverted changesets, to test for refcount issues, and to test unresolved symbols. Also, various clean-ups of the unittest along the way. - Refactor node and property manipulation functions to better share code with old API and changeset API - Refactor changeset print functions to a common implementation - Move some platform_device specific functions into of_platform.c Bindings: - Treewide fixing of typos - Treewide clean-up of SPDX tags to use 'OR' consistently - Last chunk of dropping unnecessary quotes. With that, the check for unnecessary quotes is enabled in yamllint. - Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi bindings to DT schema format - Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings - Fixes for Rockchip DWC PCI binding - Ensure all properties are evaluated on USB connector schema - Fix dt-check-compatible script to find of_device_id instances with compiler annotations" * tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) dt-bindings: usb: Add V3s compatible string for OHCI dt-bindings: usb: Add V3s compatible string for EHCI dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B dt-bindings: vendor-prefixes: document Saef Technology dt-bindings: thermal: lmh: update maintainer address of: unittest: Fix of_unittest_pci_node() kconfig dependencies dt-bindings: crypto: ice: Document sm8450 inline crypto engine dt-bindings: ufs: qcom: Add ICE to sm8450 example dt-bindings: ufs: qcom: Add sm6115 binding dt-bindings: ufs: qcom: Add reg-names property for ICE dt-bindings: yamllint: Enable quoted string check dt-bindings: Drop remaining unneeded quotes of: unittest-data: Fix whitespace - angular brackets of: unittest-data: Fix whitespace - indentation of: unittest-data: Fix whitespace - blank lines of: unittest-data: Convert remaining overlay DTS files to sugar syntax of: overlay: unittest: Add test for unresolved symbol of: unittest: Add separators to of_unittest_overlay_high_level() of: unittest: Cleanup partially-applied overlays of: unittest: Merge of_unittest_apply{,_revert}_overlay_check() ...

PCI: Create device tree node for bridge

2023-08-22T19:56:09+00:00

The PCI endpoint device such as Xilinx Alveo PCI card maps the register spaces from multiple hardware peripherals to its PCI BAR. Normally, the PCI core discovers devices and BARs using the PCI enumeration process. There is no infrastructure to discover the hardware peripherals that are present in a PCI device, and which can be accessed through the PCI BARs. Apparently, the device tree framework requires a device tree node for the PCI device. Thus, it can generate the device tree nodes for hardware peripherals underneath. Because PCI is self discoverable bus, there might not be a device tree node created for PCI devices. Furthermore, if the PCI device is hot pluggable, when it is plugged in, the device tree nodes for its parent bridges are required. Add support to generate device tree node for PCI bridges. Add an of_pci_make_dev_node() interface that can be used to create device tree node for PCI devices. Add a PCI_DYNAMIC_OF_NODES config option. When the option is turned on, the kernel will generate device tree nodes for PCI bridges unconditionally. Initially, add the basic properties for the dynamically generated device tree nodes which include #address-cells, #size-cells, device_type, compatible, ranges, reg. Acked-by: Bjorn Helgaas Signed-off-by: Lizhi Hou Link: https://lore.kernel.org/r/1692120000-46900-3-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring

PCI: move OF status = "disabled" detection to dev->match_driver

2023-08-09T08:18:30+00:00

The blamed commit has broken probing on arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi when &enetc_port0 (PCI function 0) has status = "disabled". Background: pci_scan_slot() has logic to say that if the function 0 of a device is absent, the entire device is absent and we can skip the other functions entirely. Traditionally, this has meant that pci_bus_read_dev_vendor_id() returns an error code for that function. However, since the blamed commit, there is an extra confounding condition: function 0 of the device exists and has a valid vendor id, but it is disabled in the device tree. In that case, pci_scan_slot() would incorrectly skip the entire device instead of just that function. In the case of NXP LS1028A, status = "disabled" does not mean that the PCI function's config space is not available for reading. It is, but the Ethernet port is just not functionally useful with a particular SerDes protocol configuration (0x9999) due to pinmuxing constraints of the Soc. So, pci_scan_slot() skips all other functions on the ENETC ECAM (enetc_port1, enetc_port2, enetc_mdio_pf3 etc) when just enetc_port0 had to not be probed. There is an additional regression introduced by the change, caused by its fundamental premise. The enetc driver needs to run code for all PCI functions, regardless of whether they're enabled or not in the device tree. That is no longer possible if the driver's probe function is no longer called. But Rob recommends that we move the of_device_is_available() detection to dev->match_driver, and this makes the PCI fixups still run on all functions, while just probing drivers for those functions that are enabled. So, a separate change in the enetc driver will have to move the workarounds to a PCI fixup. Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status") Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/ Suggested-by: Rob Herring Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

PCI: of: Propagate firmware node by calling device_set_node()

2023-06-06T22:15:45+00:00

Insulate pci_set_of_node() and pci_set_bus_of_node() from possible changes to fwnode_handle implementation by using device_set_node() instead of open-coding dev->dev.fwnode assignments. Link: https://lore.kernel.org/r/20230421100939.68225-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko Signed-off-by: Bjorn Helgaas

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2023-04-27T17:45:30+00:00

Pull pci updates from Bjorn Helgaas: "Resource management: - Add pci_dev_for_each_resource() and pci_bus_for_each_resource() iterators PCIe native device hotplug: - Fix AB-BA deadlock between reset_lock and device_lock Power management: - Wait longer for devices to become ready after resume (as we do for reset) to accommodate Intel Titan Ridge xHCI devices - Extend D3hot delay for NVIDIA HDA controllers to avoid unrecoverable devices after a bus reset Error handling: - Clear PCIe Device Status after EDR since generic error recovery now only clears it when AER is native ASPM: - Work around Chromebook firmware defect that clobbers Capability list (including ASPM L1 PM Substates Cap) when returning from D3cold to D0 Freescale i.MX6 PCIe controller driver: - Install imprecise external abort handler only when DT indicates PCIe support Freescale Layerscape PCIe controller driver: - Add ls1028a endpoint mode support Qualcomm PCIe controller driver: - Add SM8550 DT binding and driver support - Add SDX55 DT binding and driver support - Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 - Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 - Add DT "mhi" register region for supported SoCs - Expose link transition counts via debugfs to help debug low power issues - Support system suspend and resume; reduce interconnect bandwidth and turn off clock and PHY if there are no active devices - Enable async probe by default to reduce boot time Miscellaneous: - Sort controller Kconfig entries by vendor" * tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits) PCI: xilinx: Drop obsolete dependency on COMPILE_TEST PCI: mobiveil: Sort Kconfig entries by vendor PCI: dwc: Sort Kconfig entries by vendor PCI: Sort controller Kconfig entries by vendor PCI: Use consistent controller Kconfig menu entry language PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt PCI: hv: Add 'Microsoft' to Kconfig prompt PCI: meson: Add 'Amlogic' to Kconfig prompt PCI: Use of_property_present() for testing DT property presence PCI/PM: Extend D3hot delay for NVIDIA HDA controllers dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties PCI: qcom: Add SM8550 PCIe support dt-bindings: PCI: qcom: Add SM8550 compatible PCI: qcom: Add support for SDX55 SoC dt-bindings: PCI: qcom-ep: Fix the unit address used in example dt-bindings: PCI: qcom: Add SDX55 SoC dt-bindings: PCI: qcom: Update maintainers entry PCI: qcom: Enable async probe by default PCI: qcom: Add support for system suspend and resume PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter ...

PCI: Restrict device disabled status check to DT

2023-04-20T18:30:14+00:00

Commit 6fffbc7ae137 ("PCI: Honor firmware's device disabled status") checked the firmware device status for both DT and ACPI devices. That caused a regression in some ACPI systems. The exact reason isn't clear. It's possibly a firmware bug. For now, at least, refactor the check to be for DT based systems only. Note that the original implementation leaked a refcount which is now correctly handled. [bhelgaas: Per ACPI r6.5, sec 6.3.7, for devices on an enumerable bus, _STA must return with bit[0] ("device is present") set] Link: https://lore.kernel.org/all/m2fs9lgndw.fsf@gmail.com/ Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status") Link: https://lore.kernel.org/r/20230419193513.708818-1-robh@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217317 Reported-by: Donald Hunter Reported-by: Vitaly Kuznetsov Tested-by: Donald Hunter Tested-by: Vitaly Kuznetsov Signed-off-by: Rob Herring Signed-off-by: Bjorn Helgaas Cc: Binbin Zhou Cc: Liu Peibao Cc: Huacai Chen