kernel/linux.git/drivers/pci/hotplug, branch v4.11.5

sched/headers: Prepare to move signal wakeup & sigpending methods from into

2017-03-02T07:42:32+00:00

Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

Merge tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2017-03-01T18:10:16+00:00

Pull more powerpc updates from Michael Ellerman: "Highlights include: - an update of the disassembly code used by xmon to the latest versions in binutils. We've received permission from all the authors of the relevant binutils changes to relicense their changes to the relevant files from GPLv3 to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg work to get permission from everyone. - addition of the "architected" Power9 CPU table entry, allowing us to boot in Power9 architected mode under a hypervisor. - updates to the Power9 PMU code. - implementation of clear_bit_unlock_is_negative_byte() to optimise unlock_page(). - Freescale updates from Scott: "Highlights include 8xx breakpoints and perf, t1042rdb display support, and board updates." Thanks to: Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith" * tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc: Remove leftover cputime_to_nsecs call causing build error powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU powerpc/optprobes: Fix TOC handling in optprobes trampoline powerpc/pseries: Advertise Hot Plug Event support to firmware cxl: fix nested locking hang during EEH hotplug powerpc/xmon: Dump memory in CPU endian format powerpc/pseries: Revert 'Auto-online hotplugged memory' powerpc/powernv: Make PCI non-optional powerpc/64: Implement clear_bit_unlock_is_negative_byte() powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable() powerpc/kernel: Remove error message in pcibios_setup_phb_resources() powerpc/mm: Fix typo in set_pte_at() pci/hotplug/pnv-php: Disable MSI and PCI device properly pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot() powerpc: Add POWER9 architected mode to cputable powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags() powerpc/perf: Avoid FAB_*_MATCH checks for power9 powerpc/perf: Add restrictions to PMC5 in power9 DD1 powerpc/perf: Use Instruction Counter value ...

Merge tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-02-23T19:53:22+00:00

Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-02-20T21:23:30+00:00

Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Implement wraparound-safe refcount_t and kref_t types based on generic atomic primitives (Peter Zijlstra) - Improve and fix the ww_mutex code (Nicolai Hähnle) - Add self-tests to the ww_mutex code (Chris Wilson) - Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr Bueso) - Micro-optimize the current-task logic all around the core kernel (Davidlohr Bueso) - Tidy up after recent optimizations: remove stale code and APIs, clean up the code (Waiman Long) - ... plus misc fixes, updates and cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) fork: Fix task_struct alignment locking/spinlock/debug: Remove spinlock lockup detection code lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS lkdtm: Convert to refcount_t testing kref: Implement 'struct kref' using refcount_t refcount_t: Introduce a special purpose refcount type sched/wake_q: Clarify queue reinit comment sched/wait, rcuwait: Fix typo in comment locking/mutex: Fix lockdep_assert_held() fail locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock() locking/rwsem: Reinit wake_q after use locking/rwsem: Remove unnecessary atomic_long_t casts jump_labels: Move header guard #endif down where it belongs locking/atomic, kref: Implement kref_put_lock() locking/ww_mutex: Turn off __must_check for now locking/atomic, kref: Avoid more abuse locking/atomic, kref: Use kref_get_unless_zero() more locking/atomic, kref: Kill kref_sub() locking/atomic, kref: Add kref_read() locking/atomic, kref: Add KREF_INIT() ...

pci/hotplug/pnv-php: Disable MSI and PCI device properly

2017-02-17T11:13:29+00:00

pnv_php_disable_irq() can be called in two paths: Bailing path in pnv_php_enable_irq() or releasing slot. The MSI (or MSIx) interrupts is disabled unconditionally in pnv_php_disable_irq(). It's wrong because that might be enabled by drivers other than pnv-php. This disables MSI (or MSIx) interrupts and the PCI device only if it was enabled by pnv-php. In the error path of pnv_php_enable_irq(), we rely on the newly added parameter @disable_device. In the path of releasing slot, @pnv_php->irq is checked. Cc: # v4.9+ Fixes: 360aebd85a4c ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Signed-off-by: Gavin Shan Reviewed-by: Andrew Donnellan Signed-off-by: Michael Ellerman

pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts

2017-02-17T11:13:28+00:00

The root port or PCIe switch downstream port might have been associated with driver other than pnv-php. The MSI or MSIx might also have been enabled by that driver (e.g. pcieport_drv). Attempt to enable MSI incurs below backtrace: PowerPC PowerNV PCI Hotplug Driver version: 0.1 ------------[ cut here ]------------ WARNING: CPU: 19 PID: 1004 at drivers/pci/msi.c:1071 \ __pci_enable_msi_range+0x84/0x4e0 NIP [c000000000665c34] __pci_enable_msi_range+0x84/0x4e0 LR [c000000000665c24] __pci_enable_msi_range+0x74/0x4e0 Call Trace: [c000000384d67600] [c000000000665c24] __pci_enable_msi_range+0x74/0x4e0 [c000000384d676e0] [d00000000aa31b04] pnv_php_register+0x564/0x5a0 [pnv_php] [c000000384d677c0] [d00000000aa31658] pnv_php_register+0xb8/0x5a0 [pnv_php] [c000000384d678a0] [d00000000aa31658] pnv_php_register+0xb8/0x5a0 [pnv_php] [c000000384d67980] [d00000000aa31dfc] pnv_php_init+0x60/0x98 [pnv_php] [c000000384d679f0] [c00000000000cfdc] do_one_initcall+0x6c/0x1d0 [c000000384d67ab0] [c000000000b92354] do_init_module+0x94/0x254 [c000000384d67b40] [c00000000019719c] load_module+0x258c/0x2c60 [c000000384d67d30] [c000000000197bb0] SyS_finit_module+0xf0/0x170 [c000000384d67e30] [c00000000000b184] system_call+0x38/0xe0 This fixes the issue by skipping enabling the surprise hotplug capability if the MSI or MSIx on the PCI slot's upstream port has been enabled by other driver. Cc: # v4.9+ Fixes: 360aebd85a4c ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Signed-off-by: Gavin Shan Reviewed-by: Andrew Donnellan Tested-by: Vaibhav Jain Signed-off-by: Michael Ellerman

pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot()

2017-02-17T11:13:27+00:00

The WARN_ON() causes unnecessary backtrace when putting the parent slot, which is likely to be NULL. WARNING: CPU: 2 PID: 1071 at drivers/pci/hotplug/pnv_php.c:85 \ pnv_php_release+0xcc/0x150 [pnv_php] : Call Trace: [c0000003bc007c10] [d00000000ad613c4] pnv_php_release+0x144/0x150 [pnv_php] [c0000003bc007c40] [c0000000006641d8] pci_hp_deregister+0x238/0x330 [c0000003bc007cd0] [d00000000ad61440] pnv_php_unregister_one+0x70/0xa0 [pnv_php] [c0000003bc007d10] [d00000000ad614c0] pnv_php_unregister+0x50/0x80 [pnv_php] [c0000003bc007d40] [d00000000ad61e84] pnv_php_exit+0x50/0xcb4 [pnv_php] [c0000003bc007d70] [c00000000019499c] SyS_delete_module+0x1fc/0x2a0 [c0000003bc007e30] [c00000000000b184] system_call+0x38/0xe0 Cc: # v4.8+ Fixes: 66725152fb9f ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver") Signed-off-by: Gavin Shan Reviewed-by: Andrew Donnellan Tested-by: Vaibhav Jain Signed-off-by: Michael Ellerman

drivers/pci/hotplug: Mask PDC interrupt if required

2017-02-15T09:02:43+00:00

We're supporting surprise hotplug on PCI slots behind root port or PCIe switch downstream ports, which don't claim the capability in hardware register (offset: PCIe cap + PCI_EXP_SLTCAP). PEX8718 is one of the examples. For those PCI slots, the PDC (Presence Detection Change) event isn't reliable and the underly (skiboot) firmware has best judgement. This masks the PDC event when skiboot requests by "ibm,slot-broken-pdc" property in PCI slot's device-tree node. Reported-by: Hank Chang Signed-off-by: Gavin Shan Tested-by: Willie Liauw Signed-off-by: Michael Ellerman

drivers/pci/hotplug: Fix initial state for empty slot

2017-02-15T09:02:43+00:00

In PowerNV PCI hotplug driver, the initial PCI slot's state is set to PNV_PHP_STATE_POPULATED if no PCI devices are connected to the slot. The PCI devices that are hot added to the slot won't be probed and populated because of the check in pnv_php_enable(): /* Check if the slot has been configured */ if (php_slot->state != PNV_PHP_STATE_REGISTERED) return 0; This fixes the issue by leaving the slot in PNV_PHP_STATE_REGISTERED state initially if nothing is connected to the slot. Fixes: 360aebd85a4 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Cc: stable@vger.kernel.org #v4.9+ Reported-by: Hank Chang Signed-off-by: Gavin Shan Tested-by: Willie Liauw Signed-off-by: Michael Ellerman

drivers/pci/hotplug: Handle presence detection change properly

2017-02-15T09:02:43+00:00

The surprise hotplug is driven by interrupt in PowerNV PCI hotplug driver. In the interrupt handler, pnv_php_interrupt(), we bail when pnv_pci_get_presence_state() returns zero wrongly. It causes the presence change event is always ignored incorrectly. This fixes the issue by bailing on error (non-zero value) returned from pnv_pci_get_presence_state(). Fixes: 360aebd85a4 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Cc: stable@vger.kernel.org #v4.9+ Reported-by: Hank Chang Signed-off-by: Gavin Shan Tested-by: Willie Liauw Signed-off-by: Michael Ellerman